Brugermanual til Atlantic Vertigo Access 100 elektrisk vandvarmer

1. Introduktion

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Atlantic Vertigo Access 100 electric water heater. Please read these instructions carefully before installation and use, and keep them for future reference. This appliance is designed for domestic hot water production.

The Atlantic Vertigo Access 100 features an ultra-flat design, allowing for versatile multi-position installation (vertical or horizontal). It incorporates an intelligent control system for energy saving and consumption monitoring, an electronic thermostat, high-density CFC-free insulation, magnesium anode protection, and Diamond Quality enamel for durability.

2. Sikkerhedsinstruktioner

Vigtig: Installation, maintenance, and repair must be performed by qualified personnel in accordance with local regulations and standards. Failure to comply with these instructions may result in electric shock, fire, property damage, or personal injury.

• Ensure the electrical supply matches the specifications on the appliance label.
• Afbryd altid strømmen, før du udfører vedligeholdelse eller service.
• Brug ikke vandvarmeren, hvis den er beskadiget eller ikke fungerer korrekt.
• Install a safety valve as required by local plumbing codes to prevent excessive pressure.
• Hold brændbare materialer væk fra apparatet.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de er blevet under opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed. .

3. Opsætning og installation

The Atlantic Vertigo Access 100 is designed for flexible installation, supporting both vertical and horizontal orientations. Its ultra-flat profile (less than 30 cm depth) allows for discreet integration into various spaces. Easy installation is facilitated by included wall brackets and a mounting template.

3.1. Multi-Position Installation

The water heater can be installed vertically or horizontally. Refer to the diagrams below for specific dimensions and mounting points for each orientation. Ensure adequate clearance for maintenance and proper ventilation.

Billedbeskrivelse: An illustration demonstrating the Atlantic Vertigo Access 100 electric water heater's ability to be installed either vertically or horizontally. The image shows the same unit rotated, highlighting its adaptable design.

3.2. Dimensioner og montering

Use the provided mounting template and wall brackets for secure installation. The following diagram illustrates the dimensions and connection points for both vertical and horizontal setups.

Billedbeskrivelse: A technical drawing providing precise measurements and connection points for the Atlantic Vertigo Access 100 water heater. It includes separate diagrams for vertical and horizontal installation, detailing height, width, depth, and pipe connections.

4. Betjeningsvejledning

The water heater is equipped with an electronic thermostat and an intelligent control system to optimize energy consumption and provide hot water efficiently.

Billedbeskrivelse: En front view of the Atlantic Vertigo Access 100 electric water heater, showcasing its sleek white casing and the integrated control panel at the bottom, which includes a rotary knob for temperature adjustment.

4.1. Temperaturkontrol

Adjust the desired water temperature using the electronic thermostat knob located on the front panel. Turning the knob clockwise typically increases the temperature, while counter-clockwise decreases it. Refer to the markings on the control panel for specific temperature ranges or modes.

4.2. Intelligent Control and Energy Saving

The intelligent control system learns your hot water usage patterns to optimize heating cycles, reducing energy consumption. This feature automatically adjusts the heating schedule to ensure hot water is available when needed, while minimizing standby losses.

5. Vedligeholdelse

Regular maintenance ensures the longevity and efficient operation of your water heater. Always disconnect the power supply before performing any maintenance.

5.1. Anode Inspection and Replacement

The water heater is equipped with a magnesium anode for protection against corrosion. This anode should be inspected periodically (e.g., annually) and replaced as necessary by a qualified technician. The inspection flange allows access to internal components.

Billedbeskrivelse: A cutaway diagram of the Atlantic Vertigo Access 100 water heater, revealing its internal structure. It clearly shows the dual tanks, heating elements, and the placement of the magnesium anode for corrosion protection.

5.2. Sikkerhedsventil

Periodically check the safety valve for proper operation. Follow the manufacturer's instructions for testing the valve to ensure it releases pressure correctly. Do not block or tamper med sikkerhedsventilen.

5.3. Rensning

Rengør vandvarmerens yderside med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.

6. Fejlfinding

If you experience issues with your water heater, consult the following common troubleshooting steps. For complex problems, contact a qualified technician.

• Intet varmt vand: Check the power supply, circuit breaker, and ensure the thermostat is set correctly.
• Utilstrækkeligt varmt vand: Verify the thermostat setting. If usage has increased, the intelligent control system may need time to adapt, or the capacity might be insufficient for current demand.
• Lækker: Immediately turn off the water supply and power. Leaks can indicate a faulty connection, a damaged tank, or a malfunctioning safety valve. Contact a professional.
• Usædvanlige lyde: Banging or popping sounds may indicate sediment buildup in the tank. Flushing the tank may resolve this, but professional assistance is recommended.

7. Specifikationer

For detailed product information and energy label data, please refer to the EPREL database:

EPREL Product Information (ID: 116212)

8. Garanti og support

This product comes with an Official Italy Warranty. For warranty claims, technical support, or spare parts inquiries, please contact Atlantic's after-sales service.

Kontaktoplysninger:

• Leverandør: ATLANTIC SOC FRANCAISE DEVELOP THERMIQUE
• After-sales service name: International Pre-Sales Service
• E-mail: masterdatarticle@groupe-atlantic.com
• Telefon: +33 (0)1 85 32 00 14
• Adresse: ARCUEIL