Audio System CO-600.5 High-Performance 5-Channel Class A/B Amplivligere brugervejledning

1. Introduktion

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Audio System CO-600.5 High-Performance 5-Channel Class A/B Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before using the product and retain it for future reference.

2. Sikkerhedsoplysninger

General Product Safety according to EU Regulation 2023/2028:

• Observe the manufacturer's instructions and operating instructions for switching off the power supply to the vehicle and in the retrofit products.
• The supply line to the retrofit product must not be longer than 30cm from the operating battery.
• Fasten retrofit devices and accessories properly.
• It is recommended that the retrofit devices/accessories be installed by a specialist workshop. Otherwise, product or vehicle damage and fire can occur.

Always disconnect the vehicle's battery before performing any installation or maintenance work to prevent electrical shock or damage.

3. Produktet er slutview

The Audio System CO-600.5 is a high-performance 5-channel Class A/B amplifier designed for car audio systems. It features switchable High-Pass (HP) and Low-Pass (LP) filters, a full active mode, and includes a wired RTC remote control for convenient adjustments. The amplifier supports an input sensitivity range of 0.2V to 6V and includes a high-level RCA input with automatic turn-on capability.

Nøglefunktioner:

• 5-Channel Class A/B Amplivligere
• Switchable High-Pass (HP) and Low-Pass (LP) Filters
• Full Active Mode
• Wired RTC Remote Control Included
• Input Sensitivity: 0.2V - 6V
• High-Level RCA Input with Auto-On
• Power Output: 4 x 60W RMS (4 Ohm) / 4 x 85W RMS (2 Ohm) and 1 x 250W RMS (4 Ohm mono) / 1 x 350W RMS (2 Ohm mono)

Produkt Views

Figur 3.1: Øverst view of the CO-600.5 amplifier, highlighting its sleek design and branding.

Figur 3.2: Forside view af amplifier, displaying the cooling fins.

Figur 3.3: Bagside view af amplifier, detailing the power input (GND, REM, +12V) and speaker output terminals.

Figure 3.4: Input and control panel, featuring RCA inputs, gain level adjustments, and crossover frequency controls.

Figur 3.5: Vinklet view providing a comprehensive look at both connection sides of the amplivligere.

4. Opsætning og installation

Korrekt installation er afgørende for din ydeevne og levetid amplifier. It is highly recommended that installation be performed by a qualified professional.

4.1 Monteringssted

• Vælg et tørt, godt ventileret sted væk fra direkte sollys og varmekilder.
• Sørg for tilstrækkelig luftgennemstrømning omkring amplifier for korrekt afkøling.
• Monter amplifier securely to a solid surface using appropriate hardware to prevent movement during vehicle operation.

4.2 Ledningsforbindelser

Før du foretager nogen tilslutninger, skal du frakoble bilens negative batteripol.

• Strøm (BATT+): Connect a fused power cable directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure the fuse is located within 30cm of the battery.
• Jord (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface on the vehicle chassis. The connection point must be free of rust and paint.
• Fjernbetjening (REM): Tilslut en fjernbetjeningsledning fra din hovedenheds fjernbetjeningsudgang til REM-terminalen på amplifier. Dette vil tænde amptænd og sluk for støjrelæet med din hovedenhed.
• RCA-indgange: Connect your head unit's RCA outputs to the amplifier's RCA inputs (CH1/2, CH3/4, SUB IN).
• Højttalerudgange: Connect your speakers to the corresponding speaker output terminals (CH1, CH2, CH3, CH4, SUBWOOFER). Observe correct polarity (+ to + and - to -).

5. Betjeningsvejledning

Når amplifier is correctly installed and wired, you can proceed with initial setup and operation.

5.1 Indledende tænding

• Tilslut køretøjets negative batteripol igen.
• Tænd din hovedenhed. amplifier should power on automatically via the remote wire. The power indicator LED on the ampLysdioden skal lyse.

5.2 Gain Level Adjustment

The gain control (LEVEL) matches the amplifier's input sensitivity to the output of your head unit. This is not a volume control.

• Indstil amplifier's gain control to minimum (fully counter-clockwise).
• Set your head unit's volume to about 75-80% of its maximum.
• Langsomt øge ampSkru derefter lidt ned for forstærkningskontrollen på lydgiveren, indtil du hører en let forvrængning, og skru derefter lidt tilbage, indtil lyden er klar.

5.3 Crossover Settings (X-OVER)

The CO-600.5 features switchable HP (High-Pass) and LP (Low-Pass) filters for precise sound tuning.

• HPF (højpasfilter): Allows frequencies above the set point to pass through. Use for full-range speakers to prevent low frequencies that can cause distortion.
• LPF (lavpasfilter): Allows frequencies below the set point to pass through. Use for subwoofers to prevent high frequencies.
• Adjust the crossover frequencies (e.g., 50Hz-250Hz for HPF, 30Hz-250Hz for LPF) according to your speaker specifications and listening preferences.

5.4 RTC Remote Control

The included wired RTC remote control allows for convenient adjustment of the subwoofer level from the driver's seat.

6. Vedligeholdelse

The Audio System CO-600.5 amplifier requires minimal maintenance.

• Behold ampRengøring af apparatet er ren og fri for støv. Brug en blød, tør klud til rengøring.
• Ensure all connections remain secure. Periodically check wiring for any signs of wear or corrosion.
• Do not use harsh chemicals or abrasive cleaners on the amplivligere.

7. Fejlfinding

Hvis du oplever problemer med din ampLifier, se følgende almindelige problemer og løsninger:

If the problem persists after attempting these solutions, please contact Audio System customer support or a qualified car audio technician.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Audio System dealer. Warranty terms and conditions may vary by region and retailer.

For technical support, service, or inquiries regarding spare parts, please contact Audio System customer service directly or visit their official website. Contact information is typically available on the product packaging or the manufacturer's webwebsted.

Fabrikant: Lydsystem

Producentens adresse: JRS Labs - The Art of Sound, Heinrich-Heine-Straße 13A, 63329 Rödermark