Indledning
The Armor All Ultra Shine Protectant is designed to deliver a long-lasting, high-gloss shine while enhancing the deep, rich look of your vehicle's interior surfaces. This product is formulated with proprietary gloss enhancers to help prevent cracking, fading, discoloration, and premature aging caused by UV damage. It renews and revitalizes vinyl, rubber, and plastic components, providing an intense luster.
This manual provides detailed instructions for the proper use and care of your Armor All Ultra Shine Protectant to ensure optimal results and product longevity.
Vigtige sikkerhedsoplysninger
- Opbevares utilgængeligt for børn og kæledyr.
- Undgå kontakt med øjne og hud. Ved kontakt skylles grundigt med vand. Søg lægehjælp, hvis irritationen fortsætter.
- Må ikke indtages. Fremkald ikke opkastning ved indtagelse. Ring straks til en giftinformationscentral eller en læge.
- Anvendes i et godt ventileret område. Undgå langvarig indånding af dampe.
- Do not use on surfaces where slipperiness may be hazardous, such as vehicle controls (steering wheels, pedals), floor mats, or motorcycle seats.
- Not for use on glass, painted surfaces, or fabrics.
- Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, som staten Californien kender til at forårsage kræft og fosterskader eller anden reproduktionsskade.
Opsætning og forberedelse
Before applying the protectant, ensure the surface is clean and dry for best results.
- Rengør overfladen: Use an appropriate automotive interior cleaner to remove dirt, dust, and grime from the vinyl, rubber, or plastic surfaces you intend to treat.
- Dry the Surface: Allow the cleaned surface to dry completely before applying the protectant.
- Shake Bottle: Shake the Armor All Ultra Shine Protectant bottle well before each use to ensure proper mixture of ingredients.
Image: A single bottle of Armor All Ultra Shine Protectant, highlighting its "High Shine" characteristic. This image illustrates the product packaging.
Brugsanvisning (applikation)
Follow these steps for effective application of Armor All Ultra Shine Protectant:
- Spray Product: Spray the product directly onto the desired surface, or for more controlled application, spray onto a clean microfiber cloth.
- Wipe Evenly: Spread the protectant evenly over the surface using a clean cloth or sponge.
- Allow to Penetrate: Allow the product to penetrate for a few minutes.
- Wipe Off Excess: Wipe off any excess product with a clean, dry cloth to achieve a brilliant, non-greasy shine.
- Gentag om nødvendigt: For a deeper shine or heavily faded surfaces, repeat the application process.
Image: A person's hand using a microfiber cloth to apply Armor All Ultra Shine Protectant to a car's dashboard. This demonstrates the application process.
Image: A bottle of Armor All Ultra Shine Protectant placed on a car seat, with text highlighting its "Non-greasy formula." This image reinforces a key product benefit.
Vedligeholdelse og opbevaring
- Regular Application: For continuous protection against UV damage and to maintain a high-gloss finish, apply the protectant regularly as part of your vehicle care routine.
- Opbevaring: Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly closed to prevent leakage or evaporation.
- Bortskaffelse: Dispose of empty containers according to local regulations.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Streaking or uneven finish | Excess product applied; surface not clean; product not wiped evenly. | Ensure surface is clean and dry before application. Apply a thin, even coat. Wipe off all excess product thoroughly with a clean, dry microfiber cloth. |
| Dull finish after application | Not enough product applied; surface not adequately cleaned; product not allowed to penetrate. | Ensure surface is thoroughly cleaned. Apply a slightly more generous amount and allow it to penetrate for a few minutes before wiping. Repeat application if necessary. |
| Product residue on unintended surfaces | Overspray during application. | Spray product onto a cloth first, then apply to the desired surface to prevent overspray. Immediately wipe off any unintended residue with a damp klæde. |
Produktspecifikationer
| Feature | Detalje |
|---|---|
| Mærke | Rustning Alle |
| Modelnummer | 18706 |
| Vareformular | Flydende spray |
| Duft | Oparfumeret |
| Specifikke anvendelser | Car interior surfaces (vinyl, rubber, plastic) |
| Pakkedimensioner | 10.87 x 8.19 x 2.01 tommer |
| Varens vægt | 2.38 pund (for 2-pak) |
| ASIN | B075715XPJ |
Kontakt og support
For further assistance, product information, or safety data sheets, please visit the official Armor All webwebsted eller kontakt deres kundesupport.
Fabrikant: Rustning Alle
Webwebsted: www.armorall.com
