deleyCON MK2639 Digital ugentlig timer til kontrolpaneler - Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, setup, and operation of your deleyCON MK2639 Digital Weekly Timer. This device is designed for precise control of electrical appliances by switching them ON and OFF according to programmed schedules. It is intended for installation in electrical control panels.

2. Sikkerhedsoplysninger

ADVARSEL: Fare for elektrisk stød. Installation og vedligeholdelse bør kun udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.

• Always disconnect power before installing or servicing the timer.
• Ensure the timer is installed in a dry, indoor environment.
• Overskrid ikke den maksimale belastningskapacitet på 3600 W (16 A).
• Kontroller, at alle forbindelser er sikre og korrekte, før strømmen genoprettes.

3. Produktfunktioner

• Digital timer with clear LCD display.
• Designed for installation in electrical control panels.
• 10 programmable ON/OFF switching programs.
• Minimum switching interval of 1 minute.
• 16 different weekday combination options for flexible scheduling.
• Selectable 12 or 24-hour display format.
• Manual ON/OFF override function.
• Adjustable Daylight Saving Time (DST) feature.
• IP20 protection class, suitable for indoor use.
• Integrated NiMH 1.2V backup battery providing over 100 hours of power reserve for settings retention during power outages.

4. Pakkens indhold

• 1 x deleyCON MK2639 Digital Weekly Timer with LCD Display
• 1 x brugermanual

5. Produktet er slutview

Figur 1: Forside View of the Digital Timer
This image displays the front of the deleyCON MK2639 timer, featuring the LCD screen, and the control buttons labeled R, W+, H+, M+, C+, MANUAL, and RES/RCL. The ON/OFF indicator is also visible.

Figure 2: Side and Back View
This image shows the side and back of the timer, highlighting the model number (MK2639 / TGE-12), input voltage (230V~50Hz), maximum load (16(2)A, 3600W), and the DIN rail mounting clip.

Kontrolknapper:

• R (Nulstil): Resets the timer to factory defaults.
• W+ (Week+): Adjusts the day of the week or selects weekday combinations during programming.
• H+ (Hour+): Justerer timen.
• M+ (Minute+): Justerer minuttet.
• C+ (Clock+): Used in conjunction with W+, H+, M+ to set the current time.
• MANUEL: Toggles between ON, OFF, and AUTO modes.
• RES/RCL (Nulstil/Genkald): Used to clear or recall program settings.

6. Installation

The deleyCON MK2639 Digital Weekly Timer is designed for DIN rail mounting within an electrical control panel.

6.1 Montering på DIN-skinne

1. Ensure all power to the control panel is disconnected at the main breaker.
2. Locate an available space on the DIN rail.
3. Attach the timer to the DIN rail by hooking the top edge onto the rail and then pressing the bottom edge until the clip engages.

Figure 3: DIN Rail Mounting Mechanism
This image illustrates the removable clear front cover and the spring-loaded clip at the bottom of the timer, which secures it to a DIN rail.

Figure 4: Timer Installed on DIN Rail
The timer is shown securely mounted on a standard DIN rail, ready for wiring connections.

6.2 Ledningsforbindelser

Refer to the wiring diagram below for correct electrical connections. All wiring must comply with local electrical codes.

Figur 5: Ledningsdiagram
This diagram shows the terminal layout: L (Live Input), N (Neutral Input), and output terminals 1, 2, 3, 4, 5 for connecting the load. Terminals 1 and 2 are typically for the normally open contact, while 3, 4, 5 represent common, normally closed, and normally open contacts respectively for the internal relay.

• Connect the Live (L) wire from your power supply to the terminal marked 'L'.
• Connect the Neutral (N) wire from your power supply to the terminal marked 'N'.
• For the load connection, use terminals 3, 4, and 5. Terminal 3 is the common contact. Terminal 4 is normally closed (NC) and Terminal 5 is normally open (NO). Connect your appliance's live wire to Terminal 5 (for switching ON) and the neutral to the neutral supply.
• Sørg for, at alle terminalskruer er spændt forsvarligt.

7. Indledende opsætning

7.1 Nulstilling af timeren

Ved første brug eller efter længere tids strømafbrydelsetage, it is recommended to reset the timer. Press the R button with a pointed object (e.g., a pen tip) to clear all settings and reset the display.

7.2 Indstilling af aktuel tid og dag

1. Tryk og hold på C+ knap.
2. Mens du holder C+, tryk W+ for at indstille den aktuelle ugedag (MA, TI, ON, TH, FR, LØ, SØ).
3. Mens du holder C+, tryk H+ for at indstille den aktuelle time.
4. Mens du holder C+, tryk M+ for at indstille det aktuelle minut.
5. Frigøre C+. The time is now set.

7.3 12/24 timers format

To switch between 12-hour and 24-hour display, press the C+ og H+ knapper samtidigt.

7.4 Sommertid (DST)

For at aktivere eller deaktivere sommertid skal du trykke på C+ og M+ buttons simultaneously. The display will show 'SUMMER' or 'WINTER' accordingly.

8. Brugsanvisning (programmering)

The timer allows for up to 10 ON/OFF programs with various weekday combinations.

8.1 Indstilling af TIL/FRA-programmer

1. Tryk på PROG button (often labeled as 'P' or 'PROG' on similar models, or use RES/RCL if 'PROG' is not present, referring to Figure 1). The display will show '1 ON'.
2. Trykke W+ to select the desired day(s) of the week for this program. There are 16 different combinations (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; MO,WE,FR; TU,TH,SA; MO-WE; TH-SA; MO-FR,SA; MO-SU).
3. Trykke H+ for at indstille ON-timen.
4. Trykke M+ for at indstille ON-minuttet.
5. Trykke PROG igen. Displayet vil vise '1 OFF'.
6. Repeat steps 2-4 to set the OFF time for program 1.
7. Fortsæt med at trykke PROG for at gennemgå programmerne 2 TIL, 2 FRA, op til 10 TIL, 10 FRA.
8. Når du har indstillet alle de ønskede programmer, skal du trykke på C+ knappen for at vende tilbage til visning af det aktuelle klokkeslæt.

8.2 Manuel tilsidesættelse

Tryk på MANUEL knap til at gennemgå driftstilstandene:

• BIL: Timeren fungerer i henhold til de programmerede tidsplaner.
• PÅ: The output is continuously ON, overriding all programs.
• OFF: The output is continuously OFF, overriding all programs.

To return to automatic operation, press MANUEL until 'AUTO' is displayed.

9. Vedligeholdelse

9.1 Rengøring

To clean the timer, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.

9.2 Backup batteri

The timer includes an internal NiMH 1.2V rechargeable battery to maintain time and program settings during power outages. This battery is designed for long-term use and typically does not require replacement. If the display is blank or settings are lost frequently after power interruptions, the battery may need professional servicing.

10. Fejlfinding

• Displayet er tomt:
  Check power supply to the timer. Ensure the main power is ON. If power is present and the display remains blank, the internal backup battery might be fully discharged or faulty. Allow the timer to charge for several hours with power connected. If the issue persists, contact support.
• Programmerne kører ikke:
  Ensure the timer is in 'AUTO' mode (check the MANUAL button setting). Verify that the current time and day are set correctly. Double-check your program settings for accuracy (ON/OFF times and selected weekdays).
• Tidspunktet er forkert:
  Reset the timer using the 'R' button and then re-set the current time and day. Check if Daylight Saving Time (DST) is incorrectly activated/deactivated.
• Appliance does not switch ON/OFF:
  Verify the wiring connections are correct and secure (refer to Section 6.2). Ensure the appliance itself is functional and properly connected. Check the timer's operating mode (AUTO, ON, OFF).

11. Specifikationer

12. Support og garanti

For technical support or inquiries, please contact deleyCON customer service. Information regarding specific warranty terms may be available on the product packaging or the official deleyCON webwebsted.