1. Sikkerhedsoplysninger
Please read this manual thoroughly before installation and use. Improper installation or use may result in property damage or personal injury. If you have any questions, please contact Mount-It! customer support.
- Vægt kapacitet: Do not exceed the maximum weight capacity of the mount. Refer to the specifications section for details.
- Vægstruktur: Ensure the mounting surface can safely support the combined weight of the mount and the display. This mount is designed for single wood stud installation.
- Professionel installation: If you are unsure about the installation process, seek assistance from a qualified professional.
- Børn: Hold børn væk fra installationsområdet under opsætningen.
- Værktøjer: Brug passende værktøjer til installation.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter med installationen.
- Vægplademontering
- VESA-plade (aftagelig)
- svingarm
- Mounting Hardware (various screws, washers, spacers for TV and wall attachment)
- Wrench (for tilt adjustment)
Note: Additional tools such as a stud finder, drill, and level are required for installation and are not included.
3. Opsætning og installation
Follow these steps carefully to ensure a secure and proper installation of your Mount-It! MI-2042L TV Wall Mount.
3.1. VESA-kompatibilitetskontrol
Ensure your TV or monitor's VESA mounting pattern is compatible with this mount. This mount supports VESA patterns of 75x75mm, 100x100mm, 200x100mm, and 200x200mm.
Image: Diagram illustrating various VESA mounting patterns supported by the MI-2042L mount, including 75x75mm, 100x100mm, 200x100mm, and 200x200mm.
3.2. Vægmontering af beslaget
- Locate a Wood Stud: Use a stud finder to accurately locate the center of a wood stud in your desired mounting location. Mark the position.
- Bor pilothuller: Drill pilot holes into the center of the marked stud. Ensure the holes are the correct size for the lag bolts provided.
- Fastgør vægplade: Secure the wall plate assembly to the wall using the provided lag bolts and washers. Ensure it is level and tightly fastened.
3.3. Attaching the VESA Plate to Your Display
- Select Screws and Spacers: Choose the appropriate screws and spacers from the provided hardware kit that fit your TV's mounting holes.
- Fastgør VESA-plade: Secure the detachable VESA plate to the back of your TV or monitor. Ensure all screws are tightened evenly.
Billede: Nærbillede view of the detachable VESA head, highlighting the quick-release mechanism for easy installation and removal of the display.
3.4. Mounting the Display to the Wall Arm
- Hook the VESA Plate: Carefully lift your TV with the attached VESA plate and hook it onto the articulating arm.
- Sikr skærmen: Use the provided security screws or locking mechanism to firmly attach the VESA plate to the articulating arm, preventing accidental dislodgement.
Image: A television screen is shown mounted on the articulating wall mount, demonstrating the extended position of the arm.
3.5. Vejledning til videoinstallation
For en visuel vejledning til installationsprocessen, se venligst den officielle produktvideo nedenfor:
Video: An official Mount-It! video demonstrating the features and installation of the Full Motion TV Wall Mount, Model MI-2042L.
4. Betjeningsvejledning
The Mount-It! MI-2042L offers various adjustments for optimal viewing.
4.1. Hældningsjustering
The display can be tilted up to 15 degrees up or down to reduce glare and achieve the best viewing angle. Use the provided wrench to adjust the tilt mechanism on the VESA plate.
Image: A television screen is shown demonstrating 15 degrees of tilt adjustment and 360 degrees of rotation.
4.2. Drejejustering
The articulating arm allows for 180 degrees of swivel (left or right) from the wall plate and 360 degrees of swivel at the VESA plate connection, enabling flexible positioning of your display.
Image: The articulating arm is shown with arrows indicating 180 degrees of swivel at the wall connection and 360 degrees of swivel at the VESA plate connection, highlighting its three swivel points.
4.3. Rotation Adjustment
The VESA plate can rotate 360 degrees, allowing for landscape or portrait orientation of your display.
4.4. Extension Adjustment
The articulating arm extends the display from 1.75 inches (fully retracted) to 15 inches (fully extended) from the wall.
Billede: En side view of the mount showing the extension range from 1.75 inches (retracted) to 15 inches (extended) from the wall.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer vægbeslagets levetid og sikre drift.
- Rensning: Tør holderen af med en blød, tør klud for at fjerne støv. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Fastgørelseskontrol: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme og sikre. Spænd dem igen om nødvendigt.
- Bevægelsestjek: Test the articulating arm's movement occasionally to ensure it operates smoothly. If movement becomes stiff, a small amount of lubricant can be applied to the joints.
6. Fejlfinding
Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger.
- Beslaget er vanskeligt at flytte/justere: The joints may require lubrication. Apply a small amount of silicone-based lubricant to the moving parts. Ensure all bolts are not overtightened, which can restrict movement.
- TV does not fit the VESA plate: Double-check your TV's VESA pattern against the mount's specifications. Ensure you are using the correct screws and spacers for your TV model.
- Mount føles ustabil: Verify that the wall plate is securely fastened to a solid wood stud. Ensure all connections, especially between the VESA plate and the articulating arm, are tightened. Do not exceed the maximum weight capacity.
- Screws are too short for TV: Some TV models have deeper mounting holes. The kit includes various screw lengths and spacers. If the provided screws are still too short, you may need to acquire longer screws of the correct thread size.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | MI-2042L |
| Mærke | Monter den! |
| Materiale | Legeret stål |
| Farve | Sort |
| Monteringstype | Vægbeslag (enkelt stift) |
| Bevægelsestype | Articulating, Rotate, Swivel, Tilt |
| VESA-kompatibilitet | 75x75mm, 100x100mm, 200x100mm, 200x200mm |
| Skærmstørrelseskompatibilitet | 17-47 inches (LCD/LED Displays) |
| Forlængelse fra væg | 1.75 tommer (min.) til 15 tommer (maks.) |
| Maksimal hældningsvinkel | 15 Degrees (up/down) |
| Drejevinkel | 180 Degrees (at wall), 360 Degrees (at VESA plate) |
| Rotation | 360 grader |
| Varens vægt | 2.92 pund |
| Produktdimensioner | 32.5 x 2.5 x 10 tommer |
Image: Technical drawing showing the front and side views of the Mount-It! MI-2042L, including key dimensions such as wall plate width, arm length, and extension.
8. Garanti og support
Mount-It! products are designed for durability and performance. For warranty information, product registration, or technical support, please visit the official Mount-It! webwebsted eller kontakt deres kundeserviceafdeling.
Gem venligst din købsbevis i tilfælde af garantikrav.
