1. Introduktion
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Generelle sikkerhedsinstruktioner
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
- Elektrisk sikkerhed: Undgå kropskontakt med jordede eller jordede overflader såsom rør, radiatorer, komfurer og køleskabe. Der er en øget risiko for elektrisk stød, hvis din krop er jordet eller jordet.
- Personlig sikkerhed: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til dit formål. Det vil udføre arbejdet bedre og mere sikkert med den hastighed, det er designet til. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
- Brug og pleje af batteripakken: Genoplad kun med den oplader, der er specificeret af producenten. En oplader, der er egnet til én type batteripakke, kan skabe brandrisiko, når den bruges sammen med en anden batteripakke. Brug kun elværktøj med specielt beregnede batteripakker.
3. Produktet er slutview og funktioner
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Højt drejningsmoment output: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Variabel hastighedskontrol: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Integreret LED belysning: Three power LEDs provide optimal illumination of the work area.
- Ergonomisk design: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Holdbar konstruktion: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Bælteklips: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Opsætning
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- For at fjerne batteriet skal du trykke på udløserknappen(e) på siderne af batteripakken og skubbe den ud.
4.2 Bitindsættelse og -fjernelse
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Betjeningsvejledning
5.1 Tænd/sluk og hastighedskontrol
- At begynde: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Hastighedstilpasning: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- At stoppe: Slip ON/OFF-knappen.
5.2 Rotationsretning
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Fremadrotation (indskruning): Push the selector switch to the left.
- Omvendt rotation (udskruning): Push the selector switch to the right.
- Låseposition: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din slagskruetrækkers levetid og optimale ydeevne.
- Rensning: Rengør værktøjshuset med en blød klud efter hver brug.amp klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler. Sørg for, at ventilationsåbningerne er fri for støv og snavs.
- Opbevaring: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Inspektion: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet starter ikke. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Reduceret effekt eller ydeevne. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Bitten sidder ikke sikkert fast. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Einhell |
| Modelnummer | TE-CI 18/1 Li Solo (4510034) |
| Strømkilde | Batteridrevet (18V Power X-Change) |
| Maksimal rotationshastighed | 2300 RPM |
| Maksimalt drejningsmoment | 140 Newtonmeter |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 volt |
| Varens vægt | 1.18 kilo (2.58 pund) |
| Produktdimensioner | 7.8 cm L x 3.03 cm B x 6.65 cm H |
| Materiale | Rubber, Aluminium |
| Inkluderede komponenter | Akku-Schlagschrauber (Impact Driver Body Only) |
| Batterier inkluderet? | Ingen |
| Batterier påkrævet? | Yes (18V Lithium Ion) |
9. Garanti og support
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webwebsted.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
