Indledning
This manual provides detailed instructions for the Casio G-Shock GAS-100-1ACR Analog-Digital Watch. Please read this manual carefully to ensure proper use and to fully utilize all features of your watch. Keep this manual for future reference.
Figur 1: Casio G-Shock GAS-100-1ACR Watch. This image displays the front view of the watch, highlighting its analog and digital displays, buttons, and overall design.
Opsætning
Before using your watch, perform the following initial setup steps:
1. Oprindelig opkrævning
Your watch is equipped with Tough Solar Power, which converts light into energy. Ensure the watch is exposed to light regularly to maintain a sufficient charge. A power reserve indicator is available to monitor the charge level.
- Place the watch in a location where it can receive direct light, such as near a window.
- Avoid covering the watch face, as this is where the solar panel is located.
- A full charge can take several hours depending on light intensity.
2. Indstilling af tid og dato
The watch features both analog hands and digital displays. Time and date settings are typically synchronized, but may require manual adjustment.
- Tryk på MODE button to navigate through the different modes until you reach the Timekeeping Mode.
- Tryk og hold på TILPASSE button until the city code starts to flash, indicating the setting mode.
- Brug FORWARD og BAGSIDE knapperne til at vælge din bykode.
- Trykke MODE to cycle through other settings such as DST (Daylight Saving Time), 12/24-hour format, seconds, hour, minute, year, month, and day.
- Bruge FORWARD og BAGSIDE to change the values for each setting.
- Trykke TILPASSE to exit the setting mode. The analog hands will automatically adjust to the digital time.
3. World Time Configuration
The watch supports 31 time zones (48 cities + Coordinated Universal Time).
- In Timekeeping Mode, press MODE to enter World Time Mode.
- Brug FORWARD og BAGSIDE buttons to scroll through different city codes to view deres nuværende tider.
- To swap your Home City Time with World Time, refer to the detailed instructions in the full Casio module manual (available online).
4. Illumination Settings
The watch features a Double LED Light (Super Illuminator) for both the face and digital display.
- Manual Illumination: Press the dedicated light button (usually located at the 6 o'clock position) to illuminate the display.
- Auto LED Light: This feature automatically illuminates the display when you tilt your wrist towards your face in dim lighting conditions. This can be enabled or disabled in the settings.
- Belysningsvarighed: You can select between 1.5 or 3 seconds for the illumination duration in the settings.
Betjening af dit ur
Understand the various modes and functions of your G-Shock watch.
1. Tilstandsnavigation
Brug MODE button to cycle through the primary functions:
- Tidsvisningstilstand: Viser aktuel tid, dato og ugedag.
- Verdenstidstilstand: Shows current time in various cities around the globe.
- Stopurstilstand: Måler forløbet tid.
- Nedtællingstimertilstand: Tæller ned fra en forudindstillet tid.
- Alarmtilstand: Set and activate daily alarms and an hourly tidssignal.
2. Stopur-funktion
The watch includes a 1/100-second stopwatch.
- Naviger til stopurstilstand ved hjælp af MODE knap.
- Tryk på FORWARD knappen for at starte stopuret.
- Trykke FORWARD igen for at sætte på pause/genoptage.
- Tryk på TILPASSE knappen for at nulstille stopuret, mens det er på pause.
3. Alarm funktion
Indstil op til 5 daglige alarmer og en timerurly tidssignal.
- Naviger til alarmtilstand ved hjælp af MODE knap.
- Bruge FORWARD or BAGSIDE to select an alarm (AL1 to AL5) or the hourly-tidssignal (SIG).
- Tryk og hold TILPASSE to enter the alarm setting mode.
- Bruge MODE to switch between hour and minute settings, and FORWARD/BAGSIDE at ændre værdier.
- Trykke TILPASSE for at bekræfte og afslutte.
- To turn an alarm or the hourly time signal on/off, select it and press FORWARD.
Figur 2: Casio G-Shock GAS-100-1ACR Watch worn on a wrist. This image demonstrates the watch's size and fit on a typical user's arm.
Opretholdelse
Proper care ensures the longevity and performance of your Casio G-Shock watch.
1. Opladning
As a Tough Solar watch, regular exposure to light is crucial for maintaining its power. The watch uses a rechargeable Lithium Metal battery.
- Avoid prolonged storage in dark places.
- If the power reserve indicator shows a low charge, expose the watch to bright light for several hours.
- The watch has a power saving function that automatically enters a sleep state when left in the dark to conserve power.
2. Vandafvisende
The GAS-100-1ACR is 200M water resistant, suitable for swimming and diving.
- Betjen ikke knapperne, mens uret er nedsænket i vand.
- Efter udsættelse for saltvand, skyl uret med ferskvand og tør det af.
- Avoid exposing the watch to hot water or steam, as this can damage seals.
3. Rensning
Regular cleaning helps maintain the watch's appearance.
- Wipe the resin band and stainless steel case with a soft, dry cloth.
- For stubborn dirt, use a mild soap solution and a soft brush, then rinse thoroughly and dry.
- Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
Fejlfinding
Almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Watch display is blank or hands are not moving. | Lav batteriopladning. | Expose the watch face to bright light for several hours to charge the solar battery. Check the power reserve indicator. |
| Tidspunktet er forkert. | Incorrect home city setting, DST setting, or manual adjustment error. | Refer to the "Setting Time and Date" section to re-adjust time, date, and DST settings. Ensure your home city is correctly selected. |
| Illumination activates unexpectedly when wrist is tilted. | Auto LED Light feature is enabled. | This is a normal function. If undesired, disable the Auto LED Light feature in the watch settings. |
| Buttons are unresponsive or difficult to press. | Dirt or debris around buttons, or watch is submerged. | Clean around the buttons. Do not operate buttons underwater. If the issue persists, contact Casio support. |
Specifikationer
- Modelnummer: GAS-100-1ACR
- Kuffertdimensioner: Approximately 48mm (diameter) x 17mm (thickness)
- Crystal Diameter: Cirka 32 mm
- Vægt: 2.72 ounce (ca. 77 gram)
- Materiale til kasse/ramme: Harpiks / Rustfrit stål
- Båndmateriale: Harpiks
- Vandtæthed: 200 meter (20 BAR)
- Strømkilde: Tough Solar (Solar Powered, rechargeable Lithium Metal battery)
- Vise: Analog-Digital
- Stødmodstand: Ja
- Belysning: Double LED Light (Super Illuminator) for face and digital display, Full Auto LED Light, selectable illumination duration (1.5s/3s), afterglow.
- Verdenstid: 31 time zones (48 cities + UTC), daylight saving on/off.
- Stopur: 1/100-second, measuring capacity: 59'59.99'', measuring modes: elapsed time, split time, 1st-2nd place times.
- Nedtællingstimer: Measuring unit: 1 second, countdown range: 1 minute to 100 minutes (1-minute increments).
- Alarmer: 5 daily alarms, hourly tidssignal.
- Kalender: Full auto-calendar (to year 2099).
- Andre funktioner: 12/24-hour format, button operation tone on/off, battery level indicator, power saving function.
Figur 3: Watch size comparison chart. This graphic illustrates various watch case diameters in millimeters, providing a visual reference for the GAS-100-1ACR's size relative to other watches.
Garanti og support
Garantioplysninger
Warranty coverage for your Casio G-Shock watch is typically provided at the time of purchase. Please refer to the warranty card or documentation included with your product for specific terms, conditions, and duration. For warranty claims or service, retain your proof of purchase.
Kundesupport
For further assistance, technical support, or inquiries not covered in this manual, please contact Casio customer service directly. You can find contact information and additional resources on the official Casio webwebsted.
- Officiel Casio Webwebsted: www.casio.com
- Der henvises til website for regional support contacts and service centers.
Figur 4: G-Shock product packaging box. This image shows the exterior of the watch's retail packaging, typically containing the watch, manual, and warranty information.
