Defiant 270 Degree Replacement Motion Sensor User Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Defiant 270 Degree Replacement Motion Sensor. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The Defiant 270 Degree Replacement Motion Sensor in white, featuring its adjustable arm and the sensor head with a textured lens for wide-angle detection. Electrical wires are visible at the top connection point.

Produktegenskaber

270-graders dækning: Equipped with three Passive Infrared (PIR) sensors for extensive motion detection.
Universal Bulb Compatibility: Works with LED, CFL, halogen, and incandescent light bulbs.
Hi-Lo Feature: Provides accent lighting at 30% brightness from dusk to dawn, or dusk until the middle of the night with a timer setting.
Adjustable Extension Arm: Allows the sensor to extend below PAR 38 bulbs while maintaining 270-degree coverage, or can be retracted for a more compact appearance.
SMART Setting: Learns user behaviors and adjusts settings automatically for optimized performance.
ØKO-indstilling: Minimizes energy consumption.
Montering alsidighed: Designed for both eave and wall mounting.

Installation og opsætning

Sikkerhedsforanstaltninger

Always turn off power at the circuit breaker before beginning installation.
Kontakt en kvalificeret elektriker, hvis du er usikker på nogen del af installationsprocessen.
Sørg for, at alle ledningsforbindelser er sikre og overholder lokale el-forskrifter.

Monteringsvejledning

Vælg placering: Select a suitable location for mounting, either on an eave or a wall, ensuring optimal coverage for the desired area.
Forbered ledningsføring: Route the electrical wires from the fixture to the sensor's connection points. The sensor is designed for corded electric power.
Tilslut ledninger: Connect the sensor's wires to the fixture's wiring according to the provided wiring diagram (refer to the diagram usually included with the product packaging).
Secure Sensor: Securely attach the sensor to the mounting surface using appropriate hardware.
Juster arm: Adjust the extension arm as needed to position the sensor head for optimal detection, especially if using PAR 38 bulbs.

Betjeningsvejledning

Indledende opstart

After installation, restore power at the circuit breaker. The sensor may undergo a brief calibration period.

Indstilling af tilstande

SMART Setting: Activates an adaptive mode where the sensor learns and adjusts its sensitivity and timing based on detected patterns.
ØKO-indstilling: Engages an energy-saving mode, optimizing power consumption while maintaining essential functionality.
Hi-Lo Feature: Can be configured to provide low-level accent lighting during specific periods (dusk to dawn or timed). Refer to the product's physical controls or specific instructions for adjusting this feature.

Adjusting Sensitivity and Time

The sensor typically includes controls for adjusting motion sensitivity and the duration the light remains on after motion ceases. These controls are usually dials or switches located on the sensor body. Experiment with settings to find the optimal performance for your environment.

Opretholdelse

Rensning: Tør sensorlinsen af med jævne mellemrum med en blød klud.amp klud til at fjerne støv og snavs. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Inspektion: Regularly inspect the sensor and its wiring for any signs of damage or wear.
Miljøfaktorer: Ensure the sensor is not obstructed by growing foliage or new structures that could interfere with its detection range.

Fejlfinding

Problem	Mulig årsag	Løsning
Lyset tændes ikke ved bevægelse.	Ingen strøm til sensoren. Sensorfølsomhed for lav. Blokering i detektionsstien. Pæren er defekt.	Kontroller afbryderen og ledningsforbindelserne. Increase sensor sensitivity setting. Fjern eventuelle forhindringer. Udskift pæren.
Lyset forbliver tændt konstant.	Konstant bevægelse i detektionszonen. Sensor in test mode or faulty. Ledningsfejl.	Adjust sensor angle or sensitivity to exclude unwanted motion sources. Check sensor mode settings. If problem persists, sensor may be faulty. Kontroller ledningsforbindelserne.
Light turns on and off rapidly.	Interference from heat sources (e.g., vents, reflective surfaces). Sensor detecting minor environmental changes.	Flyt sensoren, eller juster dens vinkel for at undgå interferens. Reducer følsomheden.

Specifikationer

Modelnummer: RS-2701-WH
Dækning: 270 grader
Strømkilde: Elektrisk med ledning
Kompatible pæretyper: LED, CFL, Halogen, Glødepære
Monteringstype: Eave, Wall, or Pole Mount
Farve: Hvid
Varens vægt: 10.5 ounce
Pakkedimensioner: 7.32 x 3.98 x 3.46 tommer
UPC: 859655002828
Første tilgængelige dato: 25. januar 2018

Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Defiant webwebsted. Gem din købsbevis til garantikrav.

For further assistance, you may contact Defiant customer service. Contact details are typically available on the product packaging or the manufacturer's webwebsted.

	Brugs- og vedligeholdelsesvejledning til Defiant RS-2701 bevægelsessensor En omfattende guide til Defiant RS-2701 bevægelsessensoren, der beskriver installations-, betjenings-, justerings-, vedligeholdelses- og fejlfindingstrin for optimal ydeevne og sikkerhedsbelysning.
	Defiant DFI-5886-WH Fejlfindingsvejledning Fejlfindingsvejledning til Defiant 270° White Motion Activated Outdoor Integrated LED Triple Head Flood Light med justerbar farvetemperatur (model DFI-5886-WH).
	Ofte stillede spørgsmål: LED-bevægelsessikkerhedslys Omfattende ofte stillede spørgsmål om Defiant LED-bevægelsessikkerhedslys, herunder justering af følsomhed, pærekompatibilitet, montering, områdedækning, lysniveauindstillinger (HI/LO, Dusk to Dawn, Timer), manuel tilstand, krav til samledåser og ledningsføring.
	Defiant DF-5717-seriens udskiftningsbevægelsessensor: Brugs- og vedligeholdelsesvejledning Omfattende vejledning til installation, betjening og fejlfinding af Defiant DF-5717-seriens udskiftningsbevægelsessensor. Indeholder specifikationer, sikkerhedsoplysninger og garantioplysninger.
	Brugs- og vedligeholdelsesvejledning til Defiant DF-5716 udskiftningsbevægelsessensor Omfattende brugs- og vedligeholdelsesvejledning til Defiant DF-5716-bevægelsessensoren, inklusive installation, betjening, fejlfinding og sikkerhedsoplysninger.
	Defiant DFI-5982-WH Bevægelsessikkerhedslampe: Brugs- og vedligeholdelsesvejledning Denne vejledning indeholder omfattende instruktioner til Defiant DFI-5982-WH Motion Security Light, der dækker installation, betjening, vedligeholdelse og fejlfinding for at forbedre hjemmets sikkerhed.

Defiant RS-2701-WH

Defiant 270 Degree Replacement Motion Sensor