Indledning
Thank you for choosing the Xanlite FR350S Headlamp. This powerful and versatile LED headlamp is designed for various outdoor activities such as hiking, camping, and general use, providing reliable illumination with its 350 lumens output and long-lasting rechargeable battery. This manual provides essential information for the proper setup, operation, and maintenance of your device.
The FR350S features a robust design, multiple lighting modes, and a convenient USB-C rechargeable battery, ensuring you have light when you need it most. Please read this manual thoroughly before using the headlamp for at sikre sikker og optimal ydeevne.
Opsætning
1. Udpakning og indledende inspektion
Carefully remove the Xanlite FR350S Headlamp from its packaging. Inspect the device for any signs of damage. Ensure all components listed in the product description are present.
2. Fastgørelse af hovedremmen
Overskriftenamp comes with an adjustable elastic head strap. Thread the strap through the designated slots on the headlamp body. Adjust the strap to fit comfortably and securely around your head or helmet.
Figure 1: The Xanlite FR350S Headlamp with its adjustable head strap.
3. Oprindelig opkrævning
Før første brug anbefales det at oplade hovedtelefonerne helt.amp. Locate the USB-C charging port, typically covered by a protective flap. Connect the provided USB-C cable to the headlamp and the other end to a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
Figur 2: Overskriftamp connected for USB-C charging.
An indicator light will show the charging status. Once fully charged, disconnect the cable and ensure the protective flap is securely closed to prevent dust and moisture ingress.
Betjeningsvejledning
1. Tænd/sluk og valg af tilstand
The Xanlite FR350S features a single button for power control and mode cycling. Press the power button once to turn the headlamp on. Subsequent presses will cycle through the available lighting modes:
- Tilstand 1: High Brightness (350 lumens)
- Tilstand 2: Lav lysstyrke
- Tilstand 3: Strobe/blink
At dreje hovedetamp off, press and hold the power button for approximately 2-3 seconds in any mode.
Figure 3: Key features including 3 lighting modes and sensor.
2. Motion Sensor Function
The FR350S is equipped with a motion sensor for hands-free operation. To activate the sensor mode, double-press the power button quickly. A small indicator light (if present) may illuminate to confirm sensor activation. In sensor mode, you can wave your hand in front of the sensor to turn the light on or off without pressing the button.
To deactivate the sensor mode, double-press the power button again, or press and hold the button to turn off the headlamp fuldstændig.
3. Batteriautonomi
Overskriftenamp offers up to 6 hours of autonomy depending on the selected lighting mode. For optimal battery life, use lower brightness settings when maximum illumination is not required. Recharge the headlamp when the light dims significantly or the battery indicator shows low charge.
Opretholdelse
1. Rensning
For at rense hovedlamp, tør ydersiden af med en blød kludamp cloth. Do not use abrasive cleaners, solvents, or immerse the headlamp in water, as it is not waterproof. Ensure the charging port cover is securely closed before cleaning.
2. Opbevaring
When not in use for extended periods, store the headlamp in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery every 3-6 months to maintain its health, even if not in use.
3. Batteripleje
Det integrerede genopladelige batteri er designet til lang levetid. For at maksimere batteriets levetid:
- Undgå at aflade batteriet helt ofte.
- Udsæt ikke hovedetamp til ekstrem varme eller kulde.
- Use only the provided or a compatible USB-C cable for charging.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Headlamp tændes ikke. | Batteriet er afladet. | Oplad hovedetamp fuldt ud ved hjælp af USB-C-kablet. |
| Headlamp lyset er svagt. | Lav batteriopladning. | Genoplad hovedlamp. |
| Bevægelsessensoren reagerer ikke. | Sensor mode not activated or obstruction. | Double-press the power button to activate sensor mode. Ensure nothing is blocking the sensor. |
| Opladning virker ikke. | Defekt kabel eller strømkilde. | Prøv et andet USB-C-kabel eller en anden strømadapter. Sørg for, at opladningsporten er ren. |
Specifikationer
| Feature | Detalje |
|---|---|
| Model | FR350S |
| Mærke | Xanlite |
| Lysstyrke | 350 lumen |
| Autonomi | Op til 6 timer (afhængig af tilstand) |
| Strømkilde | Genopladeligt batteri (USB-C) |
| Særlige funktioner | Motion Detector, 3 Lighting Modes |
| Materiale | Metal |
| Vægt | 100 gram |
| Farve | Hvid |
Figure 4: Approximate dimensions of the Xanlite FR350S Headlamp.
Garanti og support
1. Produktgaranti
Xanlite products are manufactured to high quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Xanlite webwebsted. Gem din købsbevis til garantikrav.
2. Kundesupport
If you encounter any issues or have questions not covered in this manual, please contact Xanlite customer support. Contact details can typically be found on the product packaging or the official Xanlite webwebsted.
3. Genbrugsoplysninger
This product contains a rechargeable battery and electronic components. Do not dispose of it with household waste. Please follow local regulations for the recycling of electronic products and batteries. For more information on recycling light bulbs, please refer to relevant local guidelines.
Note: Information on recycling light bulbs and cleaning light bulbs is available in the product's important information section.
