1. Introduktion
This instruction manual provides detailed information for the proper installation and use of your SmallRig Cold Shoe Mount Adapter (Model 2060). This adapter is designed to expand the mounting capabilities of your camera setup, allowing you to attach various accessories such as microphones, flashes, and LED lights to camera cages, handles, or plates.
2. Pakkens indhold
Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:
- 2 x SmallRig Cold Shoe Mount Adapters
- 2 x 1/4"-20 Screws
- 4 x M2.5 skruer
- 2 x Hex Spanners
Image 2.1: Contents of the SmallRig Cold Shoe Mount Adapter package, including two cold shoe mounts, various screws, and hex spanners.
3. Opsætning og installation
The SmallRig Cold Shoe Mount Adapter can be securely attached to any camera accessory featuring 1/4"-20 or M2.5 threaded holes.
3.1 Identifying Mounting Points
The cold shoe mount features both 1/4"-20 and M2.5 threaded holes on its base for attachment.
Billede 3.1: Bagside view of the cold shoe mount adapter, highlighting the 1/4"-20 and M2.5 threaded attachment points.
3.2 Attachment Procedure
- Identify the desired mounting location on your camera cage, handle, or plate. Ensure it has either a 1/4"-20 or M2.5 threaded hole.
- Align the corresponding threaded hole on the cold shoe mount with the mounting point on your accessory.
- Insert the appropriate screw (1/4"-20 or M2.5) and tighten it using the provided hex spanner until secure.
- Note: For most camera cages, including those compatible with Sony ZV-E10, a6500, a6300, a6700, the 1/4"-20 screw is typically used. The M2.5 screws are generally for specific SmallRig accessories or when additional stability is required. For SmallRig Full Cage 1661, only the 1/4"-20 screw is needed.
Image 3.2: Illustration of the cold shoe mount adapter being attached to a camera cage.
4. Betjeningsvejledning
Once the cold shoe mount adapter is securely installed, you can attach various accessories.
4.1 Montering af tilbehør
- Slide your accessory (e.g., microphone, flash, LED light) into the cold shoe slot.
- Ensure the accessory is fully seated. The cold shoe mount features two secure bending bevels on one end to prevent accidental removal.
- The white arrows on the surface indicate the recommended direction for sliding accessories for optimal security.
Image 4.1: Close-up of the cold shoe mount adapter, showing the anti-off bending bevels and white directional arrows for accessory mounting.
Billede 4.2: Eks.ample of the cold shoe mount adapter in use, supporting an external microphone on a camera rig.
4.2 Kompatibilitet
This cold shoe mount is compatible with a wide range of camera accessories that utilize a standard cold shoe connection. Examples inkluderer:
- Mikrofoner
- LED lys
- External Flashes
- Small monitors (with appropriate cold shoe adapter)
- Magic Arms (with cold shoe base)
- Cold Shoe Handles
Image 4.3: Visual representation of the cold shoe mount adapter's compatibility with different camera accessories such as cages, LED lights, magic arms, cold shoe handles, and monitor mounts.
5. Vedligeholdelse
To ensure the longevity and optimal performance of your SmallRig Cold Shoe Mount Adapter, follow these simple maintenance guidelines:
- Hold holderen ren og fri for støv og snavs. Brug en blød, tør klud til rengøring.
- Undgå at udsætte holderen for ekstreme temperaturer eller ætsende stoffer.
- Periodically check the tightness of the mounting screws to ensure a secure connection.
6. Fejlfinding
6.1 Accessory Not Fitting Securely
- Ensure the accessory has a standard cold shoe base.
- Verify that the accessory is slid fully into the mount, past the anti-off bevels.
- Some accessories may have a locking mechanism that needs to be tightened after insertion.
6.2 Mount Not Attaching to Camera Accessory
- Confirm that your camera accessory has 1/4"-20 or M2.5 threaded holes.
- Ensure you are using the correct screw size (1/4"-20 or M2.5) for the threaded hole.
- Tighten the screw firmly with the hex spanner.
6.3 Kompatibilitetsbegrænsninger
This Cold Shoe Mount is IKKE suitable for DJI gimbals and IKKE for ZHIYUN gimbals.
7. Specifikationer
| Model | 2060 |
| Materiale | Aluminiumslegering |
| Dimensioner (L x B x H) | 25 mm x 25 mm x 9 mm (0.98 "x 0.98" x 0.35 ") |
| Varens vægt (pr. stk.) | 0.317 ounces (ca. 9 g) |
| Monteringstype | 1/4"-20 Thread, M2.5 Thread |
| Kompatibilitet | Standard cold shoe accessories, camera cages with 1/4"-20 or M2.5 threads |
Image 7.1: The compact size of the SmallRig Cold Shoe Mount Adapter, shown held in a hand.
8. Garanti og support
For warranty information or technical support, please refer to the official SmallRig webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
Officiel SmallRig Webwebsted: www.smallrig.com
