1. Introduktion
This manual provides essential information for the safe and efficient operation, installation, and maintenance of the Bodine Electric N3695 Right Angle DC Gearmotor. Please read this manual thoroughly before attempting to install or operate the gearmotor. Retain this manual for future reference.
An image showing the Bodine Electric N3695 Right Angle DC Gearmotor, a compact black unit with a finned housing and a protruding shaft, designed for industrial applications.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af udstyret.
- Ensure power is disconnected before performing any installation, maintenance, or troubleshooting.
- Kun kvalificeret personale bør installere, betjene og vedligeholde dette udstyr.
- Protect the gearmotor from moisture, dust, and extreme temperatures.
- Overskrid ikke den angivne voltage og aktuelle vurderinger.
- Sørg for korrekt jording for at forhindre elektrisk stød.
- Keep hands and clothing clear of rotating parts during operation.
3. Opsætning
3.1 Udpakning og inspektion
Carefully remove the gearmotor from its packaging. Inspect for any signs of shipping damage. Report any damage to the carrier immediately.
3.2 Montering
The N3695 gearmotor can be mounted in various orientations. Ensure the mounting surface is flat, rigid, and capable of supporting the gearmotor's weight and operational forces.
- Select a mounting location that allows for adequate ventilation and access for maintenance.
- Secure the gearmotor using appropriate bolts and washers through the mounting holes. Ensure all fasteners are tightened to the manufacturer's recommended torque specifications.
- Verify that the shaft is properly aligned with the driven load to prevent undue stress on the bearings.
3.3 Elektriske forbindelser
Refer to the wiring diagram provided with your specific unit for correct electrical connections. Ensure all connections are secure and insulated.
- Connect the DC power supply to the motor terminals, observing polarity.
- Sørg for, at strømforsyningen voltage matches the gearmotor's rated voltage (24VDC).
- Installer passende overstrømsbeskyttelsesanordninger.
4. Betjening
4.1 Første opstart
Før du tilslutter strømmen, skal du dobbelttjekke alle elektriske forbindelser og monteringssikkerhed.
- Apply power gradually if possible, or directly if not.
- Observe the gearmotor for any unusual noises, vibrations, or excessive heat during the first few minutes of operation.
- If any anomalies are detected, immediately disconnect power and investigate the cause.
4.2 Normal drift
The N3695 gearmotor is designed for continuous duty within its specified ratings. Monitor the gearmotor periodically for optimal performance.
- Ensure the ambient temperature remains within the specified operating range.
- Avoid overloading the gearmotor beyond its rated torque and speed.
5. Vedligeholdelse
Regular maintenance ensures the longevity and reliable operation of your Bodine gearmotor. Always disconnect power before performing any maintenance.
5.1 Rutinemæssige kontroller
- Månedlig: Inspect for loose mounting bolts, worn wiring insulation, and unusual noise or vibration.
- Kvartalsvis: Check for excessive heat buildup. Ensure ventilation fins are clear of debris.
- Årligt: Kontroller, at de elektriske forbindelser er tætte og fri for korrosion.
5.2 Rengøring
Keep the exterior of the gearmotor clean. Use a dry, soft cloth to wipe away dust and dirt. Do not use solvents or abrasive cleaners.
6. Fejlfinding
This section provides solutions to common issues. For problems not listed, contact Bodine Electric technical support.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motor starter ikke | No power; Incorrect wiring; Overload | Check power supply; Verify wiring; Reduce load |
| Overdreven støj/vibration | Misalignment; Loose mounting; Worn bearings | Check alignment; Tighten mounting bolts; Contact service |
| Overophedning | Overload; Insufficient ventilation; High ambient temperature | Reduce load; Clear ventilation; Improve cooling |
7. Specifikationer
Key specifications for the Bodine Electric N3695 Right Angle DC Gearmotor:
| Feature | Værdi |
|---|---|
| Modelnummer | N3695 |
| Type | Right Angle DC Gearmotor (Brushless) |
| Hestekræfter (HK) | 0.25 HK |
| Voltage | 24VDC |
| Nominel hastighed | 500 RPM |
| Varens vægt | 13.8 pund |
| Fabrikant | Bodine |
8. Garanti og support
Bodine Electric Company warrants its products against defects in material and workmanship for a specified period from the date of purchase. For detailed warranty terms and conditions, please refer to the official Bodine Electric webwebsted eller kontakt deres kundeservice.
For technical assistance, parts, or service, please contact an authorized Bodine Electric distributor or visit the official Bodine Electric webwebsted for kontaktoplysninger.
- Officiel Webwebsted: www.bodine-electric.com
- Kundesupport: Der henvises til webhjemmeside for regionale kontaktoplysninger.
