Douk Audio Little Bear T7 Vakuumrør Phono Preamplivligere brugervejledning

1. Introduktion

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Douk Audio Little Bear T7 Vacuum Tube Phono PreampLæs venligst denne manual grundigt, inden du bruger enheden, for at sikre optimal ydeevne og levetid.

2. Produktet er slutview

The Douk Audio Little Bear T7 is a versatile audio component designed to function as both an MM (Moving Magnet) Turntable Preamplifier and a Hi-Fi Tube Pre-Amplifier. It incorporates 6J1 vacuum tubes to deliver a warm, rich audio signature, enhancing the listening experience for record players and other audio sources. Its compact design and robust aluminum chassis make it suitable for various home audio setups.

Billede 2.1: Forside view of the Little Bear T7 Preampløfter, showcasing the vacuum tubes and controls.

3. Funktioner

• Functions as an MM Turntable Preamp or a Hi-Fi Tube Pre-Amplivligere.
• Utilizes 6J1 vacuum tubes for a vintage warm sound. Tubes are replaceable with compatible types such as GE5654, 6AK5, EF95.
• Compact size for portability and integration into various audio environments.
• Durable aluminum body construction.
• External gain switch for convenient adjustment (35dB/40dB).
• Optimized circuit design for reduced noise levels.

4. Pakkens indhold

• 1 x Douk Audio Little Bear T7 Preamplivligere
• 1 x Power Supply (AC12~18V)
• 2 x 6J1 Tubes

5. Specifikationer

6. Opsætningsvejledning

6.1. Tube Installation

1. Carefully unpack the two 6J1 vacuum tubes from their protective packaging.
2. Align the pins of each tube with the corresponding holes in the tube sockets on the top of the preamplifier. Ensure the keyway on the tube base aligns with the slot in the socket.
3. Gently but firmly push each tube straight down into its socket until it is fully seated. Avoid twisting or forcing the tubes.

Billede 6.1: Nærbillede view of the tube sockets and the gain switch on the Little Bear T7.

6.2. Tilslutning af dine enheder

Refer to the rear panel image below for connection points.

Image 6.2: Rear panel connections of the Little Bear T7 Preamplivligere.

1. Jordforbindelse: Connect the ground wire from your turntable to the GND jack on the rear of the T7. This connection is crucial for minimizing background noise. To connect, press the ground clamp, insert the ground wire, and release the clamp.
2. Phono input: Connect the RCA output cables from your MM turntable to the 'PHONO IN' (L/R) jacks on the rear of the T7. Ensure left (white) and right (red) channels are correctly matched.
3. AUX-indgang: If using the T7 as a general Hi-Fi pre-amplifier for a non-turntable source (e.g., CD player), connect its RCA output to the 'AUX IN' (L/R) jacks on the rear.
4. Linjeoutput: Connect the 'LINE OUT' (L/R) jacks of the T7 to an available line-level input on your stereo amplifier, active speakers, or receiver. Do not connect to a phono input on your amplifier/receiver, as this will result in over-ampforvrængning og forvrængning.
5. Strømtilslutning: Connect the provided AC power adapter to the 'AC IN' port on the rear of the T7, then plug the adapter into a suitable wall outlet.

6.3. Forstærkningsindstilling

The T7 features an external gain switch located between the tubes on the top panel. This switch allows you to select between 35dB and 40dB gain settings for the phono input. Adjust this setting based on your turntable's output and your desired volume level. Start with 35dB and switch to 40dB if more volume is needed, ensuring no distortion occurs.

6.4. Placeringsovervejelser

For optimal performance and to minimize interference, place the Little Bear T7 away from devices that emit strong electromagnetic signals, such as cell phones, Wi-Fi routers, and power transformers.

7. Betjeningsvejledning

7.1. Tænd/sluk

Locate the 'ON/OFF' toggle switch on the front panel of the unit. Flip the switch to 'ON' to power on the preamplifier. The tubes will begin to glow. Flip the switch to 'OFF' to power down the unit.

7.2. Valg af input

The T7 has a toggle switch on the front panel to select between 'AUX IN' and 'PHONO IN'. Ensure this switch is set to the correct input corresponding to your active audio source.

7.3. Afspilning af lyd

1. Ensure all connections are secure and the unit is powered on.
2. Select the appropriate input ('AUX' or 'PHONO') on the T7.
3. Begin playback from your audio source (e.g., start your turntable).
4. Juster lydstyrken på din tilsluttede amplifier, receiver, or active speakers. The T7 is a preamplifier and does not have its own volume control.

Allow a few minutes for the vacuum tubes to warm up for optimal sound quality. You may notice a slight change in sound as the tubes reach their operating temperature.

8. Vedligeholdelse

8.1. Rensning

To clean the unit, power it off and disconnect it from the power source. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners or abrasive materials, as these can damage the finish or internal components.

8.2. Udskiftning af rør

The 6J1 vacuum tubes have a finite lifespan. If you notice a degradation in sound quality or if a tube fails, they can be replaced. Compatible tube types include GE5654, 6AK5, and EF95. Ensure the unit is powered off and unplugged before attempting to replace tubes. Carefully pull the old tubes straight out of their sockets and insert the new tubes as described in Section 6.1.

9. Fejlfinding

• Ingen lyd:
  • Kontrollér alle kabelforbindelser (indgang, udgang, strøm).
  • Sørg for, at T7 er tændt, og at rørene lyser.
  • Verify the input selector switch on the T7 is set to the correct source (PHONO or AUX).
  • Bekræft din amplifier/receiver is set to the correct input connected to the T7.
  • Kontroller lydstyrkeniveauet på din amplifier/modtager.
• Excessive Background Noise/Hum:
  • Ensure the turntable's ground wire is securely connected to the T7's GND jack.
  • Move the T7 away from other electronic devices that may cause interference (e.g., cell phones, Wi-Fi routers, power supplies).
  • Check for loose or faulty RCA cables.
  • If using an old MM cartridge, consider upgrading to a newer version, as some older cartridges may contribute to higher noise levels.
• Forvrænget lyd:
  • Ensure the gain setting (35dB or 40dB) is appropriate for your turntable's output. If the sound is distorted at 40dB, try switching to 35dB.
  • Verify that the T7's output is connected to a line-level input on your amplifier/receiver, not another phono input.
  • Check the condition of your turntable's stylus and cartridge.
• Rørene gløder ikke:
  • Ensure the unit is powered on and the power adapter is securely connected and receiving power.
  • Check if the tubes are properly seated in their sockets.
  • If tubes are old, they may need replacement.

10. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle Douk Audio-side. webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.