AUTOOL BT360 12V Batteribelastningstester Brugsanvisning

1. Introduktion

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. Sikkerhedsoplysninger

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

• Wear appropriate eye protection and protective clothing when working near batteries.
• Sørg for, at køretøjet er i et godt ventileret område.
• Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
• Rør ikke ved varme motordele eller bevægelige komponenter.
• Keep the tester and cables away from water, oil, and grease.
• Sørg for, at batteriet clamper sikkert forbundet til de korrekte terminaler (rød til positiv, sort til negativ).
• Hvis batterisyre kommer i kontakt med hud eller øjne, skylles straks med rigeligt vand og søges lægehjælp.

3. Produktet er slutview

3.1 Komponenter

The AUTOOL BT360 package typically includes:

• AUTOOL BT360 Main Unit
• Integrated Testing Cables with Alligator Clamps (Rød for positiv, sort for negativ)
• Brugervejledning (dette dokument)

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

Billede 3.2: Forside view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

• ESC: Escape/Tilbage-knap.
• ØNH: Enter/Bekræft-knap.
• Pil op/ned: Navigation buttons for menu selection.

3.3 Nøglefunktioner

• Performs Battery Test, Cranking Test, and Charging Test.
• Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
• Wide CCA testing range: 100-2400 CCA.
• Flersproget understøttelse af brugergrænsefladen.

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. Specifikationer

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

4.1 Supported Starting Power Supply Standards

Image 4.2: Table showing various starting power supply standards supported by the BT360.

5. Opsætning

5.1 Udpakning

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 Tilslutning af testeren

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

1. Sørg for, at bilens tænding er slukket, og at alt tilbehør er slukket.
2. Tilslut rød positiv (+) clamp til den positive (+) pol på 12V-batteriet.
3. Tilslut sort negativ (-) clamp til den negative (-) pol på 12V-batteriet.
4. Once connected, the tester will power on automatically.

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. Betjeningsvejledning

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 Batteritest

This function evaluates the overall health of the battery.

1. Fra hovedmenuen skal du vælge Batteritest and press ENT.
2. Vælge Batteriplacering: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
3. Vælge Batteritype: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
4. Vælge Test standard: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
5. Sæt Batteriklassificering: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 Starttest

This test analyzes the vehicle's starting system, including the starter motor.

1. Fra hovedmenuen skal du vælge Starttest and press ENT.
2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage under start.
3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 Opladningstest

This test evaluates the vehicle's charging system, including the alternator and regulator.

1. Fra hovedmenuen skal du vælge Opladningstest and press ENT.
2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
3. The tester will measure the charging voltage under load and no-load conditions.
4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. Vedligeholdelse

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

• Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Hold batteriet rentamper ren og fri for korrosion.
• Opbevar testeren et tørt, køligt sted, væk fra direkte sollys og ekstreme temperaturer.
• Undgå at tabe enheden eller udsætte den for kraftige stød.

8. Fejlfinding

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Fabrikant: AUTOOL

Dato først tilgængelig: 27. oktober 2017