Brugermanual til LuxPower cykellygtesæt

1. Produktet er slutview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• 1 x LuxPower LED Headlight (300 Lumens)
• 1 x LuxPower LED Taillight
• 2 x USB ladekabler
• 1 x Headlight Mounting Bracket
• 1 x Taillight Mounting Strap
• 1 x brugermanual

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. Opsætning og installation

3.1 Montering af forlygte

1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
2. Slide the LuxPower headlight onto the bracket until it clicks into place.
3. Adjust the angle of the headlight to illuminate the path ahead without blinding oncoming traffic.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 Taillight Installation

1. Wrap the taillight mounting strap around your bicycle's seat post.
2. Secure the strap firmly, ensuring the taillight is facing directly backward.
3. Adjust the position to ensure maximum visibility from the rear.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. Betjeningsvejledning

4.1 Tænd/sluk

• To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
• To turn off the light, press and hold the power button again for 2 seconds.

4.2 Valg af tilstand

Once the light is on, short press the power button to cycle through the available lighting modes:

• Høj: Maximum brightness for optimal visibility.
• Medium: Balanceret lysstyrke til generel brug.
• Lav: Reduceret lysstyrke for længere batterilevetid.
• Blitz/Strobe: Flashing pattern for increased daytime visibility or emergency signaling.

4.3 Opladning af lysene

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
2. Åbn forsigtigt gummiklappen.
3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
5. Once fully charged, disconnect the cable and firmly close the rubber flap to maintain water resistance.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. Vedligeholdelse

• Rensning: Wipe the light units with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Batteripleje: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
• Opbevaring: Opbevar lysene et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Vandtæthed: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower webwebsted.

Gem venligst din købsbevis i tilfælde af garantikrav.