1. Introduktion
The Meliconi AT55 is an amplified indoor TV antenna designed for optimal reception of digital terrestrial television (DVB-T), high-definition DVB-T (DVB-T HD), and digital radio (DAB+) signals. This antenna is equipped with special filters to minimize interference from 4G and 5G signals and is prepared for DVB-T2 HEVC reception. Its advanced internal amplification circuit ensures a low noise figure of less than 1 dB, contributing to clear signal quality.
This manual provides essential information for the correct installation, operation, and maintenance of your Meliconi AT55 antenna.
2. Sikkerhedsoplysninger
- Læs alle instruktioner før brug, og gem dem til fremtidig reference.
- Do not expose the antenna to rain or moisture.
- Sørg for, at strømforsyningen voltage matches the requirements specified on the adapter.
- Disconnect the power adapter during lightning storms or when unused for extended periods.
- Do not attempt to open or modify the antenna. Refer all servicing to qualified personnel.
- Keep the antenna away from heat sources and direct sunlight.
- Place the antenna on a stable, flat surface to prevent it from falling.
3. Pakkens indhold
Bekræft, at alle følgende varer er inkluderet i din pakke:
- Meliconi AT55 Amplified Indendørs TV-antenne
- AC/DC Power Adapter (230V)
- USB Power Cable (5V)
- Instruktionsmanual
4. Opsætning
Follow these steps to set up your Meliconi AT55 antenna:
- Antenneplacering: Position the antenna in an optimal location, ideally near a window and away from large metal objects or other electronic devices that could cause interference. Experiment with different positions to find the best signal reception.
- Connect to TV/Decoder: Connect the antenna's coaxial cable to the 'Antenna In' or 'RF In' port on your television or digital terrestrial decoder.
- Strømtilslutning: The antenna can be powered in two ways:
- Via AC Adapter: Connect the included AC/DC power adapter to the antenna's power input port and then plug the adapter into a standard wall outlet.
- Via USB: Connect the included USB power cable to the antenna's USB input port. Then, connect the other end of the USB cable to a free USB port on your TV or decoder (if compatible and provides 5V power).
- Kanalscanning: Access the menu on your TV or decoder and perform an automatic channel scan. Refer to your TV or decoder's manual for specific instructions on how to do this.
Billede 1: Bag view of the Meliconi AT55 antenna, illustrating the power input and coaxial cable connection points. The antenna features a curved black design with a sturdy base.
Billede 2: Front view of the Meliconi AT55 antenna, showcasing its sleek, curved black design. The Meliconi logo is subtly visible on the lower left portion of the antenna's face.
5. Betjeningsvejledning
Once the antenna is set up and channels are scanned, operation is straightforward:
- Kanalvalg: Use your TV or decoder remote control to select desired channels.
- Signal Optimization: If you experience poor signal quality on certain channels, try slightly adjusting the antenna's position or orientation. Perform another channel scan after significant adjustments.
- Strømindikator: The antenna typically features an LED indicator to confirm it is receiving power.
6. Vedligeholdelse
The Meliconi AT55 antenna requires minimal maintenance:
- Rensning: Wipe the antenna with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Opbevaring: If storing the antenna for an extended period, disconnect it from power and store it in a cool, dry place.
7. Fejlfinding
If you encounter issues with your antenna, refer to the following troubleshooting guide:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet signal eller dårlig billedkvalitet |
|
|
| Interference from mobile signals (4G/5G) | Antenna is designed with built-in filters. | The AT55 includes integrated 4G and 5G interference filters. Ensure the antenna is powered correctly for the amplifier and filters to function optimally. |
| Antennen tændes ikke |
|
|
8. Specifikationer
- Mærke: Meliconi
- Modelnummer: 881016
- Produkttype: Amplified Indendørs TV-antenne
- Farve: Sort
- Kompatibilitet: DVB-T, DVB-T HD, DVB-T2 HEVC, DAB+ radio
- Frekvensområde: VHF (174 ~ 230 MHz), UHF (470 ~ 694 MHz)
- Interference Filters: 4G, 5G
- Støjfigur: <1 dB
- Maksimal rækkevidde: Op til 30 km fra repeater
- Strømforsyning: AC/DC Adapter (230V) or USB (5V)
- Dimensioner (L x B x H): 27.5 cm x 5.5 cm x 13.1 cm
- Compatible TV Brands: Samsung, LG, Sony, Philips, Panasonic, United, Telefunken, Hitachi, Haier, OK, Kennex, Toshiba, Sharp, Thomson
9. Garanti og support
Meliconi products are manufactured to high-quality standards and come with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact Meliconi customer support.
For technical assistance or support, please contact Meliconi directly:
- E-mail: info@meliconi.com
- Telefon: +39 051 68211
Billede 3: Meliconi technical support contact details, including email address and phone number, for customer assistance.
