Indledning
The Polk Audio HTS 12 Powered Subwoofer is designed to enhance your home theater and music listening experience with powerful, deep bass. Featuring a 12-inch long-throw Dynamic Balance driver, patented Power Port Technology, and a state-of-the-art 400W Class D amplifier, this subwoofer delivers immersive, three-dimensional sound with clarity.
Nøglefunktioner
- High Efficiency Sub-Woofer: Features a 12" front-firing long-throw woofer with Polk's proprietary Dynamic Balance Technology for immersive, three-dimensional sound in great clarity.
- Kraftig ydeevne: Delivers deep rumbling bass from the in-built 200-watt amplifier (400W at peak).
- Patented Power Port Technology: Ensures deeper bass response with a turbulence-smoothing diffuser, minimizing distortion and delivering rich, full-range sound.
- Universal Compatibility & Versatility: Equipped with LFE & stereo line-level inputs, compatible with Polk's Signature series 2-channel stereo speakers or a complete home theater setup.
- Convenient Rear Panel Controls: Easy access to controls for volume, low pass filter, and phase toggle (0 to 180 degree).
Hvad er der i æsken
- Subwoofer
- Strømledning
- Hurtig startvejledning
- Registreringskort
Opsætning
Udpakning
Carefully remove the subwoofer and all accessories from the packaging. Retain packaging for future transport or storage.
Placering
Optimal placement of your subwoofer can significantly impact sound quality. Experiment with different locations in your room. Generally, placing the subwoofer in a corner or along a wall can enhance bass output.
Image showing the Polk Audio HTS 12 subwoofer placed in a living room corner, demonstrating a typical placement option.
Forbindelser
The HTS 12 subwoofer offers LFE (Low-Frequency Effects) and stereo line-level RCA inputs for versatile connectivity.
LFE Connection (Recommended for AV Receivers)
Connect an RCA cable from the LFE output of your AV receiver to the LFE IN (unfiltered) input on the subwoofer.
Stereo Line-Level Connection
Connect RCA cables from the stereo pre-out outputs of your receiver/amplifier to the LINE IN (filtered) inputs on the subwoofer.
Strømtilslutning
Plug the included power cord into the subwoofer's power inlet and then into a suitable wall outlet.
Close-up image of the rear panel of the Polk Audio HTS 12 subwoofer, showing the various input connections and control knobs for volume, low pass filter, and phase.
Officiel videoshowasing the Polk HTS Series, including the HTS 12 subwoofer, highlighting its design and features. This video provides a visual overview af produktlinjen.
Betjening af subwooferen
Controls (Rear Panel)
All controls for volume, low pass filter, and phase toggle (0 to 180 degrees) are conveniently located on the rear panel of the subwoofer.
- Lydstyrkekontrol: Justerer subwooferens samlede udgangsniveau.
- Lavpasfilter (LPF): Sets the upper frequency limit for the subwoofer. This should be adjusted to blend seamlessly with your main speakers.
- Phase Toggle (0°/180°): Adjusts the phase of the subwoofer's output to match that of your main speakers, ensuring cohesive sound.
Indledende justering
Begin with the volume control at a low setting. Play audio with significant bass content. Gradually increase the volume until the bass blends naturally with your main speakers without overpowering them. Adjust the low pass filter and phase as needed for optimal integration.
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre kabinettet. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Placering: Ensure adequate ventilation around the subwoofer. Do not block the Power Port.
- Magt: Disconnect power during electrical storms or when unused for extended periods.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd | Power not connected, Volume too low, Incorrect input selected. | Check power cable, Increase volume, Verify input selection on subwoofer and receiver. |
| Forvrænget lyd | Volume too high, Incorrect LPF setting, Damaged cable. | Reduce volume, Adjust LPF, Check/replace audio cables. |
| Svag bas | Incorrect phase setting, Subwoofer placement, LPF too low. | Toggle phase (0°/180°), Adjust subwoofer position, Increase LPF setting. |
Specifikationer
Image illustrating the dimensions of the Polk Audio HTS 12 Subwoofer: 17.126" Wide (43.5 cm), 18.11" Deep (46 cm), 18.5" Tall (46.99 cm).
| Feature | Detalje |
|---|---|
| Mærke | Polk lyd |
| Modelnavn | HTS 12 |
| Højttaler type | Subwoofer |
| Højttaler størrelse | 12 tommer |
| Bashøjttaler diameter | 12 tommer |
| Højttaler Maksimal udgangseffekt | 400 watt |
| Frekvensrespons | 22 Hz - 180 Hz |
| Impedans | 8 Ohm |
| Forbindelsesteknologi | Kablet |
| Trådløs kommunikationsteknologi | Ingen trådløs kommunikationsteknologi |
| Strømkilde | DC strøm |
| Input bindtage | 12 volt |
| Kontrolmetode | Røre |
| Monteringstype | Hyldemontering |
| Materiale | Polypropylen |
| Farve | Sort valnød |
| Produktmål (D x B x H) | 18.11" D x 17.13" B x 18.5" H |
| Varens vægt | 60 pund |
| Vandmodstandsniveau | Ikke vandafvisende |
| Surround Sound Kanalkonfiguration | 2.0 |
| Anbefalet anvendelse af produktet | Musik, hjemmebiograf |
| Kompatible enheder | Hjemmebiograf |
| Inkluderede komponenter | Power Cord, Quick Start Guide, Registration Card, Subwoofer |
Garanti og support
This Polk Audio HTS 12 Powered Subwoofer comes with a Begrænset garanti. For detailed warranty information and support, please refer to the included Registration Card or visit the official Polk Audio webwebsted.
Official Polk Audio Store: Polk Audio Store
