Canarm Arden IPL707A01BN 1-Light Cord Pendant User Manual

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Canarm Arden IPL707A01BN 1-Light Cord Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference. This pendant light is designed for indoor use and features a brushed nickel finish with a watermark glass shade.

Billede 1.1: Hovedbillede view of the Canarm Arden 1-Light Cord Pendant.

2. Sikkerhedsoplysninger

ADVARSEL: To reduce the risk of fire, electric shock, or personal injury, follow these instructions:

• Always disconnect power at the main circuit breaker or fuse box before installation or servicing.
• Al ledningsføring skal være i overensstemmelse med nationale og lokale el-forskrifter. Hvis du er usikker på ledningsføringen, skal du kontakte en kvalificeret elektriker.
• Overskrid ikke det maksimale wattage specified for this fixture (100W Type A bulb).
• Ensure the fixture is securely mounted to a structural part of the building.
• Tilslut ikke denne armatur til et ujordet elektrisk system.
• Avoid touching the bulb directly with bare hands when replacing, as oils from your skin can shorten bulb life.
• Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.

3. Pakkens indhold

Verify that all components listed below are included in your package. If any parts are missing or damaged, contact Canarm customer support before proceeding with installation.

• Pendant Light Fixture (with cord and shade)
• Mounting Hardware (Canopy, Mounting Plate, Screws, Wire Nuts)
• Instruktionsmanual

Billede 3.1: View of the pendant light fixture and associated components.

4. Opsætning og installation

Before installation, ensure the power is turned off at the circuit breaker. This fixture requires assembly and ceiling mounting.

4.1 Nødvendigt værktøj (medfølger ikke)

• Phillips hovedskruetrækker
• Trådstrippere
• Elektrisk tape
• Stige

4.2 Installationstrin

1. Sluk for strømmen: Locate the circuit breaker controlling the light fixture and turn it off.
2. Forbered monteringsplade: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
3. Juster ledningslængde: The pendant cord length is adjustable from 10 to 58 inches. Determine the desired hanging height and adjust the cord accordingly. Secure any excess cord within the canopy or junction box.
4. Ledningsforbindelser:
   • Tilslut armaturets sorte ledning til husets sorte (fase) ledning.
   • Tilslut armaturets hvide ledning til husets hvide (neutrale) ledning.
   • Tilslut armaturets jordledning til husets jordledning (bar kobber eller grøn).
   • Fastgør alle forbindelser med ledningsmøtrikker og elektrisk tape.
5. Mount Canopy: Carefully push the canopy up to the ceiling, aligning the mounting holes with the screws on the mounting plate. Secure the canopy with the decorative nuts or screws.
6. Installer pære: Screw in one 100W Type A (E26 base) incandescent bulb into the socket. Do not exceed the maximum wattage.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

Billede 4.1: Eks.ample of the pendant light installed in a kitchen setting.

5. Betjeningsvejledning

The Canarm Arden pendant light operates via a standard wall switch (not included). Once installed and powered, simply use the wall switch to turn the light on or off. The fixture is designed for incandescent bulbs and features a touch control method, which typically refers to the type of switch it's compatible with, rather than an integrated touch sensor on the fixture itself.

5.1 Udskiftning af pære

1. Sluk for strømmen: Always turn off the power at the circuit breaker before replacing the bulb.
2. Lad afkøle: Lad den gamle pære køle helt af, før du rører ved den.
3. Fjern gammel pære: Unscrew the old bulb counter-clockwise.
4. Installer ny pære: Screw in a new 100W Type A (E26 base) incandescent bulb clockwise until snug. Do not overtighten.
5. Gendan strøm: Tænd for strømmen igen ved afbryderen.

Billede 5.1: Top-down view illustrating the bulb within the watermark glass shade.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your pendant light.

• Rensning: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Glasskærm: The watermark glass shade can be carefully removed for more thorough cleaning if necessary. Ensure it is completely dry before reattaching.
• Pærekontrol: Periodically check the bulb for signs of wear or dimming and replace as needed.

7. Fejlfinding

If you experience issues with your pendant light, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

This Canarm Arden IPL707A01BN 1-Light Cord Pendant is covered by a 1 års producentgaranti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or to inquire about replacement parts, please contact Canarm customer service. Keep your proof of purchase for warranty validation.

You can find contact information for Canarm by visiting their official webwebstedet eller forhandleren, hvor produktet blev købt.