eufy BoostIQ RoboVac 11S (Slim) robotstøvsuger brugermanual

Indledning

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.

Vigtige sikkerhedsinstruktioner

Always follow basic precautions, including:

• Læs alle instruktioner før brug af apparatet.
• Do not operate the RoboVac in areas with open flames or flammable materials.
• Hold hår, løstsiddende tøj, fingre og alle dele af kroppen væk fra åbninger og bevægelige dele.
• Brug kun som beskrevet i denne manual.
• Må ikke bruges uden støvbeholder og/eller filtre på plads.
• Lad ikke børn lege med apparatet.
• Brug kun den strømadapter, der er leveret af producenten.
• Do not use the appliance to pick up large debris, liquids, or sharp objects.

Pakkens indhold

• 1 x eufy BoostIQ RoboVac 11S (Slim)
• 1 x Remote control (AAA batteries included)
• 1 x Charging Base & Power Adapter
• 1 x Rengøringsværktøj
• 2 x Side Brushes (additional pair)
• 1 x Filter Set (additional set)
• 1 x brugermanual
• 1 x Quick Start Guide
• 1 x garantioplysninger

Opsætning

1. Prepare the RoboVac

• Remove all protective films and stickers from the RoboVac and charging base.
• Attach the side brushes by pressing them onto the square posts until they click.

2. Install the Charging Base

Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.

Image: RoboVac automatically returning to its charging base.

3. Oprindelig opkrævning

Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.

Operating Your RoboVac

1. Tænd/sluk

Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.

2. Rengøringstilstande

The RoboVac offers several cleaning modes, selectable via the remote control:

• Auto rengøring: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
• Rengøring af pletter: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
• Kantrensning: The RoboVac cleans along walls and furniture edges.
• Rengøring af enkeltværelse: The RoboVac cleans a single room and then returns to its charging base.

Image: Remote control for selecting cleaning modes and scheduling.

3. BoostIQ Technology

The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.

Image: RoboVac activating BoostIQ for increased suction on carpet.

4. Planlægning

Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.

Opretholdelse

Regular maintenance ensures optimal performance of your RoboVac.

1. Tømning af støvbeholderen

Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.

Image: The dust bin removed from the RoboVac, showing collected debris.

2. Rengøring af filtrene

Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.

Image: Diagram illustrating the multi-layer filter system of the RoboVac.

3. Cleaning the Rolling Brush and Side Brushes

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.

4. Cleaning the Sensors and Charging Contacts

Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.

Fejlfinding

Specifikationer

Garanti og support

Your eufy BoostIQ RoboVac 11S (Slim) comes with a 12 måneders garanti. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support webwebsted.