1. Introduktion
This manual provides detailed instructions for the setup, operation, and maintenance of your CallToU Wireless Caregiver Pager System. This system is designed to facilitate communication and assistance in various environments, including homes, clinics, nursing stations, and restaurants. It features a receiver with digital display and voice announcement, paired with waterproof call buttons.
Image 1.1: CallToU Wireless Caregiver Pager System components, including the receiver and five call buttons.
Billede 1.2: Eks.amples of the system's application in different care settings.
2. Opsætning
2.1 Udpakning og komponentkontrol
Before proceeding with setup, ensure all components are present:
- 1 x modtagerenhed
- 5 x Call Buttons
- 1 x strømadapter til modtager
- 1 x Screwdriver (for call button battery access)
- Number Stickers (for button identification)
- Screws and Anchors (for mounting)
2.2 Installation af modtager
- Connect the power adapter to the receiver's power input port.
- Sæt strømadapteren i en almindelig stikkontakt.
- Extend the antenna on the receiver for optimal signal reception.
- Position the receiver in a central location within the desired coverage area, away from large metal objects or other sources of interference.
2.3 Installation af opkaldsknap
Call buttons come with pre-installed 12V 23A alkaline batteries. They can be installed using two methods:
- Klæbende montering: Use the provided adhesive stickers to attach buttons to flat, clean surfaces such as walls or bed frames.
- Anvendelse af snor: Attach a lanyard (not included) through the designated loop on the call button for wearable use.
2.4 Pairing and Programming
The system typically comes pre-paired. If re-pairing or adding new buttons, follow these general steps. Refer to the detailed instructions manual for specific button sequences.
- Enter programming mode on the receiver (usually by pressing a 'SET' or 'FUN' button).
- Press the call button you wish to pair. The receiver should register the button.
- Assign a number to the paired button using the receiver's controls. Use the provided number stickers to label the physical buttons for easy identification.
- Afslut programmeringstilstand.
Image 2.1: Receiver overview with controls and included accessories.
3. Betjeningsvejledning
3.1 Grundlæggende betjening
To initiate a call, simply press the 'CALL' button on any of the wireless transmitters. The receiver will then display the corresponding call number and announce it verbally.
Image 3.1: Call button activation and receiver response.
3.2 Modtagerfunktioner
- Digital skærm: Shows the number of the calling button.
- Stemmemeddelelse: Verbally announces the calling number.
- Adjustable Announcements: The number of voice announcements can be set to repeat multiple times.
- Adjustable Display Time: The duration for which the call number stays on the display can be configured.
- Lydstyrkekontrol: Receiveren tilbyder 8 niveauer af lydstyrkejustering.
3.3 Udvidelse af systemet
The CallToU Wireless Caregiver Pager System is expandable and can pair with up to 1000 call buttons. Additional receivers can also be added to cover larger areas or multiple monitoring stations.
Image 3.2: Multiple call buttons in use, demonstrating sequential call display and announcement.
4. Vedligeholdelse
4.1 Udskiftning af batteri i opkaldsknappen
Each call button uses a 12V 23A alkaline battery. When the button's signal weakens or it stops functioning, the battery may need replacement.
- Use the included small screwdriver to carefully open the call button casing.
- Remove the old battery and insert a new 12V 23A alkaline battery, ensuring correct polarity.
- Luk casing sikkert.
Image 4.1: Call button features, including replaceable battery and IP55 waterproof rating.
4.2 Rengøring
Wipe the receiver and call buttons with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the device openings. Do not use abrasive cleaners or solvents.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Receiver not powering on | Strømadapteren er frakoblet eller der er en defekt stikkontakt. | Check power adapter connection and try a different outlet. |
| Call button not triggering receiver | Button out of range, low battery, or not paired. | Move button closer to receiver. Replace battery. Re-pair the button (refer to Section 2.4). |
| Weak signal or intermittent calls | Obstructions, interference, or antenna not extended. | Ensure receiver antenna is fully extended. Relocate receiver or call button to minimize obstructions. |
| Voice announcement unclear or too quiet | Lydstyrkeindstillingen er for lav. | Adjust receiver volume using the control buttons. |
6. Specifikationer
- Modelnummer: 43237-173146
- ASIN: B07C1H4J5D
- Fabrikant: Ring til os
- Trådløs rækkevidde: Op til 300 meter i åbne områder
- Udvidelsesmuligheder: Supports up to 1000 call buttons
- Batteri til opkaldsknappen: 12V 23A Alkaline (included)
- Vandtæthedsklassificering for opkaldsknappen: IP55
- Driftstemperatur: -22°F til 158°F (-30°C til 70°C)
- Modtagerens dimensioner: Approximately 6.3 x 4.3 inches (16cm x 11cm)
- Varens vægt: 1.52 pund
- Pakkedimensioner: 9.61 x 6.06 x 3.23 tommer
- Dato først tilgængelig: 31. januar 2018
Image 6.1: System range and expandability.
7. Garanti og support
For warranty information, technical support, or service inquiries, please contact CallToU customer support directly. Contact details can typically be found on the manufacturer's official webwebstedet eller via din købsdokumentation.
