Brugermanual til TRUE T-19F Reach-In-fryser

1. Introduktion

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your TRUE T-19F Reach-In Freezer. Please read this manual thoroughly before installing or operating the unit and retain it for future reference. The TRUE T-19F is a commercial-grade, single-door upright freezer designed for reliable frozen food storage.

Figur 1: Front view of the TRUE T-19F Reach-In Freezer, showcasing its stainless steel exterior and single door with a handle.

2. Sikkerhedsoplysninger

Always observe basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury.

Elektrisk sikkerhed: Ensure the freezer is connected to a properly grounded 115 Volt, dedicated electrical outlet. Do not use extension cords or adapter plugs.
Ventilation: Maintain adequate clearance around the unit for proper ventilation to prevent overheating. Refer to installation guidelines for specific distances.
Håndtering: The unit is heavy. Use appropriate lifting techniques and equipment during unpacking and placement to avoid injury.
Brandfarlige materialer: Do not store explosive substances or flammable materials inside or near the freezer.
Børn: Keep children away from the appliance. Ensure the door cannot be accidentally closed on a child.

3. Udpakning og installation

3.1 Udpakning

Carefully remove all packaging materials, including tape and protective film.
Inspect the freezer for any shipping damage. Report any damage immediately to the carrier and your supplier.
Remove any internal packing materials and accessories.

3.2 Placering

Place the freezer on a strong, level surface capable of supporting its weight when fully loaded.
Ensure adequate air circulation. Maintain a minimum of 3 inches (7.6 cm) clearance from walls or other equipment on the sides and rear, and 6 inches (15.2 cm) on top.
Avoid direct sunlight or proximity to heat-generating appliances (e.g., ovens, stoves).

3.3 Montering af hjul

The unit comes with free casters for mobility. Install them securely into the designated sockets at the bottom of the freezer. Ensure all casters are locked once the unit is in its final position to prevent accidental movement.

3.4 Elektrisk tilslutning

Connect the freezer to a dedicated 115 Volt, 60 Hz, single-phase AC power supply with a proper ground. Do not overload the circuit. Allow the unit to stand for at least 2 hours after moving before plugging it in to allow compressor oils to settle.

4. Betjening

4.1 Første opstart

After connecting to power, the freezer will begin to cool. Allow the unit to operate empty for several hours (e.g., 4-6 hours) to reach its set temperature before loading with products.

4.2 Temperaturkontrol

The freezer is equipped with a factory-set temperature control. Refer to the control panel for adjustments. Typically, commercial freezers operate at -10°F (-23°C) to 0°F (-18°C). Adjust the thermostat incrementally and allow time for the temperature to stabilize.

4.3 Fyldning af fryseren

Distribute products evenly on the three adjustable vinyl-coated wire shelves.
Do not block the air vents inside the freezer, as this can impede air circulation and cooling efficiency.
Avoid overloading shelves beyond their weight capacity.

4.4 Dørbetjening

The single door is self-closing to minimize temperature fluctuations and energy consumption. Ensure the door closes completely after each use. The door is also equipped with locks for security.

Indre view of TRUE T-19F freezer with shelves

Figur 2: Indre view of the TRUE T-19F freezer, showing the adjustable wire shelves and interior lighting.

5. Vedligeholdelse og rengøring

5.1 Regelmæssig rengøring

Indre: Clean the interior regularly with a mild soap and water solution. Rinse thoroughly and dry. Do not use abrasive cleaners or sharp objects.
Ydre: Wipe down the stainless steel exterior with a soft cloth and a non-abrasive cleaner designed for stainless steel.
Dørpakninger: Clean door gaskets frequently to ensure a proper seal. Inspect for cracks or tears and replace if damaged.

5.2 Rengøring af kondensatorspole

The condenser coil should be cleaned regularly (e.g., monthly or quarterly, depending on environment) to maintain optimal performance and energy efficiency. Disconnect power before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the coil fins. A dirty condenser coil can lead to reduced cooling capacity and increased energy consumption.

5.3 Optøning

This unit features an automatic defrost system. However, if excessive ice buildup occurs, manually defrost the unit by emptying it, disconnecting power, and allowing the ice to melt. Do not use sharp objects to remove ice.

6. Fejlfinding

Før du kontakter service,view følgende almindelige problemer og løsninger:

Problem	Mulig årsag	Løsning
Fryseren køler ikke	No power; thermostat set too high; dirty condenser coil; door not sealing.	Check power supply; adjust thermostat; clean condenser coil; inspect door gasket.
Overdreven støj	Unit not level; loose components; fan obstruction.	Level the unit; check for loose parts; ensure fan is clear.
Døren lukker ikke ordentligt	Obstructed gasket; unit not level; damaged hinge.	Clean gasket; level unit; contact service for hinge repair.

If the problem persists after attempting these solutions, contact a qualified service technician.

7. Specifikationer

Mærke: ÆGTE
Modelnavn: T-19F Reach in Freezer
Varenummer: 675-215-RT
Installationstype: Frit stående
Kapacitet: 19 Cu. Ft.
Voltage: 115 volt
Dørhængsler: Højre
Hylder: 3, adjustable vinyl coated wire
Farve: Sølv
Certificering: nå

8. Garanti og support

For warranty information, please refer to the separate warranty document provided with your purchase or visit the official TRUE website. For technical support, parts, or service inquiries, please contact TRUE customer service or an authorized service provider. Ensure you have your model number (T-19F) and serial number ready when contacting support.

You can find more information about TRUE products and support at the TRUE Store on Amazon.

	Installationsmanual til True T-seriens fryser/køleskab Omfattende installations- og betjeningsmanual til True T-seriens kommercielle frysere og køleskabe, der dækker opsætning, elektriske tilslutninger, nivellering, vedligeholdelse og fejlfinding.
	Installationsmanual til True T-seriens fryser og køleskab Installations-, betjenings- og vedligeholdelsesmanual til True T-seriens kommercielle frysere og køleskabe (modeller med svingdør og skydedør). Indeholder sikkerhedsforanstaltninger, elektriske instruktioner, fejlfinding og garantioplysninger.
	Servicemanual til True Refrigeration temperaturkontroller, termometer og timer Teknisk servicemanual til True Manufacturing kommercielt køleudstyr, med detaljerede oplysninger om betjenings- og justeringsprocedurer for afrimningsure (Grasslin- og Paragon-modeller), temperaturstyringer, termometre og timere.
	Installations- og betjeningsmanual til True T-23DF-HC kommercielt køleskab/fryser Omfattende installations-, betjenings-, vedligeholdelses- og sikkerhedsvejledning til True T-23DF-HC kommercielt køleskab/fryser med dobbeltkammer. Indeholder fejlfindings-, rengøringsvejledninger og garantioplysninger.
	True GDM/T-seriens videnskabelige installationsmanual Omfattende installationsmanual til True GDM/T-serien af videnskabelige køleskabe og frysere, der beskriver sikkerheds-, opsætnings-, betjenings- og vedligeholdelsesprocedurer for optimal ydeevne og levetid.
	True T-49G-HC~FGD01 Køleskab med svingdør og glasindgang - Funktioner og specifikationer Detaljeret information om True T-49G-HC~FGD01, et 49 cu ft køleskab med glaslåge og indbygget dæksel, kulbrintekølemiddel, energieffektivitet og holdbar konstruktion til fødevareindustrien.

TRUE T-19F