Globe Electric Verona lysekrone med 4 lys (model 65951) brugsanvisning

1. Introduktion

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Globe Electric Verona 4-Light Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Verona 4-Light Chandelier features a rustic design with a dark bronze finish, antique brass accents, and clear glass shades. It is designed to add a sophisticated element to your space.

2. Vigtige sikkerhedsoplysninger

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

• Læs alle instruktioner omhyggeligt før installation.
• Sørg for, at monteringsfladen kan bære armaturets vægt.
• Brug kun den specificerede pæretype og wattage.
• Tilslut ikke denne armatur til et ujordet elektrisk system.
• Keep flammable materials away from the light bulbs.
• Brug sikkerhedsbriller og handsker under installationen.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Chandelier fixture body
• Adjustable hanging rods (three 18.91-inch sections)
• Clear glass shades (4)
• Mounting hardware (crossbar, screws, wire nuts)
• Informationsblad

4. Nødvendigt værktøj (medfølger ikke)

• Phillips skruetrækker
• Trådstrippere/skærere
• Elektrisk tape
• Tang
• Stige

5. Installationsvejledning

Before you begin, ensure power is OFF at the circuit breaker.

5.1. Forbered til installation

1. Carefully unpack the fixture and its components.
2. Review the included parts list to ensure all items are present.
3. Determine the desired hanging height for your chandelier. The hanging bar comes in three 18.91-inch sections, allowing for customization. The maximum hanging height is 60 inches, and the minimum is 30 inches.

5.2. Install the Mounting Crossbar

4. Attach the mounting crossbar to the electrical junction box in your ceiling using the provided screws. Ensure it is securely fastened.
5. The crossbar may have multiple holes; select the pair that aligns with your junction box.

5.3. Elektriske forbindelser

6. Carefully connect the electrical wires:
   • Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut jord ledning (blank kobber eller grøn) fra armaturet til jord wire from the junction box and the mounting crossbar using a wire nut.
7. Ensure all wire connections are secure by gently tugging on each wire.
8. Carefully tuck all connected wires and wire nuts into the junction box.

5.4. Assemble and Hang the Fixture

9. Thread the chosen length of hanging rods onto the fixture body.
10. Attach the top of the hanging rods to the ceiling canopy.
11. Secure the ceiling canopy to the mounting crossbar using the provided screws. Ensure the fixture is stable and flush against the ceiling. The fixture can be installed on a sloped or vaulted ceiling due to its pivot joint.

5.5. Install Shades and Bulbs

12. Gently place the clear glass shades over the bulb sockets.
13. Install four E12/candelabra base 60W maximum bulbs (sold separately) into the sockets. LED bulbs are recommended for energy efficiency.

Image 1: Globe Electric Verona 4-Light Chandelier, Antique Brass finish.

Billede 2: Nærbillede view of the chandelier's clear glass shades and bulb sockets.

Image 3: Detailed dimensions and adjustable height information for the chandelier.

6. Betjeningsvejledning

Once installed, restore power to the circuit. The chandelier is operated via a standard wall switch. This fixture is fully dimmable with a compatible dimmer switch (sold separately), allowing you to create the perfect atmosphere.

7. Vedligeholdelse

7.1. Rensning

To clean the fixture, ensure power is off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.

7.2. Udskiftning af pære

Always turn off power before replacing bulbs. Allow bulbs to cool completely before touching. Replace bulbs with E12/candelabra base bulbs, not exceeding 60 watts per bulb.

8. Fejlfinding

• Lyset tænder ikke:
  Check if the power is on at the circuit breaker. Ensure all wire connections are secure. Verify that the light bulbs are correctly installed and not burnt out.
• Flimrende lys:
  Ensure bulbs are fully screwed in. Check for loose wire connections. If using a dimmer, ensure it is compatible with the bulbs and fixture.
• Beslaget er løst:
  Tighten the mounting screws on the crossbar and the canopy screws. Do not overtighten.

9. Specifikationer

10. Garanti og support

Dette produkt sælges med Ingen garanti as per the manufacturer's specifications. For any questions or assistance, please contact Globe Electric customer support.