Adler AD 1186 LED-ur med termometer brugermanual

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Adler AD 1186 LED Clock with Thermometer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Sikkerhedsinstruktioner

• Sørg for, at enheden er placeret på en stabil, flad overflade.
• Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Hold enheden væk fra vand eller andre væsker.
• Brug kun den angivne strømadapter.
• Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret servicepersonale for at få hjælp.
• Opbevares utilgængeligt for børn.

Pakkens indhold

Tjek venligst pakken for følgende varer:

• Adler AD 1186 LED Clock with Thermometer
• Strømadapter
• Brugervejledning (dette dokument)

Produkt overview

Familiarize yourself with the components of your Adler AD 1186 LED Clock.

Figur 1: Forside View. This image shows the front of the Adler AD 1186 LED Clock. The large LED display clearly shows the time (e.g., 20:18), humidity percentage (e.g., 30% RH), and temperature in Celsius (e.g., 21°C). The Adler logo is visible below the time display.

Figur 2: Betjeningselementer på øverste panel. This image provides a top-down angled view of the clock, highlighting the control buttons. From left to right, buttons include "SETTING", "TIME", "DATE", "ALARM", "SNOOZE" (large central button), "UP", "DOWN", and "DATE". These buttons are used for configuring the clock's various functions.

Figur 3: Bagpanel. This image displays the back of the Adler AD 1186 LED Clock. It shows the power input port for the adapter and a compartment for battery backup, ensuring timekeeping during power outages.

Nøglekomponenter:

• LED display: Shows time, temperature, and humidity.
• Kontrolknapper: Located on the top panel for setting time, date, alarm, and adjusting settings.
• Strømindgang: Til tilslutning af AC-adapteren.
• Batterirum: For backup batteries (type not specified, typically AAA or button cell).

Opsætning

1. Pakker ud: Carefully remove the clock and all accessories from the packaging.
2. Strømtilslutning: Connect the provided power adapter to the DC input port on the back of the clock (refer to Figure 3). Plug the adapter into a standard electrical outlet. The LED display should illuminate.
3. Battery Backup (Optional but Recommended): Open the battery compartment on the rear of the clock. Insert the required backup batteries (e.g., 2x AAA, not included) according to the polarity markings. This will maintain time settings during power interruptions.

Betjeningsvejledning

1. Indstilling af tid og dato

1. Tryk på TID button (refer to Figure 2). The hour digits will start flashing.
2. Brug UP og NED knapper for at justere timen.
3. Trykke TID again to confirm the hour and move to minute adjustment. The minute digits will flash.
4. Brug UP og NED knapper for at justere minutterne.
5. Trykke TID igen for at bekræfte minutterne.
6. To set the date, press the DATO button. The year will flash.
7. Bruge UP og NED to set the year, then press DATO to move to month, and then day.
8. Trykke DATO again to exit date setting mode.

2. Indstilling af alarmen

1. Tryk på ALARM button (refer to Figure 2). The alarm hour digits will flash.
2. Brug UP og NED knapperne for at indstille den ønskede alarmtime.
3. Trykke ALARM again to confirm the hour and move to minute adjustment. The alarm minute digits will flash.
4. Brug UP og NED knapperne til at indstille de ønskede alarmminutter.
5. Trykke ALARM igen for at aktivere alarmen. Et alarmikon vises på displayet.
6. For at deaktivere alarmen skal du trykke på ALARM button until the alarm icon disappears.

3. Snooze-funktion

Når alarmen lyder, skal du trykke på den store SLUM button (refer to Figure 2) to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time is typically 5-9 minutes, refer to specific product details if available).

4. Justering af lysstyrke

The clock features 2 brightness levels. Press the INDSTILLING button (or a dedicated brightness button if present, otherwise cycle through settings) to cycle between the brightness levels. Adjust to your preferred visibility.

5. Temperatur- og fugtighedsvisning

The clock automatically displays the current room temperature and humidity. No special setting is required for this function. The temperature is displayed in Celsius (°C) and humidity as a percentage (% RH).

Opretholdelse

• Rensning: Use a soft, dry cloth to clean the surface of the clock. Do not use abrasive cleaners or solvents.
• Støv: Regularly dust the device to prevent accumulation, especially around vents if any.
• Udskiftning af batteri: If using battery backup, replace batteries annually or when the display shows signs of dimming during power outages.

Fejlfinding

Specifikationer

Garanti og support

Adler products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Adler website. For technical support or service inquiries, please contact Adler customer service through their official channels.

Gem venligst dit købsbevis for garantikrav.