1. Introduktion
This manual provides essential information for the installation, operation, and maintenance of your Transcend MTS400S M.2 2242 SATA III Solid State Drive. The MTS400S is designed for high-performance computing in compact form factors, such as Ultrabooks and thin notebooks.
Pakkeindhold:
- Transcend MTS400S M.2 SSD
- Garantikort
Nøglefunktioner:
- Space-saving M.2 Type 2242 form factor
- SATA III 6Gb/s interface
- MLC NAND flash memory for enhanced durability
- DDR3 DRAM cache for improved performance
- Supports DevSleep ultra-low power state
- Supports S.M.A.R.T., TRIM, and NCQ commands
2. Opsætning og installation
The Transcend MTS400S SSD is an internal component. Installation requires opening your computer case or laptop. If you are unfamiliar with hardware installation, it is recommended to seek assistance from a qualified technician.
Kompatibilitetskontrol:
Ensure your device has an available M.2 slot that supports the 2242 form factor and SATA III interface. Refer to your device's motherboard or laptop manual for specific M.2 slot details.
Installationstrin:
- Forberedelse: Power off your computer and disconnect all cables. Open the computer case or laptop cover. It is advisable to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
- Find M.2-slot: Identificér M.2-slottet på dit bundkort. Det har typisk en lille skrueholder i nærheden.
- Indsæt SSD: Gently insert the Transcend MTS400S SSD into the M.2 slot at a slight angle. The gold contacts should slide fully into the slot.
- Sikker SSD: Once fully seated, push the SSD down towards the motherboard and secure it with the small screw provided with your motherboard or device.
- Saml igen: Close your computer case or laptop cover and reconnect all cables.
Image: The Transcend MTS400S M.2 SSD shown installed in a compatible M.2 slot within a laptop, demonstrating its compact size and proper seating.
Initial Setup (for New SSDs):
After physical installation, you may need to initialize and format the SSD in your operating system before it can be used.
- Windows: Open 'Disk Management' (right-click 'This PC' or 'My Computer' > 'Manage' > 'Disk Management'). Locate the new SSD, initialize it (MBR or GPT, typically GPT for modern systems), and then create a new simple volume.
- MacOS: Use 'Disk Utility' to erase and format the drive.
- Linux: Use tools like GParted or fdisk/mkfs to partition and format the drive.
3. Betjening af SSD'en
The Transcend MTS400S SSD functions as a standard storage device. It can be used as a primary boot drive for your operating system or as a secondary drive for data storage.
Optimering af ydeevne:
- TRIM-kommando: Ensure your operating system has TRIM enabled. TRIM helps maintain the performance and longevity of the SSD by allowing the OS to inform the SSD which data blocks are no longer in use and can be wiped internally. Most modern operating systems (Windows 7+, macOS 10.6.8+, Linux kernel 2.6.33+) enable TRIM by default for SSDs.
- DevSleep: The MTS400S supports DevSleep, an ultra-low power state that intelligently shuts down the SATA interface when not in use. This feature helps prolong your device's battery life in portable systems.
- AHCI-tilstand: For optimal performance, ensure your system's BIOS/UEFI is configured to use AHCI (Advanced Host Controller Interface) mode for the SATA controller, not IDE mode.
4. Vedligeholdelse
Proper maintenance can help ensure the longevity and optimal performance of your SSD.
- Regelmæssige sikkerhedskopier: While SSDs are generally reliable, it is crucial to regularly back up important data to another storage device.
- Firmwareopdateringer: Periodically check the Transcend website for any available firmware updates for your MTS400S SSD. Firmware updates can improve performance, stability, and compatibility.
- Transcend SSD Scope Software: Transcend offers a free software utility called SSD Scope. This tool can help monitor the health of your SSD, enable TRIM, securely erase data, and update firmware. It is recommended to download and utilize this software for comprehensive SSD management.
- Undgå defragmentering: Unlike traditional hard disk drives, SSDs do not benefit from defragmentation. Defragmenting an SSD can reduce its lifespan without improving performance.
5. Fejlfinding
If you encounter issues with your Transcend MTS400S SSD, refer to the following common problems and solutions:
SSD ikke fundet:
- Tjek fysisk forbindelse: Ensure the SSD is correctly seated in the M.2 slot and secured.
- BIOS/UEFI-indstillinger: Enter your system's BIOS/UEFI setup and verify that the M.2 slot is enabled and configured for SATA mode (not PCIe, if applicable).
- Disk Management (OS): For new SSDs, ensure it has been initialized and formatted in your operating system's disk management utility.
- Driver opdateringer: Sørg for, at SATA-controllerdriverne til dit bundkort er opdaterede.
Langsom ydeevne:
- TRIM-status: Verify that TRIM is enabled in your operating system.
- AHCI-tilstand: Confirm that your system's BIOS/UEFI is set to AHCI mode for the SATA controller.
- SSD Health: Use Transcend SSD Scope software to check the health and wear-leveling status of your SSD.
- Systemressourcer: Ensure your system has sufficient RAM and CPU resources, as these can impact overall storage performance.
6. Specifikationer
Detailed technical specifications for the Transcend MTS400S M.2 2242 SATA III SSD (Model: TS128GMTS400S).
Image: A table summarizing the technical specifications of the Transcend MTS400S SSD, including dimensions, weight, storage media, and performance metrics.
| Feature | Specifikation |
|---|---|
| Modelnummer | TS128GMTS400S |
| Formfaktor | M.2 2242 |
| Interface | SATA III 6Gb/s |
| Kapacitet | 128GB (Other capacities available: 32GB, 64GB, 256GB, 512GB) |
| Lagermedier | MLC NAND Flash |
| DRAM Cache | DDR3 |
| Sequential Read Speed (Max) | Op til 500 MB/s |
| Sequential Write Speed (Max) | Op til 450 MB/s |
| 4K Random Read (IOPS) | Op til 70,000 IOPS |
| 4K Random Write (IOPS) | Op til 40,000 IOPS |
| Mean Time Between Failures (MTBF) | 1,500,000 timer |
| Terabytes skrevet (TBW) | 300 TBW (for 128GB model) |
| Driftstemperatur | 0°C (32°F) ~ 70°C (158°F) |
| Operation Voltage | 3.3V ±5 % |
| Dimensioner (L x B x H) | 42.0 mm x 22.0 mm x 3.58 mm (1.65" x 0.87" x 0.14") |
| Vægt | 5 g (0.18 oz) |
| Certifikater | CE, FCC, UKCA, BSMI, KC, RCM |
Note: Speed may vary due to host hardware, software, usage, and storage capacity.
7. Garanti og support
Garantioplysninger:
The Transcend MTS400S SSD comes with a Tre års begrænset garanti. This warranty covers defects in materials and workmanship under normal use. Please refer to the included warranty card for full terms and conditions. The warranty does not apply if SSD Scope's wear-out indicator displays 0% within the warranty coverage period.
Teknisk support:
For technical assistance, troubleshooting, or warranty claims, please visit the official Transcend website or contact Transcend customer support. You can find contact information and support resources on their webwebsted.
