DieHard 71688

DieHard 71688 1150 Peak Amp 12V Jumpstarter med USB/12V bærbare strømporte og 100PSI luftkompressor brugermanual

Model: 71688 | Mærke: DieHard

Produkt overview

The DieHard 71688 Platinum Portable Power unit is a versatile device designed to provide emergency jump-starting capabilities, portable power, and air compression. It features AC power, DC power, USB charging, and an automatic digital air compressor. This multi-purpose unit is equipped with numerous safety features, including a replaceable sealed lead-acid battery, clamp hook-up safeguards, and USB protection. It delivers 1150 peak amps for jump starts and offers various charging options for your devices.

DieHard 71688 1150 Peak Amp 12V Jump Starter, front view with all features visible.

Figur 1: Forside view of the DieHard 71688 Portable Power unit, showcasing its various ports and controls.

Nøglefunktioner

Hvad er der i æsken

Opsætning

Indledende opladning

Before first use, fully charge the DieHard 71688 unit. Connect the unit to a standard AC wall outlet using an extension cord (not included) and the integrated charging port on the back. The digital display will indicate the battery charge level. It is recommended to keep the unit continuously charged when not in use to maintain optimal battery health and ensure it's ready for emergencies.

DieHard 71688 1150 Peak Amp 12V Jump Starter, close-up of digital display showing battery percentage.

Figure 2: Close-up of the unit's digital display, which shows battery percentage and other operational information.

Betjeningsvejledning

Hopstart af et køretøj

  1. Ensure the DieHard unit is fully charged.
  2. Sluk bilens tænding og alt tilbehør.
  3. Tilslut den røde positive (+) clamp til den positive (+) pol på køretøjets batteri.
  4. Tilslut den sorte negative (-) clamp to a non-painted metal part of the vehicle's engine block or chassis, away from the battery. Avoid connecting directly to the negative battery terminal.
  5. Turn the "Jump Start" switch on the DieHard unit to the "ON" position.
  6. Forsøg at starte køretøjet. Hvis det ikke starter med det samme, vent et par minutter og prøv igen.
  7. Once the vehicle starts, turn the "Jump Start" switch to "OFF".
  8. Frakobl den sorte negative (-) clamp først, derefter den røde positive (+) clamp.
  9. Opbevar klamps securely in their designated holders on the unit.
DieHard 71688 1150 Peak Amp 12V Jump Starter connected to a car battery for jump starting.

Figure 3: The DieHard unit connected to a vehicle's battery, ready for jump-starting.

Brug af luftkompressoren

  1. Locate the air compressor hose and appropriate nozzle from the accessory bag.
  2. Attach the nozzle to the item you wish to inflate (e.g., tire valve, sports ball).
  3. Connect the air compressor hose to the unit.
  4. Use the digital controls to set the desired PSI. The unit features an automatic shut-off once the target pressure is reached.
  5. Turn on the compressor. Monitor the digital display for real-time pressure readings.
  6. Once inflation is complete, turn off the compressor and disconnect the hose and nozzle.
DieHard 71688 1150 Peak Amp 12V Jump Starter being used to inflate a car tire.

Figure 4: Inflating a car tire using the integrated 100PSI air compressor.

Using Portable Power Ports

DieHard 71688 1150 Peak Amp 12V Jump Starter charging a laptop and other devices using its power ports.

Figure 5: The DieHard unit providing power to various electronic devices, demonstrating its versatility.

Produkt overview Video

Video 1: En kort gennemgangview of the DieHard 71688 1150 Peak Amp 12V Jump Starter, highlighting its key features and functions.

Opretholdelse

Batteripleje og opladning

To ensure the longevity and readiness of your DieHard 71688 unit, it is crucial to maintain its internal battery. Always keep the unit charged when not in use. The internal intelligence prevents overcharging, so it can remain plugged in. Regular charging helps to prevent battery degradation and ensures maximum performance when needed for jump-starting or powering devices.

Opbevaring

Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all cables and accessories are properly stowed in their designated compartments to prevent damage and maintain organization.

Fejlfinding

ProblemMulig årsagLøsning
Enheden tænder ikke eller har lav strøm.Internt batteri er afladet.Fully charge the unit for at least 24 hours. Keep it plugged in when not in use.
Køretøjet starter ikke med startkabler.Ukorrekt clamp connection; vehicle battery severely discharged; unit not fully charged.Tjek klamp connections (ensure proper polarity and good contact). Fully charge the unit. If battery is severely discharged, it may require a longer charge or professional assistance.
Luftkompressoren puster sig ikke op eller stopper for tidligt.Hose/nozzle not securely attached; unit overheating; internal fault.Ensure all connections are tight. Allow the unit to cool down if it has been running for an extended period. If the issue persists, contact customer support.
USB or AC outlets not providing power.Unit not fully charged; AC inverter not activated; device draws too much power.Ensure the unit is fully charged. Activate the AC inverter switch for AC outlets. Check device power requirements against unit's capacity (400W for AC).

Specifikationer

Garanti og support

For warranty information and customer support, please refer to the official owner's manual included with your product. You may also visit the DieHard Store on Amazon or contact Schumacher Electric Corp., the manufacturer, for assistance. Keep your purchase receipt for warranty claims.

Bemærk: Nogle kundersviews indicate potential challenges with manufacturer support. For direct product issues, it is recommended to first consult the provided owner's manual or contact the manufacturer directly.

Relaterede dokumenter - 71688

Preview DieHard Portable Power 1150 Brugermanual: Jumpstarter, luftkompressor, oppustningsanordning, vekselstrøm
Omfattende brugermanual til DieHard Portable Power 1150. Denne vejledning dækker dens funktioner som jumpstarter, DC-strømkilde, luftkompressor, oppustningsanordning og AC-strømkilde, inklusive detaljerede sikkerhedsinstruktioner, betjeningsprocedurer, specifikationer og garantioplysninger.
Preview DieHard Jump Starter og AC/DC/USB strømkilde brugermanual
Omfattende brugermanual til DieHard Jump Starter og AC/DC/USB-strømkilde (model 28.71688), der dækker sikkerhedsinstruktioner, funktioner, opladning, brug, vedligeholdelse og fejlfinding.
Preview DieHard Portable Power 1150 Brugermanual
Omfattende brugermanual til DieHard Portable Power 1150, der beskriver dens funktioner, betjening, sikkerhedsinstruktioner og specifikationer for starthjælp, strømforsyning, luftkompression og vekselstrøm.
Preview DieHard Portable Power 1150 brugermanual: Jumpstarter, luftkompressor, inverter
Omfattende brugermanual til DieHard Portable Power 1150, der beskriver dens funktioner som jumpstarter, DC-strømkilde, luftkompressor, oppustningsanordning og AC-strømomformer. Indeholder sikkerhedsinstruktioner, betjeningsprocedurer, specifikationer og fejlfinding.
Preview DieHard Portable Power 1150 Brugermanual: Jumpstarter, luftkompressor og strømkilde
This operator's manual provides comprehensive instructions for the DieHard Portable Power 1150, a versatile device functioning as a jump starter, DC power source, air compressor, inflator, and AC power unit. It covers safety precautions, operating procedures for each function, maintenance, specifications, and replacement parts.
Preview DieHard DH110 Lithium-ion jumpstarter og 12V strømforsyning brugermanual
Brugermanual til DieHard DH110 litium-ion-starter og 12V-batteripakke. Indeholder sikkerhedsinstruktioner, betjeningsprocedurer, opladning, fejlfinding og specifikationer.