Nerf E1556

Nerf Nitro Bullseye Blast Stuntsæt Brugsanvisning

Model: E1556

1. Introduktion

Welcome to the world of Nerf Nitro! This manual provides essential information for the safe and proper use of your Nerf Nitro Bullseye Blast Stunt Set. Please read all instructions carefully before assembly and play.

The Nerf Nitro Bullseye Blast Stunt Set allows users to launch foam cars for stunt challenges. This set is designed for active play and includes components for setting up exciting car-launching activities.

2. Sikkerhedsoplysninger

3. Hvad er der i æsken

Your Nerf Nitro Bullseye Blast Stunt Set includes the following components:

Nerf Nitro Bullseye Blast Stunt Set packaging
Figure 3.1: Packaging of the Nerf Nitro Bullseye Blast Stunt Set, showing the included foam car and stunt components.

This image displays the product packaging, highlighting the main components: the stunt set with its large circular target, a launching ramp, and a foam car. The packaging also indicates the Nerf Nitro branding and age recommendation.

4. Opsætning

Follow these steps to assemble your Nerf Nitro Bullseye Blast Stunt Set:

  1. Udpak komponenter: Fjern forsigtigt alle dele fra emballagen.
  2. Assemble the Stunt Ramp: Tilslut ramp sections as indicated by the arrows or grooves on the plastic pieces. Ensure they snap securely into place.
  3. Attach the Target: Secure the circular target to the designated slots on the ramp assembly. The target should stand upright and be stable.
  4. Prepare the Launcher: Ensure the car launcher (blaster) is ready for use. No batteries are required for this manual launcher.
Assembled Nerf Nitro Bullseye Blast Stunt Set with foam car
Figure 4.1: Fully assembled Nerf Nitro Bullseye Blast Stunt Set, showing the launcher, ramp, and target.

This image illustrates the complete stunt set, featuring a yellow foam car, a blue launching ramp, and a large grey circular target with a flame design. Two small bullseye targets are also visible on the ramp, positioned before the main target.

5. Betjeningsvejledning

To operate your Nerf Nitro Bullseye Blast Stunt Set:

  1. Load the Foam Car: Place one Nerf Nitro foam car into the launcher. Ensure it is seated correctly.
  2. Prime the Launcher: Pull back the priming mechanism on the launcher until it locks into place.
  3. Sigte: Position the launcher in front of the ramp, aiming the foam car towards the target.
  4. Lancering: Press the trigger to launch the foam car up the ramp and towards the target.
  5. Nulstil: Retrieve the foam car and reset the target if it was hit. Repeat for more stunt action.
Nerf Nitro foam car hitting the bullseye target
Figure 5.1: A yellow foam car is shown in mid-air, having just launched off the blue ramp and is about to hit one of the small bullseye targets on the stunt set.

This image captures the dynamic moment of a foam car hitting a target, demonstrating the core play pattern of the stunt set. The car is yellow with purple wheels, and the target is a small red and yellow bullseye.

6. Vedligeholdelse

7. Fejlfinding

ProblemMulig årsagLøsning
Foam car not launching or launching weakly.Launcher not fully primed. Car not seated correctly. Damaged foam car.Ensure the priming mechanism is pulled back until it clicks. Re-seat the foam car. Use a new, undamaged foam car.
Target not falling when hit.Target not properly assembled or reset.Check that the target is securely attached and fully reset to its upright position.
Foam car veers off course.Improper aiming. Damaged foam car. Uneven launch surface.Adjust aiming. Use a new foam car. Ensure the launcher and ramp are on a flat, stable surface.

8. Specifikationer

9. Garanti og support

For warranty information or customer support, please refer to the official Nerf or Hasbro website, or contact their customer service directly. Specific warranty details may vary by region and purchase location.

No specific warranty or support contact information was provided with this product manual.

10. Produktvideoer

No official product videos directly demonstrating the Nerf Nitro Bullseye Blast Stunt Set were found in the provided data.

Relaterede dokumenter - E1556

Preview Brugervejledning til NERF Digital Target: Opsætning, spil og instruktioner
Omfattende brugervejledning til NERF Digital Target (model 11588). Lær, hvordan du konfigurerer, spiller og mestrer de forskellige spiltilstande som Point Counter, Speed ​​Breaker og Precision Blast. Indeholder batterioplysninger, sikkerhedsadvarsler og funktioner.
Preview Nerf Hyper MACH-100 Blaster: Brugsanvisning og sikkerhedsinstruktioner
Omfattende guide til Nerf Hyper MACH-100 blasteren, der beskriver, hvordan man lader, affyrer, fjerner blokeringer, opbevarer blasteren og vigtige sikkerhedsforanstaltninger. Indeholder batteriinformation og produktkompatibilitet.
Preview Nerf Strike 'N Score digitalt målspil - instruktioner og hvordan man spiller
Officielle instruktioner til Nerf Strike 'N Score Digital Target Game fra Wilder Toys Inc. Lær, hvordan du konfigurerer og spiller forskellige spiltilstande som Overtime, Red vs Blue, Perfect 100 og ... Tag Hold- og batterioplysninger.
Preview Nerf Pro Stryfe X Dart Blaster: Brugermanual og sikkerhedsinstruktioner
Omfattende guide til betjening af Nerf Pro Stryfe X Dart Blaster, inklusive opladning, indlæsning, affyring, sikkerhedsadvarsler og opbevaring. Indeholder detaljerede instruktioner til sikker leg og lovgivningsmæssige oplysninger.
Preview Nerf N-Strike Elite Strongarm Blaster: Brugervejledning
Officiel vejledning til Nerf N-Strike Elite Strongarm legetøjsblasteren. Lær, hvordan du lader pile, affyrer enkeltskud og bruger slam-fire-funktionen til hurtig affyring. Indeholder sikkerhedsadvarsler og produktoplysninger.
Preview Nerf Ultra One Blaster: Monterings-, lade- og affyringsinstruktioner
En omfattende guide til samling, isætning og betjening af Nerf Ultra One motoriserede blaster, inklusive vigtige sikkerhedsoplysninger og tips til fejlfinding.