Mitutoyo 513-401-10E Måleskive Testindikator Brugsanvisning

1. Introduktion

This manual provides essential instructions for the proper use, setup, and maintenance of your Mitutoyo 513-401-10E Dial Test Indicator. Designed for high-precision measurement, this instrument offers 1 µm accuracy and a 0.001 mm graduation for detailed dimensional inspection. Adhering to these guidelines will ensure optimal performance and longevity of the device.

2. Produktet er slutview og komponenter

The Mitutoyo 513-401-10E is a precision dial test indicator used for various measurement tasks, including alignment, runout, and flatness checks. Key components include the main body, a yellow dial face for clear readings, a contact point, and a clamp ring for mounting.

Figur 1: En side view of the Mitutoyo 513-401-10E Dial Test Indicator, showing the yellow dial face, the main body, and the contact point.

Nøglefunktioner:

Contact point effective length is printed on the dial face for quick reference.
Enhanced impact resistance and durability of internal gears and bezel.
Includes an inspection certificate with bidirectional evaluation, ensuring accuracy.
Crystal is designed with increased scratch-resistance for prolonged clarity.

Inkluderede komponenter:

Dial Test Indicator unit
Kontaktpunkt
Clamp ring
Stilk

Close-up of Mitutoyo 513-401-10E Dial Face

Figur 2: En detaljeret view of the yellow dial face of the Mitutoyo 513-401-10E, showing graduations from 0 to 70, the Mitutoyo logo, 'MADE IN JAPAN', '1µm' accuracy mark, and model number 'No. 513-401-10'.

3. Opsætning

Udpakning: Carefully remove the dial test indicator and all accessories from its packaging. Inspect for any visible damage.
Montering: Securely attach the indicator to a stable stand or fixture using the provided clamp ring and stem. Ensure the mounting is rigid to prevent measurement errors due to vibration or movement.
Contact Point Installation: Ensure the contact point is firmly screwed into the lever arm. The effective length of the contact point is crucial for accurate readings and is typically indicated on the dial face.
Placering: Position the indicator so that the contact point is perpendicular to the surface being measured. Apply slight pre-load to the contact point to ensure consistent contact and allow for bidirectional measurement.
Nulstilling: Rotate the outer bezel to align the '0' mark on the dial with the indicator needle. This establishes the reference point for your measurements.

4. Betjeningsvejledning

The Mitutoyo 513-401-10E is designed for precise comparative measurements. Follow these steps for accurate operation:

Establish Reference: Place the contact point on a known reference surface or datum point. Adjust the indicator's position until the needle is within the measurement range and then zero the dial by rotating the bezel.
Udfør måling: Move the indicator's contact point across the surface or feature to be measured. The needle will deflect, indicating variations from the zero reference point.
Read the Dial: The dial is graduated in 0.001 mm increments. Each major division (e.g., 10, 20) represents 0.01 mm. The total measurement range is 0.14 mm. Observe the needle's movement to determine the deviation.
Tovejsmåling: This indicator supports bidirectional measurement, meaning it can measure deviations in both directions from the reference point. The inspection certificate confirms this capability.
Gentagelighed: For critical measurements, perform multiple readings at the same point to ensure consistency and verify the instrument's repeatability.

Note: Always ensure the contact point is clean and free from debris before and during measurements to maintain accuracy.

5. Vedligeholdelse

Proper maintenance is crucial for preserving the accuracy and lifespan of your Mitutoyo Dial Test Indicator.

Rensning: After each use, gently wipe the indicator body and contact point with a clean, soft cloth. For stubborn dirt, a cloth lightly dampened with isopropyl alcohol can be used. Avoid harsh chemicals or abrasive materials.
Opbevaring: Store the indicator in its protective case when not in use. Keep it in a dry, dust-free environment, away from direct sunlight, extreme temperatures, and corrosive substances.
Håndtering: Handle the instrument with care. Avoid dropping or subjecting it to strong impacts, as this can affect its precision and internal mechanisms.
Inspektion: Periodically inspect the contact point for wear or damage. A worn contact point can lead to inaccurate readings.
Kalibrering: For professional applications, regular calibration by a qualified technician is recommended to ensure continued accuracy.

6. Fejlfinding

Problem	Mulig årsag	Løsning
Needle movement is sticky or erratic.	Dust or debris in the mechanism; insufficient lubrication; impact damage.	Clean the contact point and surrounding area. If the issue persists, professional servicing may be required. Avoid disassembling the unit.
Upræcise aflæsninger.	Improper mounting; worn contact point; incorrect zeroing; temperature fluctuations.	Ensure rigid mounting and correct contact point orientation. Check contact point for wear. Re-zero the dial. Allow the instrument to acclimate to ambient temperature.
Dial crystal is scratched.	Abrasion during use or cleaning.	While the crystal is scratch-resistant, extreme care is still advised. If visibility is significantly impaired, consider professional replacement.

7. Specifikationer

Feature	Detalje
Modelnummer	513-401-10E
Måleområde	0.14 mm
Nøjagtighed	1 µm (0.001 mm)
Graduering	0.001 mm
Produktdimensioner	3.7 x 1.57 x 1.06 tommer
Varens vægt	1.76 ounce
Fabrikant	Mitutoyo
Først tilgængelig	29. juni 2017

8. Garanti og support

Mitutoyo products are known for their quality and precision. For specific warranty information, please refer to the documentation included with your purchase or visit the official Mitutoyo website. In case of technical issues, repair, or calibration services, contact Mitutoyo customer support or an authorized service center. Always provide your model number (513-401-10E) when seeking support.

For yderligere hjælp kan du besøge Mitutoyo Store on Amazon.

	Mitutoyo Urindikator Brugermanual Omfattende brugermanual til Mitutoyo-måleurer, der beskriver sikkerhedsforanstaltninger, komponentidentifikation, driftsprocedurer, målemetoder, vedligeholdelse, specifikationer og tilgængeligt tilbehør.
	Mitutoyo Digimatic og måleurkatalog Udforsk det omfattende udvalg af Mitutoyo Digimatic-indikatorer, måleurer og testure. Dette katalog beskriver produktspecifikationer, funktioner og anvendelser for præcisionsmåleværktøjer.
	Mitutoyo 99MAA005M4 Indikerende mikrometer med drejeskive, hurtigstartguide Lynvejledning til Mitutoyo 99MAA005M4 indikationsmikrometer og drejemikrometer med nøgle, der giver vigtige oplysninger om betjening, sikkerhed og modeldetaljer.
	Mitutoyo ABS Digimatic-indikator ID-C: Funktioner, specifikationer og anvendelser Oplev Mitutoyo ABS Digimatic-indikatoren ID-C, en standard digital indikator med et stort 11 mm LCD-display, brugervenlige knapper og den avancerede ABS-sensor. Dette dokument beskriver dens vigtigste funktioner, omfattende specifikationer, forskellige anvendelsesprodukter og tilgængeligt tilbehør.
	Mitutoyo ABSOLUTE Digimatic indikator ID-C serie 543 - Tekniske specifikationer og funktioner Detaljeret information om Mitutoyo ABSOLUTE Digimatic-indikatoren ID-C-serien 543, inklusive funktioner, tekniske specifikationer, modeller og anvendelser til præcisionsmåling. Dækker standard-, beregnings-, signaludgangs-, maks./min.-holdings- og boremåleanvendelsestyper.
	Mitutoyo ABS Digimatic-indikator ID-C: Standard digital indikator Udforsk Mitutoyo ABS Digimatic Indicator ID-C, et standard digitalt måleinstrument med forbedret læsbarhed med et 11 mm LCD-display, brugervenlig betjening og alsidige funktioner som ABS/INC-måletilstande, dataoutput og tolerancevurdering. Denne brochure beskriver dens specifikationer, tilbehør og anvendelser i forskellige brancher.