Rockville W12K6D2 V2 12-tommer dobbelt 2-ohm bilhøjttalere med subwoofere, brugsanvisning

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Rockville W12K6D2 V2 12-Inch Dual 2-Ohm Car Audio Subwoofers. Designed for powerful and precise bass reproduction, these subwoofers are engineered for car audio enthusiasts seeking high-performance low-end sound. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

2. Nøglefunktioner

• Højeffekthåndtering: Each subwoofer handles 600 Watts RMS and 2400 Watts Peak (CEA-compliant).
• Durable Voice Coils: Features 2.5-inch black aluminum voice coils wound with 100% OFC copper wire for heat dissipation and reliability.
• Robust Motor Structure: Double 100-Oz stacked magnet and high BL motor gap for exceptional control and excursion.
• Premium Cone and Surround: Fiber-reinforced, ultra-stiff non-pressed paper cone with thick foam surround for responsive bass.
• Kurv i støbt aluminium: Provides rigid strength and optimal efficiency with a black sanded finish.
• Fleksibel ledningsføring: Dual chrome-plated binding posts accommodate various wire gauges.
• Enhanced Heat Management: Vented T-yoke and rubber magnet boot cover aid in heat dissipation.
• Alsidig kabinetkompatibilitet: Suitable for both sealed (1.0-1.5 cu. ft.) and ported (1.65-2.5 cu. ft.) enclosures.
• Bred frekvensrespons: 27Hz-1.5kHz for deep and clear bass.
• Høj følsomhed: 85dB sensitivity ensures efficient power conversion.

3. Opsætning og installation

Proper installation is crucial for the performance and longevity of your subwoofers. It is recommended that installation be performed by a qualified car audio professional.

3.1 Anbefalinger til indkapsling

• Sealed Enclosure Volume: 1.0 - 1.5 Cubic Feet per subwoofer.
• Vented/Ported Enclosure Volume: 1.65 - 2.5 Cubic Feet per subwoofer.

Ensure the enclosure is constructed from sturdy material and is airtight for sealed designs, or properly ported for vented designs, to prevent air leaks and optimize sound quality.

3.2 Mounting the Subwoofers

1. Forbered kabinettet: Ensure the cutout diameter in your enclosure matches the subwoofer's specifications (11.125 inches).
2. Placering: Carefully place the subwoofer into the cutout.
3. Sikker montering: Use appropriate screws to secure the subwoofer to the enclosure through the mounting holes. The custom Rockville mounting gasket helps ensure an airtight seal.

Billede: Forside view of the Rockville W12K6D2 V2 subwoofer, showing the cone and surround.

Billede: Vinklet view of the Rockville W12K6D2 V2 subwoofer, highlighting the cone texture and branding.

3.3 Ledningsforbindelser

The W12K6D2 V2 features dual 2-Ohm voice coils. Proper wiring is essential for matching the subwoofer's impedance to your amplifier's output. Consult your amplifier's manual for recommended impedance loads.

• Parallel Wiring (1 Ohm per subwoofer): Connecting voice coils in parallel reduces the total impedance. For a single dual 2-Ohm subwoofer, parallel wiring results in a 1-Ohm load.
• Series Wiring (4 Ohm per subwoofer): Connecting voice coils in series increases the total impedance. For a single dual 2-Ohm subwoofer, series wiring results in a 4-Ohm load.

Use high-quality speaker wire and ensure all connections are secure at the dual chrome-plated binding posts to prevent signal loss and short circuits.

Image: Close-up of the dual chrome-plated binding posts on the Rockville W12K6D2 V2 subwoofer for secure wiring connections.

Billede: Side view of the Rockville W12K6D2 V2 subwoofer, showing the robust cast aluminum basket and wiring terminals.

4. Betjeningsvejledning

1. Indbrudsperiode: Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofers at high volumes. This allows the suspension components to loosen and perform optimally.
2. AmpLifier-matchning: Sørg for din amplifier's power output matches the subwoofer's RMS power handling (600 Watts RMS per subwoofer). Overpowering or underpowering can lead to damage.
3. Forstærkningsindstilling: Indstil din amplifier's gain correctly to prevent clipping, which can cause distortion and damage to the subwoofers. Use a multimeter or oscilloscope for precise gain setting.
4. Crossover-indstillinger: Udnyt din amplifier's or head unit's low-pass filter (LPF) to send only low frequencies to the subwoofers. A typical LPF setting for subwoofers is between 80Hz and 120Hz.
5. Subsonisk filter: If available, use a subsonic filter to protect the subwoofers from playing frequencies below their resonant frequency, which can cause excessive excursion and damage.
6. Lytteniveauer: While these subwoofers are designed for high output, prolonged listening at extreme volumes can cause hearing damage and potentially shorten the lifespan of the product.

5. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre subwoofermembranen og surround-højttaleren. Undgå at bruge skrappe kemikalier eller slibende materialer.
• Inspektion: Undersøg regelmæssigt subwooferen for tegn på skader på membranen, surroundhøjttaleren eller ledningsforbindelserne.
• Miljøbeskyttelse: Protect the subwoofers from extreme temperatures, direct sunlight, and moisture.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

The Rockville W12K6D2 V2 subwoofers come with a Full Warranty. For warranty claims, technical support, or service inquiries, please contact Rockville customer support through their official webwebstedet eller den forhandler, hvorfra produktet blev købt. Hav venligst dit købsbevis og produktets modelnummer klar, når du kontakter support.