Parkside PABS X20V batteridrevet boremaskine brugermanual

Indledning

This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your Parkside PABS X20V Cordless Drill Driver. Please read this manual thoroughly before using the tool and keep it for future reference.

Image: The Parkside PABS X20V Cordless Drill Driver, showing its green and black body with a red 20V Lithium-ion battery attached at the base.

Sikkerhedsinstruktioner

Overhold altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade.

• Bær passende personlige værnemidler (PPE) såsom sikkerhedsbriller, høreværn og handsker.
• Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
• Hold børn og omkringstående væk, mens du betjener værktøjet.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Frakobl altid batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.

Komponenter overview

Familiarize yourself with the main components of your drill driver:

• chuck: For holding drill bits and screwdriver bits.
• Momentjusteringsring: To select the desired torque setting.
• Gearvælger: For switching between 1st (low speed, high torque) and 2nd (high speed, low torque) gears.
• Udløserkontakt: Aktiverer boremaskinen og styrer hastigheden.
• Frem/Baglæns kontakt: Ændrer rotationsretningen.
• LED arbejdslys: Oplyser arbejdsområdet.
• Batteri pakke: Detachable 20V Lithium-ion battery.
• Bælteklips: For praktisk transport.
• Magnetisk bitholder: For storing bits.

Opsætning

1. Opladning af batteriet

The 20V Lithium-ion battery requires charging before first use. Use only the supplied fast charger.

1. Tilslut opladeren til en stikkontakt.
2. Skub batteripakken ind i opladeren, indtil den klikker på plads.
3. Opladerens indikatorlampe viser opladningsstatus. En fuld opladning tager typisk 60 minutter.
4. Once fully charged, remove the battery from the charger. The charger features an auto shut-off function.

Image: A Parkside 20V Lithium-ion battery pack being charged on its dedicated fast charger.

2. Attaching/Detaching the Battery

• For at vedhæfte: Juster batteripakken med bunden af ​​borehåndtaget, og skub den ind, indtil den klikker sikkert.
• For at afmontere: Tryk på udløserknapperne på siderne af batteripakken, og skub den ud.

Billede: Et nærbillede view of the base of the Parkside drill, showing the battery attachment mechanism and release buttons.

3. Installing Drill/Screwdriver Bits

1. Ensure the drill is switched off and the battery is removed.
2. Drej spændepatronen mod uret for at åbne kæberne.
3. Sæt det ønskede bor eller skruetrækkerhoved i patronen.
4. Rotate the chuck clockwise to tighten the jaws securely around the bit. The chuck features an auto-locking mechanism.

Betjeningsvejledning

1. Valg af hastighed og moment

• Gearvælger: Use the gear selector switch on top of the drill to choose between:
  • Gear 1 (0-400 o/min): Til applikationer med højt moment, som f.eks. idrejning af skruer eller boring af store huller.
  • Gear 2 (0-1400 o/min): For high speed applications like drilling small holes.
• Momentjusteringsring: Rotate the ring behind the chuck to select one of the 25 torque settings. Choose a lower setting for softer materials or smaller screws to prevent overtightening, and a higher setting for harder materials or larger screws. The drill setting is for drilling without torque limitation.

2. Start og stop

• At begynde: Press the trigger switch. The speed is steplessly adjustable by varying the pressure on the trigger.
• At stoppe: Release the trigger switch. The quick stop system will halt rotation immediately.

3. Fremad/bagud rotation

Use the forward/reverse switch, located above the trigger, to select the desired rotation direction. Push left for forward (clockwise) rotation, and right for reverse (counter-clockwise) rotation. Ensure the switch is in the center position for safety when not in use.

4. LED arbejdslys

Den indbyggede LED lamp automatically illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din boreskruetrækkers levetid og optimale ydeevne.

• Rensning: Hold ventilationsåbningerne rene og fri for skader. Brug en blød, tøramp en klud til at tørre værktøjet af. Brug ikke opløsningsmidler eller slibende rengøringsmidler.
• Opbevaring: Store the tool and battery in a dry, cool place, away from direct sunlight and moisture. Ensure the battery is partially charged before long-term storage.
• Batteripleje: Do not expose batteries to extreme temperatures or direct sunlight. Avoid deep discharge.
• Vedligeholdelse af borepatron: Rengør spændepatronens kæber med jævne mellemrum for at sikre korrekt greb om borene.

Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

Specifikationer

Image: A diagram illustrating the compatibility of the Parkside X20V TEAM battery with various other Parkside X20V tools.

Garantioplysninger

This Parkside PABS X20V Cordless Drill Driver is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your proof of purchase for any warranty claims.

Kundesupport

For technical assistance, spare parts, or service inquiries, please contact Parkside customer support. Contact details can typically be found on the product packaging or the official Parkside webwebsted.

When contacting support, please have your model number (PABS X20V) and purchase date readily available.