1. Produktet er slutview
The Gardner Bender GHG-1575 grommets are designed to protect wires and cables from sharp metal edges. They prevent chafing and damage to insulation when wires pass through drilled holes or cutouts in metal surfaces. Made from flexible vinyl, these grommets ensure a secure and protective barrier for your electrical wiring projects.
- Indvendig diameter: 3/4 tomme (19.1 mm)
- Konstruktion: Flexible vinyl
- Farve: Sort
- Fungere: Protects cable insulation from damage
This package contains three (3) individual grommets, ready for installation.
2. Installation
The Gardner Bender GHG-1575 grommets are designed for simple, tool-free installation. Follow these steps:
- Forbered hullet: Ensure the hole in the metal box or sheeting is clean and free of burrs. The suitable hole size for this grommet is approximately 1 inch (25.4 mm) in diameter.
- Sikkerhed først: Before working on any electrical circuit, always shut off power. Use approved materials and conform to all applicable electrical codes.
- Insert the Grommet: Align the grommet with the prepared hole.
- Klik på plads: Gently press the grommet into the hole. The flexible vinyl construction allows it to snap securely into place, forming a protective lining.
- Ruteledninger: Once the grommet is installed, carefully route your wires or cables through the 3/4-inch inside diameter opening.
3. Betjening
The Gardner Bender GHG-1575 grommet is a passive protective component. Once installed, it requires no active operation. Its function is to continuously protect wires and cables from abrasion and damage caused by sharp edges of metal openings.
4. Vedligeholdelse
These grommets are designed for long-term durability and typically require no maintenance. Periodically inspect the grommets in critical applications to ensure they remain securely in place and are not damaged. If a grommet appears damaged or dislodged, replace it to maintain proper wire protection.
5. Fejlfinding
As a simple, passive component, troubleshooting for the GHG-1575 grommet is generally not applicable. If a grommet does not fit correctly, ensure the hole size matches the recommended 1-inch diameter. If a grommet becomes dislodged, re-install it or replace it if damaged.
6. Specifikationer
| Fabrikant | Gardner Bender |
| Varenummer / Model | GHG-1575 |
| Varens vægt | 0.96 ounces (for pakken) |
| Farve | Sort |
| Indvendig diameter | 3/4 tomme (19.1 mm) |
| Anbefalet hulstørrelse | 1 tomme (25.4 mm) |
| Vare Pakke Antal | 3 |
| UPC | 032076898311 |
7. Sikkerhedsoplysninger
WARNING / PRECAUTION / ADVERTISEMENT
SIKKERHED FØRST: Always shut off power before working on a circuit. Use approved materials and conform to all electrical codes and safety regulations applicable to your region and project.
8. Garanti og support
For specific warranty information regarding the Gardner Bender GHG-1575 grommets, please refer to the official Gardner Bender website or contact their customer support directly. General product information and support can be found at gardnerbender.com.
