Calypso K5738/5 digitalt kvarts armbåndsur brugermanual

1. Introduktion

Thank you for choosing the Calypso K5738/5 Digital Quartz Wristwatch. This manual provides detailed instructions on how to set up, operate, and maintain your watch. Please read this manual carefully to ensure proper use and to fully utilize all features of your new timepiece.

2. Produktet er slutview

The Calypso K5738/5 features a clear digital display and four control buttons for easy navigation and setting of various functions.

This image displays the Calypso K5738/5 digital wristwatch. The watch features a turquoise case and strap, with a clear digital display showing the time and date. Four buttons are visible on the sides, typically used for mode selection, setting, light, and start/stop functions.

Knap funktioner:

• TILSTAND (nederst til venstre): Cycles through different modes: Time Display, Alarm Setting, Stopwatch.
• RESET (Top Left): Used to reset the stopwatch, or to select digits during time/date setting.
• ST/STP (Start/Stop) (Top Right): Used to start/stop the stopwatch, or to adjust values during time/date setting.
• LYS (nederst til højre): Aktiverer baggrundsbelysningen for at oplyse displayet.

3. Opsætning

Indstilling af tid og dato:

1. Fra den normale tidsvisning skal du trykke på MODE button three times until the seconds begin to flash. This indicates you are in time setting mode.
2. Tryk på NULSTIL knappen for at gennemgå indstillingerne: Sekunder → Timer → Minutter → Måned → Dato → Ugedag.
3. Mens den ønskede værdi blinker, tryk på ST / STP knappen for at justere værdien. Hold ST / STP at ændre værdier hurtigere.
4. Når alle indstillinger er korrekte, skal du trykke på MODE knappen for at afslutte indstillingstilstanden og vende tilbage til den normale tidsvisning.
5. For at skifte mellem 12-timers og 24-timers format skal du trykke på ST / STP button while the hours are flashing during time setting.

4. Driftsfunktioner

Alarm funktion:

1. Fra den normale tidsvisning skal du trykke på MODE Tryk én gang på knappen for at aktivere alarmtilstanden. Alarmtidspunktet vises.
2. Tryk på NULSTIL button to select the hour or minute digit you wish to set.
3. Brug ST / STP knappen for at justere det blinkende ciffer.
4. For at aktivere/deaktivere alarmen skal du trykke på ST / STP knappen i alarmtilstand (uden blinkende cifre). Et alarmikon vil vises/forsvinde på displayet.
5. For at aktivere/deaktivere hourly-klokken, tryk på NULSTIL button while in Alarm mode (without any digits flashing). A chime icon will appear/disappear.
6. Tryk på MODE knappen for at vende tilbage til den normale tidsvisning.

Stopur funktion:

1. Fra den normale tidsvisning skal du trykke på MODE button twice to enter the Stopwatch mode. The display will show '00:00:00'.
2. Tryk på ST / STP knappen for at starte stopuret.
3. Tryk på ST / STP knappen igen for at stoppe stopuret.
4. Tryk på NULSTIL knappen for at nulstille stopuret til '00:00:00'.
5. Tryk på MODE knappen for at vende tilbage til den normale tidsvisning.

Baggrundsbelysning:

• Tryk på LYS button (Bottom Right) to illuminate the display for a few seconds.

5. Vedligeholdelse

Water Resistance (10 Bar / 100m):

Your Calypso K5738/5 watch is water-resistant up to 10 Bar (100 meters), making it suitable for swimming and snorkeling. It is not designed for scuba diving. Avoid operating buttons underwater or exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water resistance seals.

Udskiftning af batteri:

When the display becomes dim or the watch stops functioning, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to ensure the watch's water resistance is maintained.

Rensning:

Clean your watch regularly with a soft, dry cloth. For stubborn dirt, a slightly damp en klud kan bruges, efterfulgt af tørring. Undgå at bruge kemiske rengøringsmidler eller slibende materialer.

6. Fejlfinding

• Skærmen er tom eller svag: Batteriet kan være lavt eller afladet. Se afsnittet om batteriudskiftning.
• Tidspunktet er forkert: The watch may need to be reset or the time re-adjusted. Follow the instructions in the Setting Time and Date section.
• Knapperne reagerer ikke: Ensure the watch is not exposed to extreme temperatures or strong impacts. If the issue persists, a professional inspection may be required.

7. Specifikationer

8. Garanti og support

For warranty information, please refer to the documentation provided with your purchase. For technical support or service, please contact your authorized Calypso retailer or visit the official Calypso webwebsted for servicecentres placeringer.