Notifier FCM-1REL Adresserbar ReleasinBrugermanual til g-kontrolmodulet

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of the Notifier FCM-1REL Addressable Releasing Control Module. The FCM-1REL is designed to integrate with compatible FlashScan fire alarm control panels (FACPs) to provide addressable control for releasing applications, such as fire suppression systems.

It is imperative that all personnel involved in the installation, programming, and maintenance of this device are fully trained and qualified in fire alarm system procedures and local codes.

2. Sikkerhedsoplysninger

WARNING: Risk of Electric Shock and System Malfunction.

• Installation and wiring must be performed by qualified personnel in accordance with all national and local electrical codes, regulations, and standards.
• Always disconnect power from the fire alarm control panel before installing, servicing, or removing the module.
• Ensure all connections are secure and correct to prevent system faults or improper operation.
• This module is part of a life safety system. Any modifications or improper installation can compromise the system's integrity and effectiveness.

3. Produktet er slutview

The Notifier FCM-1REL is an addressable control module specifically designed for releasing applications within a FlashScan intelligent fire alarm system. It allows the FACP to activate releasing devices, such as solenoids for sprinkler systems or pre-action valves, based on programmed alarm conditions.

Nøglefunktioner:

• Addressable communication with FlashScan compatible FACPs.
• Designed for releasing-applikationer.
• Monitors and controls external devices.

Komponenter:

The module consists of a circuit board housed within a durable plastic casing, designed for mounting in a standard electrical box. It features terminal blocks for wiring connections to the Signaling Line Circuit (SLC) and the releasing device circuit.

Figur 3.1: Forside view of the Notifier FCM-1REL module, showing terminal connections for auxiliary power and SLC, along with the mounting bracket.

4. Opsætning og installation

The FCM-1REL module is designed for mounting in a standard 4-inch square electrical box. Ensure adequate space for wiring and proper ventilation.

Installationstrin:

1. Strømafbrydelse: Before beginning installation, ensure all power to the fire alarm control panel and associated circuits is disconnected.
2. Montering: Mount the FCM-1REL module securely into a compatible electrical box using the provided screws.
3. Ledningsføring:
   • Connect the Signaling Line Circuit (SLC) wires to the designated terminals (e.g., T1, T2). Observe polarity.
   • Connect the releasing device circuit wires to the appropriate output terminals (e.g., T7, T8). Refer to the specific wiring diagram for your application.
   • Connect auxiliary power (if required) to the designated terminals (e.g., T10, T11).
   • Ensure all connections are tight and insulation is intact.
4. Adresseindstilling: Set the module's address using the rotary switches or dip switches (if present) according to the FACP's programming requirements.
5. Verifikation: After wiring, verify all connections are correct and secure before restoring power.

Figure 4.1: Notifier FCM-1REL module as supplied in its protective packaging, illustrating the rear view and terminal layout.

5. Betjeningsvejledning

The Notifier FCM-1REL module operates under the control of a compatible FlashScan fire alarm control panel (FACP). Its primary function is to receive commands from the FACP to activate connected releasing devices.

Normal drift:

In a normal state, the module continuously monitors its connected releasing circuit and communicates its status to the FACP. The FACP will indicate a normal condition for the module's address.

Releasing Operation:

Upon receiving a release command from the FACP (triggered by programmed alarm conditions), the FCM-1REL will activate its output circuit, energizing the connected releasing device (e.g., solenoid). This action initiates the release of the fire suppression agent.

Statusindikatorer:

The module may feature an LED indicator (check specific model documentation) that provides visual status:

• Normal: Flashing green (typical).
• Alarm/Aktiv: Solid red (typical).
• Besvær: Flashing amber (typical).

6. Vedligeholdelse

Regular maintenance is crucial for the reliable operation of the FCM-1REL module and the overall fire alarm system.

Anbefalet vedligeholdelse:

• Visuel inspektion: Periodically inspect the module for any signs of physical damage, loose connections, or environmental issues (e.g., moisture, excessive dust).
• Systemtest: Conduct regular system tests as required by local codes and manufacturer guidelines. This includes testing the functionality of the releasing circuit controlled by the FCM-1REL.
• Rensning: Rengør om nødvendigt forsigtigt modulets yderside med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Dokumentation: Keep accurate records of all inspections, tests, and maintenance performed.

Always refer to the fire alarm control panel's manual and relevant NFPA standards for comprehensive system maintenance procedures.

7. Fejlfinding

If the FCM-1REL module or the associated releasing circuit reports a trouble condition to the FACP, follow these general troubleshooting steps:

• Check FACP Display: Note the specific trouble message displayed on the fire alarm control panel. This often provides valuable diagnostic information.
• Undersøg ledninger: Power down the FACP and visually inspect all wiring connections to the FCM-1REL module and the connected releasing device. Look for loose wires, damaged insulation, or incorrect polarity.
• Bekræft strøm: Ensure that the module is receiving adequate power (if auxiliary power is used).
• Moduladresse: Confirm that the module's address is correctly set and matches the FACP programming.
• Consult FACP Manual: Refer to the fire alarm control panel's installation and programming manual for specific troubleshooting guides related to addressable modules and releasing-kredsløb.
• Professionel assistance: If the trouble persists after performing basic checks, contact a qualified fire alarm technician or Notifier technical support for further assistance.

8. Specifikationer

9. Garanti og support

Specific warranty information for the Notifier FCM-1REL module is not provided within this document. For details regarding warranty coverage, terms, and conditions, please refer to the original product packaging, purchase documentation, or contact Notifier directly.

For technical support, installation assistance, or to report issues, please contact your authorized Notifier distributor or a qualified fire alarm system professional.

You can also visit the official Notifier webwebsted for yderligere ressourcer og kontaktoplysninger.