Indledning
This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.
Vigtige sikkerhedsoplysninger
- Do not store the emergency override keys inside the safe. Keep them in a secure, separate location.
- Sørg for, at pengeskabet er monteret sikkert for at forhindre uautoriseret fjernelse.
- This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
- Keep the keypad dry and clean. Avoid using abrasive cleaners.
Pakkens indhold
- Amazon Basics DS-110SAM Security Safe
- Nødtilsidesættelsestaster (2)
- Monteringsudstyr (skruer, ankre)
- Instruktionsmanual (dette dokument)
Opsætning
1. Batteriinstallation
- Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
- Find batterirummet på indersiden af døren til pengeskabet.
- Isæt 4 nye AA-batterier, og sørg for at polerne vender korrekt (+/-).
- Luk batterirummets dæksel.
2. Indstilling af din personlige kode
Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.
- With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
- On the keypad, enter your new personal code (3 to 8 digits).
- Tryk på og holde the '#' button to confirm. You will hear a confirmation beep.
- Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.
3. Montering af pengeskabet
For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.
Image: Back of the safe with pre-drilled mounting holes.
- Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
- Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
- Drill pilot holes into the surface.
- Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.
Image: The safe positioned within a desk drawer, demonstrating its intended use.
Betjening af pengeskabet
Billede: Forside view of the safe, highlighting the electronic keypad and locking mechanism.
1. Opening with Electronic Keypad
- Enter your personal code (3 to 8 digits).
- Press the '#' button. The green light will illuminate.
- Drej knappen med uret inden for 5 sekunder for at åbne pengeskabslågen.
2. Opening with Emergency Override Key
Use this method if you forget your code or if the batteries are depleted.
Image: Close-up of the keypad with an emergency key in use.
- Gently remove the keypad cover to reveal the keyhole.
- Sæt en af nødnøglerne i nøglehullet.
- Turn the key clockwise and simultaneously turn the knob to open the safe door.
- Once open, you can replace the batteries if needed or reset your code.
3. Lukning og låsning af pengeskabet
- Luk pengeskabsdøren.
- Turn the knob counter-clockwise to engage the locking bolts. The safe is now locked.
Image: Detail of the live-door bolts, which provide security when the safe is locked.
Opretholdelse
1. Udskiftning af batteri
When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.
2. Rensning
Tør pengeskabets yderside af med en blød, tør kludamp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.
Fejlfinding
- Pengeskabet åbner ikke med kode:
- Sørg for, at batterierne er friske og korrekt installeret.
- Verify you are entering the correct code and pressing '#' firmly.
- Try using the emergency override key.
- Tastaturet reagerer ikke:
- Udskift batterierne.
- Sørg for, at der ikke er snavs, der blokerer knapperne.
- Døren lukker ikke ordentligt:
- Check for any obstructions inside the safe or around the door frame.
- Ensure the locking bolts are fully retracted before attempting to close.
Specifikationer
| Mærke | Grundlæggende om Amazon |
| Modelnummer | DS-110SAM |
| Produktmål (udvendige) | 11.8"W x 8.6"D x 4.4"H (30cm x 21.9cm x 11.2cm) |
| Indvendige dimensioner | 11.7"W x 8.5"D x 1.7"H (29.7cm x 21.6cm x 4.3cm) |
| Kapacitet | 0.1 kubikfod (2.7 liter) |
| Låsetype | Electronic Keypad with Emergency Key |
| Materiale | Legeret stål |
| Farve | Sort |
| Varens vægt | 11.27 pund (5.12 kg) |
| Batterier påkrævet | 4 x AA (medfølger ikke) |
Garantioplysninger
For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics webwebsted. Garantivilkår og -betingelser kan variere.
Kundesupport
If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official webwebstedet eller de kontaktoplysninger, der er angivet med dit køb.
