Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass AET200-1 Vintage Tub Faucet Body. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Keep this manual for future reference.
Sikkerhedsoplysninger
- Sluk altid for hovedvandforsyningen, inden du påbegynder installations- eller reparationsarbejde.
- Brug passende personlige værnemidler (PPE) såsom sikkerhedsbriller og handsker under installationen.
- Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
- Sørg for, at alle forbindelser er sikre og vandtætte for at forhindre lækager.
- Brug ikke skrappe kemikalier eller slibende rengøringsmidler på vandhanens overflade.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Kingston Brass AET200-1 Faucet Body
- Monteringshardware
- (Additional components may vary based on specific model variations)
Figur 1: Kingston Brass AET200-1 Vintage Tub Faucet Body. This image displays the polished chrome faucet body with its gooseneck spout and two handle connections.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Kingston messing |
| Modelnummer | AET200-1 |
| Materiale | Solid messing konstruktion |
| Slutte | Poleret krom |
| Monteringstype | Wall Mount 2-Hole Installation |
| Antal håndtag | 2 (Handles sold separately) |
| Tud rækkevidde | 4-1/2 tommer |
| Tudhøjde | 9-7/16 tommer |
| Max flowhastighed | 7.0 GPM / 26.5 LPM ved 80 PSI |
| Indløbsforbindelse | 3/4"-14 NPS |
| Patrontype | Drip-Free Ceramic Disc |
| Produktdimensioner | 9.44 x 8.75 x 4.5 tommer |
| Varens vægt | 4.02 pund |
Figur 2: Detailed technical drawing of the AET200-1 faucet body, showing key dimensions including spout reach (4-1/2"), spout height (9-7/16"), and wall mount spacing (3-3/8").
Installation
This faucet is designed for wall-mount, 2-hole installation. Professional installation is recommended.
- Forbered installationsområdet: Turn off the main water supply to the bathroom. Clear the area around the tub where the faucet will be installed.
- Verify Wall Openings: Ensure your wall has two pre-drilled holes spaced 3-3/8 inches apart, suitable for the faucet's inlet connections.
- Påfør gevindforsegling: Apply plumber's tape or thread sealant to the threaded inlet connections of the faucet body.
- Indsæt vandhanehus: Carefully insert the faucet body into the wall openings, ensuring the spout is oriented correctly.
- Sikker monteringshardware: From behind the wall (if accessible) or using the provided mounting hardware, secure the faucet body firmly to the wall. Tighten nuts evenly to prevent stress on the connections.
- Tilslut vandledninger: Connect the hot and cold water supply lines to the corresponding inlet connections on the faucet body. Ensure connections are tight but do not overtighten.
- Install Handles (Sold Separately): Attach the desired handles (not included with faucet body) according to their specific instructions.
- Test for lækager: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water supply and re-tighten connections as necessary.
- Skyl systemet: Allow water to run through the faucet for a few minutes to flush out any debris from the new installation.
Operation
The Kingston Brass AET200-1 faucet body is designed for use with two separate handles (hot and cold), which control water flow and temperature.
- Tænd/sluk: Rotate the hot and cold handles to turn the water flow on or off.
- Justering af temperatur: Mix hot and cold water by adjusting both handles until the desired water temperature is achieved.
- Justering af flow: The flow rate can be adjusted by how much the handles are opened.
Opretholdelse
Proper care and maintenance will ensure the longevity and appearance of your faucet.
- Rensning: Rengør vandhanen regelmæssigt med en blød klud og mild sæbe og vand. Skyl grundigt og tør med en blød klud for at undgå vandpletter.
- Undgå skrappe rengøringsmidler: Do not use abrasive cleaners, harsh chemicals, ammonia-based products, or scouring pads, as these can damage the polished chrome finish.
- Keramisk skivepatron: The faucet features a drip-free ceramic disc cartridge, which typically requires no maintenance. If a drip occurs, it may indicate a need for cartridge replacement.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Water leaks from spout when off. | Slidt keramisk skivepatron. | Replace the ceramic disc cartridge. |
| Water leaks from base of faucet. | Loose connections or damaged O-rings/gaskets. | Turn off water supply, check and tighten connections. Inspect and replace O-rings/gaskets if damaged. |
| Lav vandgennemstrømning. | Partially closed shut-off valves, clogged aerator (if applicable), or debris in water lines. | Ensure shut-off valves are fully open. Clean or replace aerator. Flush water lines. |
Garantioplysninger
This Kingston Brass product comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Kingston Brass website or contact their customer support. Proof of purchase may be required for warranty claims.
Kundesupport
For further assistance, technical support, or replacement parts, please contact Kingston Brass customer service:
- Webwebsted: www.kingstonbrass.com
- Telefon: Se Kingston Brass webhjemmeside for aktuelle kontaktnumre.
