Futaba 6L Sport 2.4GHz R3106GF TFHSS Mono RC Air System Radio Transmitter User Manual

1. Introduktion

This manual provides essential instructions for the safe and effective operation of your Futaba 6L Sport 2.4GHz R3106GF TFHSS Mono RC Air System Radio Transmitter. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance of your equipment. This system is designed for remote control aircraft applications.

2. Produktet er slutview

2.1 Nøglefunktioner

• Futaba's T-FHSS Mono Directional 6-channel Air system.
• Includes R3106GF high voltage receiver with failsafe functionality.
• Integrated full-range antenna for a streamlined design.
• Supports V-Tail, elevon, and flaperon mixing.
• Features a 2-position switch and a rotary dial for auxiliary functions.
• Servo reversing capability.
• Low battery alarm for safety.
• Buddy box capabilities for training.
• Range check function.
• Configurable for Mode 1 or Mode 2 operation.

2.2 Pakkens indhold

• Futaba 6L Sport 6-Channel T-FHSS Air Radio System Transmitter
• R3106GF modtager
• Instruktionsmanual (dette dokument)

2.3 Items Required (Not Included)

• AA Batteries: Four for transmitter power.
• Servos: As required by the pilot's aircraft choice.

Image 1: The Futaba 6L Sport 2.4GHz Radio Transmitter, showcasing its ergonomic design and control sticks.

3. Opsætning

3.1 Installation af senderbatteri

1. Åbn batterirummets dæksel på bagsiden af ​​senderen.
2. Isæt fire AA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet i batterirummet.
3. Luk batterirummets dæksel forsvarligt.

3.2 Receiver Connection (R3106GF)

1. Connect your servos to the corresponding channels on the R3106GF receiver. Refer to your aircraft's manual for specific servo assignments.
2. Connect the power source (e.g., battery pack or ESC with regulated output) to the receiver's power input. Ensure the power requirement of 4.8-7.4V is met.
3. Mount the receiver securely within your aircraft, ensuring the antenna is positioned for optimal signal reception.

Image 2: The Futaba 6L Sport Transmitter shown alongside the compact R3106GF Receiver, illustrating their relative sizes.

3.3 Binding (Linking) the Transmitter and Receiver

The transmitter and receiver must be linked (bound) to establish communication. Follow the instructions provided with your R3106GF receiver for the specific binding procedure. Generally, this involves powering on the receiver in binding mode and then powering on the transmitter while holding a specific button or sequence.

Billede 3: Et nærbillede view of the DIP switches, which may be used for specific configuration settings or binding procedures depending on the model and receiver.

4. Betjeningsvejledning

4.1 Grundlæggende kontroller

• Kontrolpinde: The primary control sticks operate the aircraft's main flight surfaces (aileron, elevator, rudder, throttle). The specific function of each stick depends on whether the transmitter is set to Mode 1 or Mode 2.
• Afbryderen: Located on the front panel, used to turn the transmitter ON or OFF.
• Skærm LED: Indicates transmitter status, including power and low battery warnings.

4.2 Auxiliary Controls

• 2-positionskontakt: This switch can be assigned to control functions such as landing gear, flaps (two positions), or other on/off auxiliary functions.
• Drejeskive: Provides variable control for functions like flaps (proportional control), gyros, or other auxiliary channels requiring fine adjustment.

Image 4: A close-up of one of the 2-position switches on the transmitter, used for activating or deactivating specific aircraft functions.

Image 5: A close-up of a rotary dial on the transmitter, providing proportional control for auxiliary channels.

4.3 Mixing Functions

The 6L Sport transmitter includes pre-programmed mixing functions to simplify control for certain aircraft types:

• V-Tail Mixing: Combines elevator and rudder control for aircraft with V-tail configurations.
• Elevon Mixing: Combines elevator and aileron control for delta wing or flying wing aircraft.
• Flaperon Mixing: Allows ailerons to function as both ailerons and flaps.

Refer to the detailed instructions within the full product manual for how to activate and configure these mixing functions.

4.4 Servo Reversing

If a servo operates in the incorrect direction, its travel can be reversed using the servo reversing function. Consult the full product manual for the procedure to reverse servo direction for each channel.

5. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre senderen og modtageren. Undgå at bruge opløsningsmidler eller slibende rengøringsmidler.
• Opbevaring: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if it will not be used for an extended period.
• Batteripleje: Always use fresh batteries. Do not mix old and new batteries or different types of batteries. Dispose of used batteries responsibly.
• Inspektion: Periodically inspect all cables, connectors, and the antenna for any signs of damage or wear.

6. Fejlfinding

• Ingen strøm: Ensure batteries are correctly installed with proper polarity and are fully charged. Check the power switch position.
• Alarm for lavt batteri: If the low battery alarm sounds, immediately land your aircraft and replace the transmitter batteries. Do not continue flying with low battery power.
• Loss of Control/Range Issues: Perform a range check before each flight session. Ensure the receiver antenna is not obstructed or damaged. Verify the transmitter and receiver are properly bound. Avoid operating near sources of strong radio interference.
• Forkert servobevægelse: Check servo reversing settings. Ensure servos are connected to the correct channels on the receiver.

7. Specifikationer

7.1 T6L Sport Transmitter

• Type: 2-stick, 6-channel, T-FHSS Air (Mono Directional) 2.4GHz system
• Sendefrekvens: 2.4 GHz
• System: T-FHSS Air (Mono Directional), no telemetry
• Strømforsyning: 6.0V dry battery (4 x AA)
• Varemodelnummer: FUTK5000
• Produktdimensioner: 10.25 x 10.13 x 4.63 tommer
• Varens vægt: 2 pund

7.2 R3106GF Receiver

• Type: T-FHSS Air (Mono Directional) 2.4GHz system, no telemetry
• Strømbehov: 4.8-7.4V battery, or regulated output from ESC*
• Dimensioner: 1.7 x 0.98 x 0.35 inches (43.1 x 25.0 x 8.8 millimeters)
• Vægt: 0.3 ounce (7.8 gram)

*When using ESC, ensure that regulated output capacity meets usage application.

8. Garanti og support

For garantioplysninger, teknisk support eller serviceforespørgsler henvises til den officielle Futaba-side. website or contact your authorized Futaba dealer. Keep your proof of purchase for warranty claims.