1. Vigtige sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. Disconnect power at the main circuit breaker panel or main fuse box before installation or servicing. Failure to do so may result in serious injury or property damage.
Always ensure wiring is safely disconnected from power before beginning any work on the fixture. Use a non-contact voltagtesteren for at bekræfte, at strømmen er slukket.
Consult a qualified electrician if you have any doubts or questions regarding the installation process or if your home's wiring does not match standard black and white wires.
Please check your local laws and electrical codes before installing this product.
2. Produktet er slutview
The Kichler Shailene 18-inch 3-Light Square Semi-Flush Ceiling Light (Model 43693NI) is designed to provide ambient lighting. It features a brushed nickel finish with a satin etched white diffuser and a white microfiber shade.
Figure 2.1: Kichler Shailene Semi-Flush Ceiling Light, Model 43693NI.
Figure 2.2: Product dimensions showing 18 inches width and 11 inches height.
3. Hvad er der i æsken
Carefully unpack all components and check against the list below. Ensure all parts are present before discarding packaging materials.
- (1) Monteringsrem
- Rem monteringsskruer
- Monteringsskruer
- Låseskive
- Lock up Knobs
- Trådmøtrikker
- Trim
- finial
- Bead Pipe
- (1) Shade(s)
- Bulb(s) (ikke inkluderet)
4. Nødvendigt værktøj (medfølger ikke)
The following tools are recommended for safe and efficient installation:
- Trinstige
- Phillips hovedskruetrækker
- Fladhovedskruetrækker
- Wire Strippers/Pliers
- Non-Contact Voltage tester
- Safety Glasses (recommended)
5. Installationsvejledning
Follow these steps carefully to install your Kichler Shailene semi-flush ceiling light. It is recommended to have an additional person for assistance during installation, especially when lifting the fixture.
5.1. Forbered til installation
- Afbryd strømmen: Locate the main circuit breaker panel or fuse box and turn off the power to the circuit where you will be installing the light fixture.
- Bekræft at strømmen er slukket: Brug en berøringsfri voltage tester to ensure that the wiring at the ceiling junction box is safely disconnected from power.
- Fjern eksisterende armatur: Carefully remove any existing light fixture from the ceiling. Disconnect all wires and remove the old mounting bracket.
- Review Instruktioner: Keep the printed instructions provided with your fixture close by for specific details, as each fixture may have unique instructions.
5.2. Monter armaturet
- Fastgør monteringsbeslag: Secure the new mounting bracket to the junction box on your ceiling using the provided mounting screws. Ensure it is firmly attached.
- Forbered ledninger: If necessary, cut excess wiring from the fixture, leaving a minimum of 6 inches from the top of the canopy for connections. Strip approximately 3/4 inch of insulation from the ends of the wires.
- Tilslut jordledning: Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut. Secure the ground wire to the mounting bracket's ground screw.
- Connect Supply Wires:
- Tilslut den hvide ledning fra armaturet til den hvide (neutrale) ledning fra samledåsen ved hjælp af en trådmøtrik.
- Tilslut den sorte ledning fra armaturet til den sorte (varme) ledning fra samledåsen ved hjælp af en trådmøtrik.
- Tuck-ledninger: Carefully tuck all connected wires into the junction box, ensuring they are not pinched.
- Sikker baldakin: Raise the fixture's canopy to the ceiling and secure it to the mounting bracket using the provided lock up knobs or finial.
5.3. Slutsamling
- Installer pærer: Carefully screw the appropriate light bulbs (E26 Medium base, up to 75W equivalent) into the sockets.
- Fastgør skærm: Secure the satin etched white diffuser and white microfiber shade to the fixture according to the specific instructions for your model.
5.4. Gendan strømmen
- Tænd for strømmen: Return to the main circuit breaker panel or fuse box and restore power to the circuit.
- Testopstilling: Turn on the wall switch to test your new Kichler Shailene semi-flush ceiling light.
5.5. Installationsvideoguide
For a visual guide on installing Kichler semi-flush and flush mount fixtures, please refer to the video below. Note that specific steps may vary slightly depending on your fixture model.
Video: How to Install Kichler Semi Flush and Flush Mounts at Home. This video provides general installation guidelines; always refer to your specific product's printed instructions.
6. Betjening
The Kichler Shailene semi-flush ceiling light operates via a standard wall switch. Ensure the switch is in the "ON" position for the light to function. If using a dimmer switch, ensure it is compatible with the type of bulbs installed.
7. Vedligeholdelse
Regular cleaning will help maintain the appearance and performance of your fixture.
- Før rengøring: Always ensure the electric current is turned off at the circuit breaker before cleaning any part of the fixture.
- Metalkomponenter: Clean metal components with a soft cloth moistened with a mild liquid soap solution. Wipe clean and buff with a very soft dry cloth to prevent water spots or streaks.
- Shade and Diffuser: For the satin etched white diffuser and white microfiber shade, use a dry, soft cloth to gently wipe away dust. For more stubborn marks, a slightly damp cloth with plain water may be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
- Udskiftning af pære: When replacing bulbs, ensure the power is off. Allow bulbs to cool completely before handling. Use E26 Medium base bulbs, up to 75W equivalent.
8. Fejlfinding
If your Kichler Shailene light fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. | Kontroller afbryderen og vægkontakten. Sørg for, at strømmen er genoprettet. |
| Lyset tændes ikke. | Løse eller forkerte ledningsforbindelser. | Turn off power at the breaker. Recheck all wire connections (black to black, white to white, ground to ground). Ensure wire nuts are secure. |
| Lyset tændes ikke. | Defekt pære. | Replace the bulb(s) with new, working ones of the correct type and wattage. |
| Lyse flimrer. | Løs pære eller ledninger. | Ensure bulbs are screwed in tightly. Check wire connections at the junction box (with power off). |
| Lyset er svagt. | Forkert pære wattage eller type. | Ensure bulbs meet the specified wattage (up to 75W equivalent) and are fully functional. |
If these steps do not resolve the issue, contact a qualified electrician or Kichler customer support for further assistance.
9. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Kichler |
| Modelnavn | Shailene |
| Modelnummer | 43693NI |
| Produktdimensioner | 18 cm L x 18 cm B x 11 cm H |
| Antal lyskilder | 3 |
| Pære base | E26 medium |
| Max Wattage (pr. pære) | 75 watts equivalent |
| Voltage | 120 volt |
| Armaturmateriale | Legeret stål |
| Skærmmateriale | Glass, Microfiber |
| Finish Type | Børstet nikkel |
| Skygge farve | Hvid |
| Installationstype | Semi Flush Mount |
| Indendørs/Udendørs brug | Indendørs |
| Varens vægt | 6.8 pund |
10. Garanti og support
This Kichler Shailene fixture comes with a 1 års begrænset garantiDenne garanti dækker materiale- og fabrikationsfejl under normal brug og service.
For warranty claims, technical support, or additional information, please contact Kichler customer service. Refer to the official Kichler webwebstedet eller din købsdokumentation for at få de seneste kontaktoplysninger.
Kichler Webwebsted: www.kichler.com
