POS B0778JDG2P

Instruktionsmanual

POS Corded Black No Dial Telephone

Model: B0778JDG2P

Indledning

This manual provides essential information for the proper setup, operation, and maintenance of your POS Corded Black No Dial Telephone. This telephone is specifically designed for incoming calls only, making it ideal for environments where outbound dialing is not required, such as hotel lobbies, car rental agencies, or public areas. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Sikkerhedsoplysninger

  • Udsæt ikke telefonen for vand eller overdreven fugt.
  • Avoid placing the telephone near heat sources or direct sunlight.
  • Use only the provided cords.
  • Forsøg ikke selv at åbne eller reparere telefonen. Overlad al service til kvalificeret personale.
  • Opbevares utilgængeligt for små børn.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • POS Corded Black No Dial Telephone Unit
  • Oprullet håndsætledning
  • Line Cord (for connection to wall jack)

Opsætning

  1. Tilslut håndsættet: Plug one end of the coiled handset cord into the handset and the other end into the designated jack on the telephone base.
  2. Tilslut til telefonlinje: Plug one end of the line cord into the "LINE" jack on the back or side of the telephone base. Plug the other end of the line cord into a standard telephone wall jack (RJ11).
  3. Placering: Place the telephone on a stable, flat surface. Ensure the metal base is secure.
POS Corded Black No Dial Telephone with handset and cords connected
Image: The POS Corded Black No Dial Telephone, showing its compact design, the coiled handset cord, and the main unit. This model is designed for simplicity, featuring no dial pad, only a receiver and base.

Betjeningsvejledning

This telephone is designed exclusively for receiving incoming calls.

  • Modtagelse af et opkald: When the telephone rings, lift the handset from the base to answer the call.
  • Afslutning af et opkald: Place the handset back onto the base to end the call.
  • Ringer Control: The telephone features a real bell ringer. Locate the ringer ON/OFF switch, usually on the side or bottom of the base, to enable or disable the ringing sound.
  • Handset Volume Control: Adjust the volume of the incoming audio during a call using the volume control switch or slider located on the handset.
  • Dataport: The integrated dataport allows for connection of other devices, such as a modem or fax machine, if needed.

Opretholdelse

  • Rensning: Tør telefonen af ​​med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
  • Ledningspleje: Avoid tangling or stretching the cords excessively to prevent damage.
  • Opbevaring: If storing the telephone for an extended period, disconnect it from the wall jack and store it in a cool, dry place.

Fejlfinding

ProblemMulig årsagLøsning
No ring when a call comes in.Ringer switch is OFF.Locate the ringer ON/OFF switch and set it to ON.
Kan ikke høre den, der ringer op, eller den, der ringer op, kan ikke høre mig.Cords are not properly connected; Handset volume is too low.Ensure all cords are securely plugged in. Adjust the handset volume control.
No dial tone (though this phone is incoming only, a basic line check).Telephone line issue; Cord not connected.Check if the line cord is securely connected to the wall jack. Test the wall jack with another working phone if possible. Contact your telephone service provider if the issue persists.

Specifikationer

  • Model: B0778JDG2P
  • Mærke: POS
  • Farve: Sort
  • Telefontype: Corded, No Dial
  • Materiale: Metalbase
  • Strømkilde: Corded Electric (Line Powered)
  • Kompatible netværk: PSTN, Landline Networks
  • Operation: Incoming Calls Only, Single-Line Operation
  • Funktioner: Real Bell Ringer (On/Off), Handset Volume Control, Dataport

Garanti og support

For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer, POS. Keep your purchase receipt as proof of purchase.

For generelle forespørgsler kan du besøge produktsiden på Amazon: amazon.com/dp/B0778JDG2P

Relaterede dokumenter - B0778JDG2P

Preview Honeywell Voyager XP 1470g-seriens hurtigstartguide
Lynstartvejledning til Honeywell Voyager XP 1470g-seriens kablede områdescanner, der dækker opsætning, tilslutningsmetoder (USB, tastaturkile, RS232, RS485), læseteknikker og grundlæggende konfiguration.
Preview Ingenico AXIUM DX4000 Desktop Brugervejledning
Brugervejledning til Ingenico AXIUM DX4000 Desktop-betalingsterminalen, der dækker opsætning, betjening, sikkerhed og fejlfinding.
Preview Ziosk Z600 Android POS-terminal Hurtigstartguide
Lynvejledning til Ziosk Z600 Android POS-terminalen, der dækker opsætning, opladning, betjening, sikkerhed og vedligeholdelse. Lær, hvordan du bruger din enhed effektivt.
Preview Ingenico AXIUM DX4000 Desktop Brugervejledning
Comprehensive user guide for the Ingenico AXIUM DX4000 Desktop payment terminal, covering setup, usage, maintenance, safety, and technical specifications.
Preview Ingenico AXIUM DX4000 Desktop Brugervejledning
En omfattende brugervejledning til Ingenico AXIUM DX4000 Desktop-terminalen, der dækker opsætning, betjening, vedligeholdelse og sikkerhed.
Preview Brugervejledning til BSD-FR4080 Desktop-stregkodescanner
Brugervejledning til Star Micronics BSD-FR4080 stregkodescanner til stationær brug. Lær om opsætning, konfiguration, USB/RS-232-tilslutning, understøttede symbologier og avanceret dataformatering til effektiv stregkodescanning.