SONICAKE VolWah Active Volume/Wah Pedal Brugsanvisning

1. Introduktion

The SONICAKE VolWah is a compact, 2-in-1 active volume and wah effect pedal designed for electric guitars. This manual provides detailed instructions for setting up, operating, and maintaining your pedal to ensure optimal performance.

2. Sikkerhedsoplysninger

• Use only a DC 9V center-negative power adapter (not included).
• Enheden må ikke skilles ad eller modificeres.
• Undgå at udsætte enheden for ekstreme temperaturer, fugtighed eller direkte sollys.
• Opbevares utilgængeligt for børn.
• Sørg for korrekt ventilation for at forhindre overophedning.

3. Pakkens indhold

• SONICAKE VolWah Active Volume/Wah Pedal
• Instruktionsmanual (dette dokument)

4. Produktet er slutview

Familiarize yourself with the controls and connections of your VolWah pedal.

Billede 1: SONICAKE VolWah Pedal showing input, output, DC 9V, and footswitch with numbered labels.

• 1. Indgangsstik: Tilslut din guitar eller et andet instrument her.
• 2. DC 9V Power Input: Connect a standard 9V DC center-negative power adapter.
• 3. Footswitch (Hidden): Press down firmly with your toe to switch between Volume and Wah modes.
• 4. MIN VOL Knob: Adjusts the minimum volume level in Volume mode (0-50% range).
• 5. Udgangsstik: Opret forbindelse til din amplifier eller andre effektpedaler.
• QUALITY Knob: Adjusts the Q value of the wah effect, influencing the sharpness of the wah tone.
• RANGE Knob: Selects different center frequency ranges for the wah effect.
• LED-indikatorer: Two LEDs indicate the pedal's active mode (e.g., one for Volume, one for Wah).

5. Opsætning

1. Strømtilslutning: Connect a DC 9V center-negative power adapter to the DC 9V input jack. The pedal does not operate on batteries.
2. Instrumenttilslutning: Connect your electric guitar to the "Input" jack of the VolWah pedal using a standard 1/4-inch instrument cable.
3. Amplifier tilslutning: Connect the "Output" jack of the VolWah pedal to your amplifier or the input of your next effect pedal in the signal chain using a standard 1/4-inch instrument cable.
4. TRS Cable for Active Volume: For optimal active volume control and to avoid impedance mismatch issues, it is recommended to use a TRS (Tip-Ring-Sleeve) cable for connections where active volume control is critical.

Billede 2: Connection diagram for the VolWah pedal in a typical guitar setup.

6. Betjeningsvejledning

6.1 Tænd/sluk

The pedal powers on automatically when connected to a 9V DC power supply. Disconnect the power supply to turn off the pedal.

6.2 Switching Modes (Volume / Wah)

The VolWah pedal features a hidden footswitch. To toggle between Volume and Wah modes, press down firmly on the toe end of the pedal until you feel a click. The LED indicators will change to show the active mode.

Billede 3: Demonstrating how to engage the footswitch by pressing the toe end of the pedal.

6.3 Lydstyrketilstand

In Volume mode, the pedal acts as an active volume control. Move the pedal from heel (minimum volume) to toe (maximum volume) to adjust your guitar's output level.

• MIN VOL Knob: Use this knob to set the minimum volume level when the pedal is in the heel-down position. This allows for precise control over your volume swells.

6.4 Wah Mode

In Wah mode, the pedal produces a classic wah-wah effect. Move the pedal from heel (bass frequencies) to toe (treble frequencies) to sweep through the wah effect.

• QUALITY Knob: This knob adjusts the "Q" value of the wah filter. Turning it clockwise will make the wah effect sharper and more pronounced.
• RANGE Knob: Use this knob to select different center frequency ranges for the wah effect, allowing you to fine-tune the character of your wah sound.

6.5 LED-indikatorer

The two LED lights on the pedal indicate its current operating mode. Refer to the product overview for specific LED color assignments for Volume and Wah modes.

7. Nøglefunktioner

• 100% Analog Volume/Wah 2-in-1 Pedal.
• Lightweight yet robust and well-built casing.
• Active Volume Control prevents impedance mismatch issues.
• Vintage Wah Sound style.
• Seamless switching between Volume & Wah via hidden footswitch.
• Dual LED indicators for clear mode identification.

8. Specifikationer

Billede 4: Dimensions of the SONICAKE VolWah pedal.

9. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre pedalen. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the pedal in a dry, cool place away from direct sunlight when not in use.
• Forbindelser: Regularly check all cable connections for wear and tear.

10. Fejlfinding

11. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle SONICAKE webwebstedet eller kontakt din lokale forhandler. Gem din købskvittering som købsbevis.