Amazon Basics udvidelig justerbar metalhængende opbevaringsorganisatorgarderobe med hylder brugermanual

1. Introduktion

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Amazon Basics Expandable Adjustable Metal Hanging Storage Organizer Rack Wardrobe with Shelves. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Sikkerhedsoplysninger

• Sikker placering: Ensure the storage rack is securely placed on a stable, level surface. Uneven surfaces can lead to instability and potential tipping.
• Vægtgrænser: Do not exceed the maximum weight capacity for shelves (80 lbs per shelf) and hanging rods (50 lbs when extended, 80 lbs when not extended). Overloading can cause structural damage or collapse.
• Forsamling: Follow all assembly instructions carefully. Incorrect assembly can compromise the unit's stability and safety.
• Børn og kæledyr: Keep children and pets away from the unit during assembly. Do not allow children to climb on or play with the storage rack.
• Anti-Tip Hardware: For added safety, especially in households with children or in areas prone to seismic activity, consider securing the unit to a wall using appropriate anti-tip hardware (not included).
• Korrosion: Avoid placing the unit in excessively damp environments to prevent rust, particularly at the base.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:

• Shelving Units (Poles and Wire Shelves)
• Justerbare hængestænger
• Plastic Clips (for shelf placement)
• Nivellerende fødder
• Plastic Shelving Liners
• Assembly Hardware (screws, etc., as needed for specific connections)

Hvis nogen dele mangler eller er beskadiget, bedes du kontakte kundesupport.

4. Opsætning og montering

Assembly typically requires one person and a mallet (rubber hammer) for best results. A Phillips head screwdriver may also be needed for certain connections.

1. Udpak og identificer dele: Lay out all components on a clean, flat surface. Familiarize yourself with each part, especially the plastic clips which have an 'UP' indication.
2. Monter nivelleringsfødder: Screw the leveling feet into the bottom of the four lower vertical poles. Ensure they are tightened securely.
3. Install Plastic Clips: Determine the desired height for your first shelf. Snap two halves of a plastic clip around each pole at the same height, ensuring the 'UP' arrow points upwards. Repeat for all four poles for each shelf. The shelves are adjustable in 1-inch increments.
4. Installer hylder: Slide a wire shelf down over the installed plastic clips. Gently tap the shelf corners with a rubber mallet to ensure it is firmly seated over the clips.
5. Assemble Towers: Continue installing clips and shelves to build the two shelving towers to your desired height. If extending the height, connect upper pole sections to lower pole sections using the provided connectors.
6. Install Hanging Rods: Attach the adjustable hanging rods between the two assembled shelving towers at your preferred height. Ensure the rods are securely fastened to the poles.
7. Endelige justeringer: Once fully assembled, adjust the leveling feet at the bottom of each pole to ensure the entire unit is stable and does not wobble.

For detailed diagrams and step-by-step visuals, please refer to the official user manual PDF: Brugervejledning (PDF)

5. Betjeningsvejledning

This storage rack is designed for versatile organization of clothing and other items.

• Justering af hyldehøjde: To adjust a shelf, remove all items from the shelf. Lift the shelf off the plastic clips. Remove the clips, reposition them at the desired height (in 1-inch increments), and then re-install the shelf.
• Adjusting Hanging Rod Width: The hanging rods are expandable. To adjust their width, loosen the locking mechanisms on the rods, extend or retract them to fit your space (between 57-80 inches), and then tighten the locking mechanisms securely.
• Indlæser varer: Distribute weight evenly across shelves and hanging rods. Place heavier items on lower shelves for increased stability.

6. Vedligeholdelse

Regular maintenance will help prolong the life of your storage rack.

• Rensning: Wipe the unit with a dry cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals that could damage the chrome finish.
• Inspektion: Periodically check all connections, including plastic clips and rod fasteners, to ensure they remain tight and secure.
• Rustforebyggelse: Keep the unit in a dry environment. If used in a humid area, ensure good ventilation and wipe away any moisture promptly to prevent rust formation.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the official Warranty document provided by Amazon Basics. A copy of the warranty can often be found on the product's Amazon listing page or by contacting Amazon Basics customer support.

For further assistance or to download the complete user manual with detailed diagrams, please visit the following link:

• Brugermanual (PDF): https://manuals.plus/m/27433ca497acd3a1a13aeeae4b9f8ee72000bac7fa9f26e80f87e950957b9fed
• Garanti (PDF): https://manuals.plus/m/d72aadf665b576afd6fc9209e16506d5616410490fbfd4b1c3e519fe4d797581