Indledning
This manual provides essential information for the safe and efficient operation of your Casper Adjustable Base. Please read all instructions carefully before assembly and use. This adjustable base is designed to provide customizable comfort by allowing you to elevate your head and feet, or both simultaneously. It is compatible with Casper mattresses and other flexible foam mattresses.
Image: The Casper Adjustable Base shown with both head and foot sections slightly elevated, demonstrating its adjustable capabilities.
Sikkerhedsoplysninger
- Always ensure the power cord is properly connected and not pinched.
- Hold børn og kæledyr væk fra bevægelige dele under drift.
- Do not operate the base if any parts are damaged or missing.
- Avoid placing hands or feet near the moving mechanisms.
- Sørg for, at basen er placeret på en flad, stabil overflade.
- Dette produkt er kun designet til indendørs brug.
Pakkens indhold
Før montering påbegyndes, skal du kontrollere, at alle komponenter er til stede:
- Adjustable Base Frame (main sections)
- Legs (quantity varies by size, typically 6-9)
- Trådløs fjernbetjening
- Strømledning og adapter
- Madrasholder
- Brugervejledning (dette dokument)
Opsætning og montering
Assembly typically requires two people due to the weight of the base. The base weighs approximately 113 pounds (Twin XL).
- Udpak komponenter: Carefully remove all parts from the packaging. Lay the main base sections upside down on a clean, flat surface to protect the fabric.
- Fastgør ben: Screw the legs into the designated threaded holes on the underside of the base. Ensure all legs are tightened securely. The base offers three different height options; adjust as desired.
- Tilslut strøm: Locate the power input on the underside of the base. Connect the power cord to the base and then plug it into a grounded electrical outlet.
- Flip the Base: With the assistance of another person, carefully flip the assembled base right-side up. Position it in your desired location.
- Installer madrasholderstang: Insert the mattress retainer bar into the designated slots at the foot of the base. This bar helps keep the mattress in place during adjustments.
- Isæt batterier i fjernbetjeningen: Open the battery compartment on the wireless remote control and insert the required batteries.
- Placemadras: Carefully place your Casper or compatible flexible foam mattress onto the adjustable base.
Image: The Casper Adjustable Base shown in its flat, unadjusted position, ready for mattress placement.
Betjeningsvejledning
Your Casper Adjustable Base is operated using the wireless remote control.
- Hoved op/ned: Use the designated buttons on the remote to raise or lower the head section of the base.
- Fod op/ned: Use the designated buttons to raise or lower the foot section of the base.
- Samtidig justering: The base allows for independent or simultaneous adjustment of the head and foot sections.
- Forudindstillede positioner: If your remote includes preset buttons (e.g., Zero Gravity, Flat), press them to automatically move the base to these positions.
Benefits of adjusting your sleep position:
- Inclining your upper body can help reduce snoring and alleviate indigestion.
- Lifting your lower body can improve circulation and ease back pain.
Image: The Casper Adjustable Base with the head section fully elevated, demonstrating a common comfort position.
Image: A Casper mattress on the adjustable base, with both the head and foot sections elevated, illustrating a relaxed, contoured position.
Opretholdelse
- Rensning: Tør basen af med annonceamp klud efter behov. Undgå skrappe kemikalier eller slibende rengøringsmidler.
- Inspektion: Kontrollér regelmæssigt alle forbindelser og fastgørelseselementer for at sikre, at de er fastgjort.
- Motorpleje: The motor is designed for maintenance-free operation. Do not attempt to lubricate or open the motor housing.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Basen fungerer ikke. | No power, remote batteries dead, remote not paired. | Check power cord connection. Replace remote batteries. Refer to remote pairing instructions (if applicable, usually in a separate guide or quick start). |
| Base makes unusual noises. | Loose connections, obstruction. | Ensure all legs and frame connections are tight. Check for any objects under the base that might be interfering with movement. |
| Remote control is lost or damaged. | Physical damage or misplacement. | Contact Casper customer support for replacement options. Note that replacement parts may require order information. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | BF00000028 |
| Størrelse | Twin XL |
| Produktdimensioner | 79 cm L x 37 cm B x 15 cm H |
| Varens vægt | 113 pund |
| Farve | Grå |
| Særlige funktioner | Adjustable, Flexible, Sturdy |
| Montering påkrævet | Ja |
| UPC | 637632722934 |
Garantioplysninger
For detailed warranty information regarding your Casper Adjustable Base, please refer to the warranty card included with your product or visit the official Casper website. Warranty terms typically cover manufacturing defects and specific components for a defined period.
Kundesupport
If you have any questions, require assistance with assembly, or need to order replacement parts, please contact Casper Customer Support:
- Online support: Visit the official Casper webwebsted for ofte stillede spørgsmål og supportressourcer.
- Telefonsupport: Refer to the contact information provided on the Casper webwebstedet eller din købsdokumentation.
- When contacting support, please have your model number (BF00000028) and purchase information readily available.
