1. Introduktion
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Sikkerhedsinstruktioner
- Elektrisk sikkerhed: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Udendørs brug: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Pære type: Use only R7s halogen bulbs with a maximum wattagpå 150 W. Overskridelse af den maksimale watttage can cause overheating and damage to the fixture or create a fire hazard.
- Håndtering: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Montering: Sørg for, at monteringsfladen er strukturelt solid og kan bære armaturets vægt.
3. Pakkens indhold
Kontroller venligst, at alle komponenter er til stede og ubeskadigede:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Monteringsudstyr (skruer, vægdyvler)
- Instruktionsmanual (dette dokument)
Note: R7s bulb is typically not included and must be purchased separately.
4. Opsætning og installation
Før du begynder: Sørg for, at strømforsyningen til installationsområdet er afbrudt ved hovedafbryderen.
- Forbered monteringsoverfladen: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Monter beslaget: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Ledningsføring: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Installer pæren: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Fastgør armaturet: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Figur 4.2: Nærbillede view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Betjeningsvejledning
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Bevægelsesdetektion: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Lysets varighed: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Vedligeholdelse
- Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Tør af med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller sensoren.
- Udskiftning af pære: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Inspektion: Undersøg regelmæssigt armaturet for tegn på skader, løse forbindelser eller slid. Hvis der findes problemer, skal strømmen afbrydes og en kvalificeret elektriker kontaktes.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Lyset forbliver tændt konstant. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Lyset tændes tilfældigt. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Lyse flimrer. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Strålende |
| Modelnummer | 96162/06 |
| Produktmål (L x B x H) | 14 x 21 x 22 cm |
| Varens vægt | 521 gram |
| IP-vurdering | IP44 |
| Stil | Moderne |
| Farve | Sort |
| Materiale | Metal, glas |
| Antal pærer | 1 |
| Voltage | 230 volt |
| Specifikke anvendelser | Kun udendørs brug |
| Særlige funktioner | Adjustable (sensor/light head) |
| Cap Type | R7s |
| Max Wattage | 150W |
| Strømkilde | Electrical Cable (Wired) |
| Installationstype | Vægmontering |
| Energimærke | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Garanti og support
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
