Brugervejledning til iRobot Roomba 671020 Robotstøvsuger

Indledning

The iRobot Roomba 671020 Robot Vacuum is designed to provide effortless cleaning for your home. Featuring Wi-Fi connectivity, it can be controlled via the iRobot HOME app or voice assistants like Alexa. Its patented 3-Stage Cleaning System effectively loosens, lifts, and suctions dirt, dust, and debris from various floor types, including carpets and hard floors.

Figure 1: The iRobot Roomba 671020 Robot Vacuum and its companion mobile application.

Hvad er der i æsken

Ensure all components are present before beginning setup:

• Ejervejledning
• 1 Home Base® Charging Station
• 1 nordamerikansk linjeledning
• Dokumentationspakke
• 1 Roomba® 671 Robot Vacuum with Wi-Fi® Connectivity

Opsætning

1. Place the Home Base® Charging Station

Select a location for the Home Base® that is on a level, hard surface and against a wall. Ensure there is at least 1.5 feet (0.5 meters) of clear space on each side of the Home Base® and 4 feet (1.2 meters) in front of it. This allows the Roomba to easily dock and undock.

2. Første opladning

Place your Roomba robot onto the Home Base® charging station. The robot will begin charging automatically. Allow the robot to charge for at least 3 hours before its first use to ensure a full battery.

3. Connect to Wi-Fi and the iRobot HOME App

Download the iRobot HOME app from your device's app store. Follow the in-app instructions to connect your Roomba to your home Wi-Fi network. The app provides access to advanced features, scheduling, and cleaning history.

Figure 2: Controlling your Roomba via the iRobot HOME app.

4. Integration af stemmeassistent

Once connected to the iRobot HOME app, you can link your Roomba to compatible voice assistants such as Amazon Alexa or Google Assistant. This allows for convenient voice commands to start, stop, or schedule cleaning cycles.

Betjening af din Roomba

Start af en ren cyklus

Du kan starte en rengøringscyklus på flere måder:

• Press the large CLEAN button on the robot.
• Use the iRobot HOME app to initiate cleaning, set schedules, or choose specific cleaning modes.
• Utilize voice commands through a connected voice assistant (e.g., "Alexa, ask Roomba to start cleaning.").

3-Stage Rengøringssystem

The Roomba 671020 employs a 3-Stage Cleaning System with Dual Multi-Surface brushes and an Edge-Sweeping brush. This system is designed to effectively loosen, lift, and suction dirt, dust, and debris from both carpets and hard floors.

Figure 3: The Roomba's underside demonstrating its ability to loosen, lift, and suction dirt.

Figure 4: The Multi-Surface Brushes are designed to grab various types of debris.

Adaptiv navigation

A suite of advanced sensors allows the Roomba 671020 to navigate efficiently around your home, moving under and around furniture, and along edges. Cliff Detect sensors prevent the robot from falling down stairs.

Figure 5: The Roomba's low profile allows it to clean effectively under furniture.

Figure 6: The Edge-Sweeping brush ensures thorough cleaning along walls and corners.

Dirt Detect™ Technology

Dirt Detect™ Sensors alert your robot to dirtier areas of your home, such as high-traffic spots. The robot will then clean these areas more thoroughly to ensure optimal cleanliness.

Figure 7: Dirt Detect™ Technology enables the Roomba to focus on heavily soiled areas.

Automatisk genopladning

The Roomba 671020 runs for up to 90 minutes before automatically returning to its Home Base® charging station to dock and recharge. This ensures it is always ready for its next cleaning cycle.

Opretholdelse

Regular maintenance is crucial for the optimal performance and longevity of your Roomba robot vacuum. Always turn off the robot and disconnect it from the Home Base before performing any maintenance.

Tømning af snavs

The dirt bin should be emptied after each cleaning cycle or when the 'Bin Full' indicator illuminates. To empty, press the bin release tab and pull the bin out. Open the bin door and shake out debris. Clean the filter as needed.

Cleaning the Brushes and Wheels

Periodically inspect and clean the Multi-Surface brushes, Edge-Sweeping brush, and front caster wheel. Hair and debris can accumulate around these components, affecting cleaning performance. Use the cleaning tool provided with your Roomba to remove tangled hair.

Rengøring af sensorer

Wipe the charging contacts on the robot and Home Base, as well as the cliff sensors and dirt detect sensors, with a clean, dry cloth. Keeping these sensors clean ensures proper navigation and docking.

Fejlfinding

If your Roomba encounters an issue, consult the iRobot HOME app for specific error messages and troubleshooting steps. Here are some common issues and general solutions:

• Robotten oplader ikke: Sørg for, at Home Base er tilsluttet en stikkontakt, og at opladningskontakterne på både robotten og Home Base er rene.
• Robot sidder ofte fast: Clear obstacles from the cleaning area. Ensure cords and loose items are picked up. The robot may also get stuck if its sensors are dirty.
• Dårlig rengøringsevne: Empty the dirt bin, clean the brushes, and replace the filter if necessary. Ensure the brushes are free of tangled hair and debris.
• Robotten opretter ikke forbindelse til Wi-Fi: Verify your Wi-Fi network is active and the password is correct. Try restarting your router and the Roomba.

For more detailed troubleshooting, refer to the full Owner's Guide or contact iRobot Customer Support.

Specifikationer

Garanti og support

For detailed warranty information, please refer to the official warranty document provided by iRobot. You can access the Warranty PDF her.

For further assistance, technical support, or to purchase replacement parts, please visit the official iRobot webwebsted eller kontakt deres kundeserviceafdeling.

An Owner's Guide is also available for download her.