Indledning
This manual provides essential information for the proper installation, operation, and maintenance of your MTX Audio Dual 12" Vented Subwoofer Enclosure (Model TNE212DV). Please read thoroughly before use to ensure optimal performance and longevity of your product.
Figure 1: MTX Audio Dual 12" Vented Subwoofer Enclosure
Nøglefunktioner
- Vented Design: Purpose-driven vented enclosure meticulously tuned for powerful and impactful bass, ensuring harder-hitting lows.
- Høj effekt: Robust output of 2,000 watts maximum power and 1,000 watts RMS power for an immersive audio experience with optimal clarity and depth.
- Dual 12-inch Subwoofers: Two powerful 12-inch subwoofers designed to elevate auditory experience with deep bass.
- Holdbar konstruktion: Features polypropylene dust caps for durability, lightweight design, and minimized power consumption.
- Slank æstetik: Incorporates the MTX audio logo on the dust cap and elegant embroidery of the Terminator logo on rich black carpeting.
Opsætning og installation
Proper setup is crucial for achieving the best performance from your subwoofer enclosure. Follow these guidelines for installation.
1. Udpakning og inspektion
Fjern forsigtigt alle komponenter fra emballagen. Kontroller, at alle medfølgende dele er til stede:
- Dual 12" Vented Subwoofer Enclosure
Inspect the enclosure and subwoofers for any signs of damage during shipping. If any damage is found, contact your dealer immediately.
2. Placering
The MTX Audio TNE212DV is designed for floor standing mounting within your vehicle. Consider the following for optimal placement:
- Ensure the enclosure is securely placed to prevent movement during vehicle operation.
- Allow adequate space around the enclosure for proper air circulation, especially around the vented ports.
- The enclosure dimensions are 13.5"D x 29.5"W x 14"H.
Figur 2: Kapslingsdimensioner
Figure 3: Subwoofer Enclosure in Vehicle Trunk
3. AmpLifier Matching
This dual subwoofer enclosure has an impedance of 2 Ohms and handles 1000 Watts RMS power (2000 Watts Max). It is crucial to match your amplifier's output to these specifications for optimal performance and to prevent damage.
- Vælg en amplifier capable of delivering approximately 1000 Watts RMS at a 2 Ohm load.
- Ved hjælp af en amplifier with significantly lower or higher RMS output than the subwoofer's rating can lead to poor sound quality or damage.
4. Ledningsforbindelser
The enclosure features gold-plated push-style speaker wire terminals for easy connection. Ensure proper polarity (+ to + and - to -) when connecting to your amplivligere.
- Use appropriate gauge speaker wire for the power levels and distance to the amplivligere.
- Press down on the terminal lever, insert the stripped end of the speaker wire, and release the lever to secure the connection.
- Verify that no stray wire strands are touching, which could cause a short circuit.
Figure 4: Speaker Wire Terminals
5. Amplifier Setup (General Guidance)
Once connected, refer to your amplifier's manual for specific setup instructions. General settings include:
- Gain Control: Juster amplifier's gain to match the output voltage of your head unit. Start low and gradually increase until distortion is heard, then back off slightly.
- Lavpasfilter (LPF): Set the LPF to filter out high frequencies, allowing only bass frequencies to pass to the subwoofer. A common starting point is 80-100 Hz.
- Subsonisk filter: If available, set the subsonic filter to protect the subwoofer from playing frequencies below its resonant frequency, which can cause damage.
- Bass Boost: Use sparingly, if at all, to avoid excessive distortion and potential damage.
Opsætning af videoer
Video 1: General Subwoofer Setup and Demo (RV1212P)
Denne video giver et generelt overblikview of subwoofer setup and demonstration, applicable for understanding basic principles.
Video 2: RV Series Overview
En overview of the RV series, offering insights into the product line's features and design.
Video 3: How to Set Up Enclosures (DV12K6)
This video demonstrates the setup process for similar enclosures, providing valuable general installation guidance.
Video 4: MTX Speakers Subwoofer Demonstration
A demonstration of MTX subwoofers, showcasing their performance.
Betjeningsvejledning
As a passive subwoofer enclosure, the MTX Audio TNE212DV does not have direct operating controls. Its performance is managed entirely by the connected amplifier and your head unit.
- Lydstyrkekontrol: Adjust the overall system volume via your head unit.
- Bas niveau: Fine-tune the bass output using the bass level control on your head unit or a remote bass knob connected to your amplivligere.
- Indbrudsperiode: Allow a break-in period of approximately 10-20 hours of moderate listening before operating at high volumes. This allows the subwoofer's suspension to loosen up and perform optimally.
Opretholdelse
Regular maintenance ensures the longevity and consistent performance of your subwoofer enclosure.
- Rensning: Use a soft, dry cloth or a vacuum cleaner with a brush attachment to clean the carpeted exterior. Avoid using harsh chemicals or abrasive cleaners.
- Tilslutningskontrol: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to signal loss or damage.
- Miljøpleje: Protect the enclosure from extreme temperatures, direct sunlight, and moisture.
Fejlfinding
If you experience issues with your subwoofer enclosure, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd | Løse eller forkerte ledningsforbindelser AmpLifier ikke tændt Head unit not sending signal | Check all speaker wire connections at the enclosure and amplivligere. Verificere ampstrøm til forsyning og fjernbetjent tænding. Ensure head unit is sending an audio signal. |
| Forvrænget lyd | AmpForstærkningen er indstillet for højt Ukorrekt amplifier settings (LPF, bass boost) Beskadiget subwoofer | Reducere amplifierforstærkning indtil forvrængningen forsvinder. Adjust LPF and bass boost settings according to ampmanual til lifter. Inspect subwoofer cones for physical damage. |
| Svag basgengivelse | AmpForstærkningen er indstillet for lavt Forkert LPF-indstilling Faseproblemer | Øge amplifer gevinst gradvist. Adjust LPF to a suitable frequency (e.g., 80-100 Hz). Check amplifier's phase switch (0° or 180°). |
Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | MTX |
| Modelnavn | TERMINATOR |
| Varemodelnummer | TNE212DV |
| Højttaler type | Subwoofer |
| Subwoofer diameter | 12 tommer (x2) |
| Højttaler Maksimal udgangseffekt | 2000 watt |
| RMS-strøm | 1000 watt |
| Impedans | 2 Ohm |
| Produktdimensioner | 13.5" D x 29.5" B x 14" H |
| Varens vægt | 53 pund |
| Materiale | Plastic, Nylon/Polyester |
| Monteringstype | Floor Standing |
| Forbindelsesteknologi | Kablet |
| Speciel funktion | Hi-Res lyd |
| UPC | 715442550135 |
Garantioplysninger
This MTX Audio product comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official warranty documentation provided with your product or visit the MTX Audio webwebsted.
Kundesupport
For any questions, technical assistance, or support regarding your MTX Audio Dual 12" Vented Subwoofer Enclosure, please contact MTX Audio customer service. Refer to the official MTX Audio webwebstedet eller produktemballagen for aktuelle kontaktoplysninger.
