Indledning
Thank you for choosing the Aidapt 27W Floor Reading Lamp. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new lampLæs venligst denne manual grundigt inden brug, og gem den til senere brug.
Denne lamp is designed to provide optimal natural daylight (6500K) for various activities, including reading, writing, and creative hobbies. Its adjustable design allows for precise light positioning.
Sikkerhedsinstruktioner
- Sørg for at lamp er placeret på en stabil, plan overflade for at forhindre væltning.
- Udsæt ikke lamp for vand eller for høj fugtighed.
- Only use the specified bulb type (LED, 27W). Refer to the bulb compartment for specific warnings.
- Tag stikket ud af lamp fra stikkontakten før rengøring eller vedligeholdelse.
- Hold netledningen væk fra varmekilder og skarpe kanter.
- Forsøg ikke at modificere eller reparere lamp yourself. Contact qualified personnel for service.
Pakkens indhold
Tjek venligst pakken for følgende varer:
- Aidapt 27W Gulvlæsning Lamp (Hovedenhed)
- Strømledning med stik
- Brugervejledning (dette dokument)
Opsætning
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere transport eller opbevaring.
- Forsamling: Lamp typically comes in a few parts. Assemble the base, pole, and lamp head according to the diagrams. Ensure all connections are secure.
- Installation af pære: If the bulb is not pre-installed, carefully insert the 27W LED bulb into the socket. Ensure it is firmly seated.
- Placering: Placer lamp on a flat, stable surface near a power outlet. Ensure the power cord is not a tripping hazard.
Image 1: Fully assembled Aidapt 27W Floor Reading LampDette billede viser lamp's overall structure, including the stable base, the main pole, the flexible gooseneck, and the lamp head. The power cord is visible at the base.
Billede 2: Nærbillede view af lamp head's underside, showing the bulb compartment. This image highlights the three fluorescent tubes (or LED equivalents) and the power switch located on the lamp head. A warning label regarding bulb type is also visible.
Betjeningsvejledning
- Strømtilslutning: Tilslut lamp's power cord into a standard 120V AC electrical outlet.
- Tænd/sluk: Find tænd/sluk-knappen, typisk på l'enamp head or pole. Flip the switch to the 'ON' position to illuminate the lamp, and to 'OFF' to turn it off.
- Justering af Lamp: Lamp features a flexible gooseneck. Gently bend the gooseneck to position the lamp head and direct the light to your desired area. Avoid excessive force when adjusting.
Opretholdelse
- Rensning: Afbryd lamp fra strømforsyningen før rengøring. Tør l'et afamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Udskiftning af pære: Sørg for at lamp is unplugged and the bulb has cooled down before attempting to replace it. Follow the instructions for bulb installation in the 'Setup' section. Only use a 27W LED bulb.
- Opbevaring: Hvis du opbevarer lamp for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp tændes ikke. | Not plugged in; Power switch is off; Faulty bulb; No power at outlet. | Sørg for lamp is securely plugged in; Flip power switch to ON; Replace bulb; Test outlet with another device. |
| Lyse flimrer. | Loose bulb; Unstable power supply. | Ensure bulb is tightly screwed in; Try plugging into a different outlet. |
| Lamp er ustabil. | Not assembled correctly; Placed on uneven surface. | Check all assembly connections; Move lamp til en flad, stabil overflade. |
Specifikationer
- Model: VM654
- Mærke: Aidapt
- Magt: 27 watt
- Voltage: 120 volt
- Pære type: LED
- Lys temperatur: 6500K (Natural Daylight)
- Materiale: Metal
- Dimensioner (L x B x H): 175 x 34 x 160 cm (ca. 68.9 x 13.4 x 63 tommer)
- Varens vægt: 3.1 kilogram (ca. 6.83 lbs)
- Strømkilde: Elektrisk med ledning
Garanti og support
For warranty information or technical support, please contact Aidapt customer service. Details can typically be found on the product packaging or the official Aidapt webwebsted.
Webwebsted: www.aidapt.co.uk
