Indledning
Thank you for choosing the Spanninga Kendo+ XE LED Headlight. This manual provides essential information for the proper installation, operation, and maintenance of your new headlight. Please read this manual thoroughly before using the product to ensure safe and efficient performance. This headlight is designed for bicycles and offers reliable illumination with its 30 lux LED output and robust construction.
The Kendo+ XE features a durable plastic housing, a powerful LED, and comes with an HB06 V-brake holder for easy mounting. It is water-resistant with an IPX6 rating, making it suitable for various weather conditions.
Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:
- Se ikke direkte ind i lysstrålen, når forlygten er tændt, da det kan forårsage midlertidig synsnedsættelse.
- Ensure the headlight is securely mounted before each ride to prevent it from falling off.
- Keep the headlight clean and free from obstructions to maintain optimal light output.
- Do not attempt to disassemble or modify the headlight. This may void the warranty and could lead to malfunction or injury.
- This product is water-resistant (IPX6), but it is not designed for submersion. Avoid prolonged exposure to heavy rain or direct water jets.
- Ensure the power source (6-36 V DC) is compatible with the headlight's requirements. Incorrect voltage kan beskadige enheden.
Pakkens indhold
Kontroller venligst, at alle varer er til stede i pakken:
- Spanninga Kendo+ XE LED Headlight
- HB06 V-brake holder
- 690 mm connection cable
Opsætning og installation
Follow these steps to properly install your Spanninga Kendo+ XE LED Headlight:
- Identificer komponenter: Familiarize yourself with the headlight unit and the HB06 V-brake holder. The headlight has a clear lens at the front and a mounting point at the bottom. The holder is designed to attach to your bicycle's V-brake mount.
- Attach Holder to Bicycle: Secure the HB06 V-brake holder to the designated mounting point on your bicycle's front fork or V-brake bolt. Ensure it is firmly tightened to prevent movement during rides.
- Mount Headlight to Holder: Align the headlight with the mounting point on the HB06 holder. Use the provided screws or fasteners to securely attach the headlight to the holder. Ensure the headlight is facing forward and is level.
- Tilslut strømkabel: The headlight comes with a 690 mm cable. Connect this cable to your bicycle's dynamo or compatible 6-36 V DC power source. Ensure the polarity is correct as indicated on the headlight or in your bicycle's wiring diagram. Secure any loose cables to prevent them from interfering with moving parts.
- Juster strålevinkel: Once mounted, adjust the angle of the headlight so that the beam illuminates the road ahead without blinding oncoming traffic or pedestrians. Typically, the beam should be aimed slightly downwards.
Figur 1: Samlet set view of the Spanninga Kendo+ XE LED Headlight with its integrated mounting bracket.
Figur 2: Side view illustrating the design of the mounting bracket for attachment to the bicycle.
Figur 3: Bagside view of the headlight, highlighting the attachment mechanism to the V-brake holder.
Figur 4: Forside view of the headlight, showing the main LED and integrated reflector for enhanced visibility.
Betjeningsvejledning
The Spanninga Kendo+ XE LED Headlight is designed for straightforward operation:
- Tænd/sluk: The headlight is typically controlled by your bicycle's dynamo system or an external switch connected to your DC power source. When the power source is active, the headlight will illuminate. There is no separate on/off switch on the headlight unit itself.
- Lysoutput: The headlight provides a consistent 30 lux brightness. There is only one setting for light output.
- Refleks: The integrated front reflector enhances your visibility to others, even when the light is not active.
Opretholdelse
To ensure the longevity and optimal performance of your headlight, follow these maintenance guidelines:
- Rensning: Wipe the headlight and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they can damage the plastic housing or lens.
- Inspektion: Regularly check the mounting bracket and screws for tightness. Vibrations from riding can loosen fasteners over time.
- Kabelintegritet: Periodically inspect the power cable for any signs of wear, fraying, or damage. Replace if necessary to prevent electrical issues.
- Opbevaring: If storing your bicycle for an extended period, ensure the headlight is clean and dry. Store in a cool, dry place away from direct sunlight.
Fejlfinding
If you encounter issues with your Spanninga Kendo+ XE LED Headlight, refer to the table below for common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Forlygten tænder ikke. | No power from dynamo/power source. Løst eller afbrudt kabel. Forkert ledningspolaritet. | Check your bicycle's dynamo or power source for proper function. Ensure all cable connections are secure and not damaged. Verify cable polarity according to your bicycle's wiring diagram. |
| Lysudgangen er svag eller flimrer. | Utilstrækkelig strømforsyning. Beskidt linse. Løs forbindelse. | Ensure consistent power supply from your dynamo/source. Clean the headlight lens with a soft, damp klæde. Kontroller alle kabelforbindelser for tæthed. |
| Headlight is loose or wobbles. | Monteringsskruerne er løse. Holder not securely attached to bicycle. | Tighten the screws that attach the headlight to the HB06 holder. Ensure the HB06 holder is securely fastened to your bicycle's V-brake mount. |
If the problem persists after attempting these solutions, please contact Spanninga customer support or your local dealer for assistance.
Specifikationer
Detailed technical specifications for the Spanninga Kendo+ XE LED Headlight:
| Feature | Specifikation |
|---|---|
| Modelnavn | Kendo+ Xe |
| Varenummer | 79219 |
| Lyskilde | 1 LED |
| Lysstyrke | 30 lux |
| Strømkilde | 6-36 V DC (Battery Powered) |
| Materiale | Plast |
| Farve | Sort |
| Monteringstype | Frame Mount (HB06 V-brake holder included) |
| Vandmodstandsniveau | Vandtæt (IPX6) |
| Antal indstillinger | 1 |
| Emne Pakke Dimensioner | 11.81 x 7.87 x 5.91 tommer |
| Pakkevægt | 0.3 kilo |
Garanti og support
Spanninga products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your purchase or visit the official Spanninga webwebsted. Gem din købsbevis i tilfælde af garantikrav.
For technical support, spare parts, or further inquiries, please contact your local Spanninga dealer or visit the Spanninga official webwebsted for kontaktoplysninger.
