1.Overview
This manual provides instructions for the Feit Electric A19 LED Light Bulbs, model A800/830/10KLED/10/RP. These bulbs are designed to offer energy-efficient lighting for various residential and commercial applications. They provide 800 lumens of 2700K Soft White light, equivalent to a standard 60-watt incandescent bulb, while consuming only 10 watts of power.
Nøglefunktioner:
- Energibesparelse: Replaces 60W incandescent bulbs with 10W LED, offering up to 83% energy savings.
- Langvarig: Designed for an average life of 11,000 hours (approximately 10 years), reducing the frequency of bulb replacements.
- Blødt hvidt lys: Produces a 2700K color temperature, ideal for creating a warm and inviting atmosphere.
- Øjeblikkelig tændt: Provides full brightness immediately upon activation, with no warm-up time.
- Kvalitet og sikkerhed: UL listed and FCC compliant, ensuring high standards for performance and safety.
Figure 1: Feit Electric A19 LED Light Bulbs (10-pack packaging).
2. Sikkerhedsoplysninger
Læs og forstå alle sikkerhedsinstruktioner, før du installerer eller bruger disse LED-pærer. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.
- Risiko for elektrisk stød: Sluk altid for strømmen til armaturet, før du inspicerer, monterer eller fjerner pæren.
- Ikke-dæmpbar: Disse pærer er IKKE designed for use with dimmers. Using them with a dimmer switch may cause flickering, damage to the bulb, or premature failure.
- Velegnet til Damp Steder: These bulbs are suitable for use in damp steder, men ikke til direkte eksponering for vand.
- Driftstemperatur: Do not use in totally enclosed luminaires unless the fixture is specifically designed for LED bulbs. Excessive heat can shorten bulb life.
- Kviksølvfri: These bulbs are 100% mercury-free.
- UL-listet: Dette produkt er UL-godkendt, hvilket indikerer overholdelse af sikkerhedsstandarder.
3. Opsætning og installation
Installation of the Feit Electric A19 LED Light Bulb is straightforward. Ensure the power is off before proceeding.
- Sluk for strømmen: Locate the light switch or circuit breaker controlling the fixture and turn off the power.
- Fjern gammel pære: Skru forsigtigt den eksisterende pære ud af armaturet. Lad den køle af, hvis den har været i brug for nylig.
- Installer ny pære: Screw the Feit Electric A19 LED bulb into the standard E26 medium base socket. Turn clockwise until it is finger-tight. Do not overtighten.
- Gendan strøm: Tænd for strømmen igen ved kontakten eller afbryderen.
- Prøve: Tænd lyskontakten for at sikre, at pæren fungerer korrekt.
Figure 2: A19 LED Bulb dimensions and base type (E26 Medium).
4. Betjening
The Feit Electric A19 LED Light Bulb operates like a standard light bulb. Once installed and power is restored, simply use the wall switch or fixture switch to turn the light on or off.
- Øjeblikkelig lysstyrke: The bulb will illuminate to full brightness immediately without any delay.
- Lysoutput: Provides 800 lumens of light, suitable for general room illumination.
- Farvetemperatur: Emits a 2700K Soft White light, creating a warm and comfortable ambiance.
- Ikke-dæmpbar: This bulb is not compatible with dimmer switches. Ensure it is used in a non-dimmable circuit.
Figure 3: Illustration of the bulb's light output in a room setting.
5. Vedligeholdelse
Feit Electric A19 LED Light Bulbs require minimal maintenance due to their long lifespan and durable design.
- Rensning: For at rengøre pæren skal du sørge for, at strømmen er slukket, og at pæren er kold. Tør forsigtigt af med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer.
- Ingen dele, der kan serviceres af brugeren: Pæren indeholder ingen dele, som brugeren kan servicere. Forsøg ikke at åbne eller reparere pæren.
- Bortskaffelse: Bortskaf gamle pærer i henhold til lokale regler for elektronisk affald.
6. Fejlfinding
If you encounter issues with your Feit Electric A19 LED Light Bulb, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pæren lyser ikke. | Ingen strøm til armaturet, løs forbindelse eller defekt pære. | Check if the light switch is on. Ensure the bulb is securely screwed into the socket. Check the circuit breaker. If issues persist, replace the bulb. |
| Pæren flimrer. | Inkompatibel lysdæmper eller ustabil strømforsyning. | Ensure the bulb is not connected to a dimmer switch, as it is non-dimmable. Check for loose wiring in the fixture. |
| Pæren er for svag. | Incorrect bulb for desired brightness. | Verify the bulb's lumen output (800 lumens for this model) meets your lighting needs. |
Figure 4: Feit Electric LED bulbs are designed for flicker-free operation in compatible fixtures.
7. Specifikationer
Detailed technical specifications for the Feit Electric A19 LED Light Bulb (Model: A800/830/10KLED/10/RP):
| Specifikation | Værdi |
|---|---|
| Modelnummer | A800/830/10KLED/10/RP |
| Pære form størrelse | A19 |
| Pære base | E26 medium |
| Lys type | LED |
| Wattage | 10 watt |
| Glødelignende ækvivalent | 60 watt |
| Lysstyrke | 800 lumen |
| Lys farve | 2700K blød hvid |
| Color Rendering Index (CRI) | 80 |
| Voltage | 110-120 volt |
| Gennemsnitligt liv | 11,000 timer / 10 år |
| Særlige funktioner | Non Dimmable, Mercury Free, Instant On, UL Listed, FCC Compliant |
| Indendørs/Udendørs brug | Indoor, Outdoor (Suitable for Damp Lokationer) |
| Materiale | Plast |
| Produktdimensioner | 2.35 cm B x 4.4 cm H |
Figure 5: Feit Electric A19 LED Light Bulb.
8. Garanti og support
Garantioplysninger:
This product is covered by the warranty as labelled on the product packaging. Please refer to the packaging for specific warranty terms and conditions.
Kundesupport:
For 24/7 customer support, frequently asked questions, and additional resources, please visit the Feit Electric help center:
Besøg Feit Electrics hjælpecenter
Figur 6: Oplysninger om Feit Electrics kundesupport.
