Indledning
This instruction manual provides essential information for the proper setup, operation, and maintenance of your mDesign Steel Refillable Liquid Soap Dispenser Pump Bottles. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Two mDesign Hyde Collection bronze soap dispensers, showcasing their design and finish.
Pakkens indhold
- 2 x mDesign Steel Refillable Liquid Soap Dispenser Bottles
- 2 x Pump Mechanisms
Image: The product packaging indicating a two-pack of the bronze soap dispensers.
Opsætningsinstruktioner
- Pakker ud: Carefully remove the soap dispensers and pump mechanisms from their packaging.
- Forberedelse til fyldning: Unscrew the pump mechanism from the top of the dispenser bottle by turning it counter-clockwise.
- Fyld flasken: Pour your desired liquid soap, dish soap, hand sanitizer, or essential oil blend into the bottle. Do not overfill; leave some space at the top to accommodate the pump mechanism.
- Reattach Pump: Carefully reinsert the pump mechanism into the bottle opening and screw it clockwise until securely tightened.
- Forbered pumpen: Press the pump head several times until the liquid begins to dispense. This may require 5-10 presses for initial use.
Image: Illustrates the process of refilling the soap dispenser by pouring liquid into the open bottle.
Betjeningsvejledning
To dispense liquid, place your hand under the nozzle and press down firmly on the pump head. The pump is designed for smooth and consistent dispensing.
Image: A user demonstrating how to operate the soap dispenser by pressing the pump.
Opretholdelse
- Rengøring af ydersiden: Tør dispenserens yderside af med en blød kludamp cloth and mild soap. Avoid abrasive cleaners or scouring pads, as these can damage the finish.
- Rengøring af pumpen: If the pump becomes clogged or sticky, remove it from the bottle and rinse it thoroughly under warm water. You may need to pump warm water through the mechanism several times to clear any residue.
- Genopfyldning: Refill the dispenser as needed following the "Setup Instructions" above.
- Opbevaring: When not in use for extended periods, empty and clean the dispenser, then store it in a dry place.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pump not dispensing liquid. | Bottle is empty or pump is not primed. | Refill the bottle and/or prime the pump by pressing it repeatedly until liquid appears. |
| Pump is stiff or sticky. | Residue buildup in the pump mechanism. | Remove the pump and rinse thoroughly with warm water. Pump warm water through the mechanism to clear blockages. |
| Liquid leaks from around the pump. | Pump not securely tightened or damaged seal. | Ensure the pump mechanism is screwed on tightly. If leaking persists, inspect the seal for damage. |
Specifikationer
- Mærke: mDesign
- Modelnummer: 9429MDBA
- Materiale: Metal
- Farve: Bronze
- Product Dimensions (each): 2.6" L x 2.6" B x 8.25" H (6.6 cm L x 6.6 cm B x 21 cm H)
- Væskevolumen: 8 væskeouncer (ca. 236 ml)
- Varevægt (hver): 14.4 ounce (ca. 408 gram)
- Mængde: 2 tæller
- UPC: 841247194295
Image: A visual representation of the dispenser's dimensions, indicating a base diameter of 3.5 inches (8.9 cm) and a total height of 8.25 inches (21 cm).
Garanti og support
For garantioplysninger eller produktsupport henvises til producentens officielle webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til eventuelle garantikrav.
Fabrikant Webwebsted: mDesign Official Store
