1. Introduktion
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Laguna Revo Lathe 24|36. Please read this manual thoroughly before operating the machine.
The Laguna Revo Lathe 24|36 is a robust woodworking machine designed for precision and durability. It features an ergonomic angled control panel made from anodized aluminum, providing intuitive control. The digital readout (DRO) with its blue hue and a beautifully knurled control knob with a rubber grip enhance user experience. The lathe's bed is constructed from steel, ensuring smooth travel for the cast iron headstock and offering superior longevity and strength. Electronic variable speed is managed by a Variable Frequency Drive (VFD), converting single-phase input to three-phase output, which delivers significant torque even at lower speed settings. The DRO provides continuous, accurate RPM readings, with electronic fine adjustments. High and low-speed range changes are facilitated by a quick-release handle. Both headstock and tailstock lock handles are conveniently located at the rear to maintain an unobstructed work area. Ergonomically designed cam lock handles ensure a firm, deflection-free hold.
Figur 1: Overview of the Laguna Revo Lathe 24|36, showcasing its main components including the headstock, tailstock, and bed.
2. Sikkerhedsoplysninger
Always prioritize safety when operating any power tool. Failure to follow safety instructions can result in serious injury or damage to the equipment.
- Læs og forstå alle instruktioner, før du betjener drejebænken.
- Bær passende personlige værnemidler (PPE), herunder sikkerhedsbriller, høreværn og støvmaske.
- Sørg for, at arbejdsområdet er rent, godt oplyst og fri for forhindringer.
- Do not wear loose clothing, gloves, or jewelry that could get caught in moving parts. Tie back long hair.
- Afbryd altid strømmen, før du foretager justeringer, skifter tilbehør eller udfører vedligeholdelse.
- Lad aldrig maskinen køre uden opsyn.
- Keep hands and fingers clear of the rotating workpiece and cutting tools.
- Use only accessories and attachments recommended by Laguna Tools.
- Ensure the lathe is properly grounded and connected to the specified 220V power supply.
3. Opsætning
3.1 Udpakning og placering
Carefully unpack the lathe and all its components. Due to its weight (approximately 670 pounds), ensure proper lifting equipment and assistance are used. Place the lathe on a stable, level surface capable of supporting its weight and resisting vibrations during operation. Ensure adequate clearance around the machine for safe operation and material handling.
3.2 Strømtilslutning
The Laguna Revo Lathe 24|36 requires a 220V power supply. Ensure your electrical system can provide the necessary voltage og amperage. Consult a qualified electrician if you are unsure. Connect the lathe to a dedicated, grounded circuit.
3.3 Komponentmontering
Assemble any detached components such as the tool rest, tailstock, and control panel if they are not pre-installed. The steel bed is designed for smooth travel of the cast iron headstock. Ensure all locking mechanisms are functional and secure.
Figur 2: Nærbillede view of the lathe's steel bed and the "LAGUNA REVO 24|36" branding, highlighting the robust construction.
4. Betjeningsvejledning
4.1 Kontrolpanel overview
The ergonomic angled control panel provides access to all operational functions. It features a digital readout (DRO) for RPM, a knurled control knob for speed adjustment, and controls for forward/reverse and start/stop.
Figur 3: Detaljeret view of the ergonomic control panel, showing the digital readout, speed adjustment knob, and operational buttons.
4.2 Variable Speed Operation
The lathe utilizes an electronic variable speed system via a VFD, ensuring consistent torque across the speed range. Use the knurled control knob to adjust the RPM. The DRO will display the current speed. Fine adjustments are made electronically.
4.3 High/Low Speed Range Selection
To switch between high and low-speed ranges, use the quick-release handle. Ensure the machine is stopped before changing speed ranges to prevent damage.
4.4 Headstock and Tailstock Adjustment
The headstock and tailstock can be positioned along the steel bed. Use the ergonomically designed cam lock handles, located at the back, to secure them firmly in place. This design minimizes interference with your workflow.
Figur 4: View of the tailstock assembly and the control panel, illustrating their positions relative to the lathe bed.
5. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your Laguna Revo Lathe.
- Rensning: After each use, clean the lathe thoroughly, especially the bed, headstock, and tailstock, to remove wood dust and debris. Use a brush or vacuum.
- Smøring: Periodically lubricate moving parts such as the tailstock quill and lead screws according to the manufacturer's recommendations.
- Inspektion: Regularly inspect all fasteners, belts, and electrical connections for wear or damage. Tighten loose fasteners.
- Motorventilation: Sørg for, at motorens ventilationsåbninger er fri for støv og snavs for at forhindre overophedning.
- Værktøjsstøtte: Keep the tool rest clean and free of nicks or burrs to ensure smooth tool movement.
6. Fejlfinding
This section addresses common issues you might encounter with your lathe. For problems not listed here, contact Laguna Tools support.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Drejebænken starter ikke | No power, emergency stop engaged, loose connection. | Check power supply, ensure emergency stop is disengaged, inspect power cord. |
| Motor runs but workpiece does not turn | Drive belt loose or broken, workpiece not secured. | Inspect and adjust/replace drive belt, ensure workpiece is properly mounted and secured. |
| Overdreven vibration | Unbalanced workpiece, loose components, unstable mounting. | Balance workpiece, tighten all fasteners, ensure lathe is on a stable surface. |
| Unøjagtig aflæsning af omdrejningstal | Sensor issue, electrical interference. | Contact Laguna Tools support for diagnosis. |
7. Specifikationer
Key technical specifications for the Laguna Revo Lathe 24|36 (MLAREVO 2436-220):
| Feature | Specifikation |
|---|---|
| Mærke | Laguna |
| Modelnavn | Laguna Revo Lathe 24|36 |
| Modelnummer | MLAREVO 2436-220 |
| Voltage | 220 volt |
| Hestekræfter | 3 hk |
| Hastighed | 1725 RPM (Motor) |
| Materiale | Legeret stål |
| Varens vægt | 670 pund |
| Pakkedimensioner | 61 x 27 x 25 tommer |
| Strømkilde | Elektrisk med ledning |
| Garanti | 2 år |
| UPC | 195444074936, 650434694728 |
8. Garanti og support
8.1 Garantioplysninger
The Laguna Revo Lathe 24|36 comes with a 2 års garanti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Laguna Tools directly.
8.2 Kundesupport
For technical assistance, parts, or service inquiries, please contact Laguna Tools customer support. You can find more information and contact details on the official Laguna Tools website or by visiting their Amazon store:
