True GDM-72F-HC~TSL01 Tredobbelt svingdørs Merchandiser fryser brugsanvisning

1. Introduktion

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your True GDM-72F-HC~TSL01 Triple Swing Glass Door Merchandiser Freezer. Please read this manual thoroughly before installation and operation to ensure proper usage and to prevent potential hazards.

The True GDM-72F-HC~TSL01 is a commercial-grade merchandiser freezer designed for displaying frozen food and ice cream. It features a self-contained capillary tube system utilizing environmentally friendly R290 hydrocarbon refrigerant, maintaining temperatures at -10°F (-23.3°C).

2. Sikkerhedsoplysninger

Vigtige sikkerhedsinstruktioner:

• Afbryd altid strømmen, før du udfører vedligeholdelse eller rengøring.
• Ensure the unit is installed on a level, stable surface capable of supporting its weight.
• Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning.
• Opbevar ikke eksplosive stoffer såsom spraydåser med et brændbart drivmiddel i dette apparat.
• Only qualified personnel should perform repairs or service on the refrigeration system.
• Keep all ventilation openings in the appliance enclosure or in the structure for building-in, clear of obstruction.

3. Produktfunktioner

• High-quality construction for attractive display of frozen food and ice cream.
• Factory engineered, self-contained capillary tube system using R290 hydrocarbon refrigerant.
• Zero ozone depletion potential (ODP) and low global warming potential (GWP) refrigerant.
• Maintains consistent temperatures of -10°F (-23.3°C) for optimal frozen product storage.
• Triple pane thermal insulated glass door assemblies with white powder-coated frames.
• Twelve (12) adjustable, heavy-duty PVC coated wire shelves (24 1/8"L x 20 3/4"D).
• LED indvendig belysning for forbedret produktsynlighed.
• Durable non-peel or chip black powder-coated cold rolled steel exterior.
• NSF approved white aluminum interior liner with stainless steel floor.
• Self-closing doors with positive seal, torsion-type closure system.
• Bottom-mounted unit design for maximized product visibility and easy condenser coil access.

4. Opsætning og installation

4.1 Udpakning

• Fjern forsigtigt al emballage, inklusive beskyttelsesfilm eller -tape.
• Inspect the unit for any shipping damage. Report any damage immediately to the carrier and supplier.

4.2 Placering

• Place the freezer on a strong, level surface capable of supporting the unit's weight when fully loaded.
• Ensure adequate clearance around the unit for proper ventilation (minimum 6 inches from walls).
• Undgå direkte sollys, varmekilder eller områder med høj luftfugtighed.

4.3 Elektrisk tilslutning

• Connect the unit to a dedicated electrical circuit with the correct voltage og amperage as specified on the unit's data plate.
• Brug ikke forlængerledninger eller adapterstik.
• Sørg for korrekt jording for at forhindre elektrisk stød.

4.4 Første opstart

• After positioning and connecting power, allow the unit to sit for at least 2 hours before plugging it in. This allows refrigerants to settle.
• Plug in the unit. The compressor will start, and the interior lights will illuminate.
• Allow the unit to run empty for several hours (e.g., 4-6 hours) to reach its operating temperature before loading products.

5. Betjeningsvejledning

5.1 Temperaturkontrol

• The freezer is factory-set to maintain approximately -10°F (-23.3°C).
• Refer to the digital temperature controller (if equipped) for specific adjustment instructions. Typically, adjustments involve pressing 'SET' and using arrow keys.

5.2 Indlæsning af produkter

• Load products evenly on the shelves. Do not block the air circulation vents inside the cabinet.
• Undgå at overfylde hylderne ud over deres bæreevne.
• Ensure products do not obstruct the closing of the doors.

5.3 Brug af dør

• The doors are self-closing. Ensure they close completely after each use to maintain temperature and energy efficiency.
• Undgå at lade døre stå åbne i længere tid.

6. Vedligeholdelse

6.1 Rengøring af indersiden

• Afbryd strømmen før rengøring.
• Use a mild soap and warm water solution to clean interior surfaces. Avoid abrasive cleaners.
• Wipe down shelves and interior walls regularly.
• Skyl med rent vand og tør grundigt.

6.2 Rengøring af ydersiden

• Tør de udvendige overflader af med en blød klud og et mildt rengøringsmiddel.
• Clean glass doors with a non-abrasive glass cleaner.

6.3 Rengøring af kondensatorspole

• The condenser coil is located at the bottom of the unit and should be cleaned regularly (monthly or quarterly, depending on environment).
• Afbryd strømmen.
• Fjern frontgitteret.
• Use a stiff brush or vacuum cleaner to remove dust and debris from the condenser fins.
• Replace the front grille and reconnect power.
• Note: A dirty condenser coil reduces efficiency and can lead to compressor failure.

6.4 Vedligeholdelse af pakninger

• Inspect door gaskets regularly for tears or damage.
• Clean gaskets with warm water and mild soap to maintain their sealing properties.

7. Fejlfinding

Før du kontakter service,view følgende almindelige problemer og løsninger:

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or service inquiries, please contact True Manufacturing directly or refer to the official True webwebsted. Hav din købskvittering og modelnummer ved hånden, når du kontakter support.

Fabrikant: True Manufacturing

Model: GDM-72F-HC~TSL01