1. Introduktion
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lithonia Lighting MNSL L24 2LL LED Strip Light. This 2-foot LED ceiling fixture is designed to deliver 2500 lumens of 4000K cool white light, suitable for various applications including commercial task lighting, restrooms, under cabinet lighting, storage closets, and garages. Its high-gloss steel body and diffuse polycarbonate lens ensure smooth, glare-free illumination.
Please read these instructions thoroughly before beginning installation or use. Keep this manual for future reference.
2. Sikkerhedsoplysninger
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse or circuit breaker before installing or servicing.
- Alle ledningsforbindelser skal være i overensstemmelse med lokale og nationale elektriske kodeksstandarder (NEC).
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- Sørg for, at armaturet er korrekt jordet.
- Do not install in areas with excessive moisture or where the fixture may be directly exposed to water, unless specifically rated for such conditions. This fixture is suitable for damp steder.
- Brug sikkerhedsbriller og handsker under installationen.
3. Produktet er slutview
The Lithonia Lighting MNSL L24 2LL LED Strip Light is a versatile and energy-efficient lighting solution. It features a compact design with integrated LED technology, eliminating the need for traditional fluorescent tubes.
Figure 3.1: Lithonia Lighting MNSL L24 2LL LED Strip Light. This image shows the complete 2-foot LED strip light fixture.
Nøglefunktioner:
- Energieffektiv LED: Provides 2500 lumens of 4000K cool white light with an 80+ CRI.
- Holdbar konstruktion: High-gloss, baked white enamel cold-rolled steel housing with a diffuse polycarbonate lens.
- Alsidig montering: Can be surface or suspension mounted on ceilings or walls, horizontally or vertically.
- Damp Placering bedømt: Velegnet til brug i damp miljøer.
- Non-Dimming: This specific model is designed for non-dimming applications.
Figure 3.2: Diagram illustrating key features of the MNSL LED Strip Light, including its two lamps, diffuse polycarbonate lens, and snap-lock tool-less channel cover for quick installation.
4. Installation
Before installation, ensure power is disconnected at the circuit breaker. This fixture can be surface or suspension mounted.
4.1. Nødvendige værktøjer og materialer:
- Skruetrækker (Phillips og/eller flad)
- Afisoleringstænger
- Bor med passende bor
- Blyant
- Målebånd
- Sikkerhedsbriller og handsker
- Wire nuts (if not included)
- Mounting hardware (screws, anchors, hanger chains or aircraft cable kit for suspension mounting - sold separately if not included)
4.2. Surface Mounting Steps:
- Forbered armaturet: Remove the snap-lock channel cover to access the wiring compartment.
- Markér monteringssteder: Hold the fixture in the desired mounting location and mark the positions for mounting screws. Ensure the marks align with a ceiling joist or use appropriate wall anchors.
- Bor pilothuller: Bor pilothuller på de markerede steder.
- Sikre armaturet: Feed the electrical supply wires through the appropriate knockout hole in the fixture. Secure the fixture to the mounting surface using screws.
- Ledningsforbindelser: Connect the electrical supply wires to the fixture's wires:
- Black (Live) to Black (Fixture)
- White (Neutral) to White (Fixture)
- Green or Bare Copper (Ground) to Green (Fixture)
- Close the Fixture: Carefully tuck all wires into the wiring compartment and reattach the snap-lock channel cover.
- Gendan strøm: Gendan strømmen til afbryderen og test armaturet.
4.3. Suspension Mounting Steps:
For suspension mounting, use appropriate hanger chains or an aircraft cable kit (sold separately). Follow the manufacturer's instructions for the suspension kit to securely hang the fixture. Wiring connections remain the same as for surface mounting.
Video 4.1: Lithonia Lighting MNSL Installation Guide. This video demonstrates the installation process for the Lithonia Lighting MNSL series, showing how to connect wiring and mount the fixture.
5. Betjening
The Lithonia Lighting MNSL L24 2LL LED Strip Light operates as a standard on/off fixture. Once properly installed and wired to a power source controlled by a wall switch, simply toggle the switch to turn the light on or off.
This model is non-dimmable. Attempting to use it with a dimmer switch may result in flickering, damage to the fixture, or voiding the warranty.
Figure 5.1: The LED strip light installed in a laundry room, demonstrating its bright and even illumination for utility spaces.
Figure 5.2: The LED strip light providing ample lighting in a garage setting, highlighting its suitability for task lighting in larger utility areas.
6. Vedligeholdelse
The Lithonia Lighting MNSL L24 2LL LED Strip Light requires minimal maintenance.
- Rensning: Sørg for, at strømmen er afbrudt, når armaturet rengøres. Brug en blød, tør eller let fugtet klud.amp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or lens.
- LED-levetid: The integrated LED lights are designed for long-lasting performance and do not require bulb replacement.
- Inspektion: Undersøg regelmæssigt armaturet for tegn på skader eller løse forbindelser. Hvis der findes problemer, skal strømmen afbrydes og en kvalificeret elektriker kontaktes.
7. Fejlfinding
If your LED strip light is not functioning correctly, refer to the following troubleshooting guide:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Ingen strøm til armaturet | Kontroller afbryderen eller sikringen. Sørg for, at vægkontakten er tændt. |
| Løs ledningsforbindelse | Disconnect power, then check and tighten all wiring connections. | |
| Lyse flimrer | Inkompatibel lysdæmperkontakt | This fixture is non-dimmable. Remove any dimmer switch and replace with a standard ON/OFF switch. |
| Løs ledningsforbindelse | Disconnect power, then check and tighten all wiring connections. | |
| Lyset er svagt eller inkonsekvent | Forkert voltage forsyning | Sørg for, at forsyningen voltage matches the fixture's requirements (120-277V). |
| Environmental factors (e.g., extreme temperature) | Ensure the fixture is used within its specified operating temperature range. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte kundesupport eller en kvalificeret elektriker.
8. Specifikationer
Figure 8.1: Product dimensions for the 2-foot MNSL LED Strip Light, showing length, width, and height measurements.
| Feature | Detalje |
|---|---|
| Modelnummer | MNSL L24 2LL MVOLT 40K 80CRI M6 |
| Lyskilde | Integreret LED |
| Længde | 24 tommer (2 fod) |
| Produktdimensioner | 24 cm L x 1.85 cm B x 1.74 cm H |
| Lumen output | 2500 lumen |
| Farvetemperatur | 4000 Kelvin (Cool White) |
| Color Rendering Index (CRI) | 80+ |
| Wattage | 20 watt |
| Voltage | 120-277V (Multi-volt) |
| Materiale | Steel housing, Polycarbonate lens |
| Slutte | Pulverlakeret hvid |
| Installationstype | Surface Mount, Suspension Mount |
| Indendørs/Udendørs brug | Indendørs (Damp Placering bedømt) |
| Kontrolmetode | Standard ON/OFF Switch (Non-dimmable) |
| Certificeringer | CSA Certified to US and Canadian safety standards |
| Varens vægt | 2.35 pund |
9. Garanti
This Lithonia Lighting MNSL L24 2LL LED Strip Light is covered by a 5 års begrænset producentgaranti. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the Lithonia Lighting official webwebsted.
10. Kundesupport
For technical assistance, warranty claims, or general inquiries, please contact Lithonia Lighting customer support:
- Webwebsted: Besøg Lithonia Lighting Store for produktinformation og supportressourcer.
- Telefon: Refer to the contact information provided on the product packaging or the official Lithonia Lighting webwebsted for direkte support.
Please have your model number (MNSL L24 2LL MVOLT 40K 80CRI M6) and date of purchase available when contacting support.
