APC Smart-UPS SMT750C Brugermanual

Produkt overview

The APC Smart-UPS SMT750C is a 750VA / 500W Sinewave Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for servers, switches, routers, and other networking devices. It features Automatic Voltage Regulation (AVR) to maintain stable power levels and includes APC SmartConnect for cloud-enabled remote monitoring and management.

Figur 1: Forside view of the APC Smart-UPS SMT750C, a compact tower design.

Nøglefunktioner omfatter:

• 750VA / 500W Pure Sine Wave UPS battery backup for critical equipment.
• Input: NEMA 5-15P. Output: (6) NEMA 5-15R outlets, including one switchable outlet group.
• Automatisk voltage-regulering (AVR) for at korrigere volumentage-udsving uden at bruge batteristrøm.
• APC SmartConnect for cloud-based remote monitoring, notifications, and firmware updates.
• Intelligent battery management with real-time monitoring and temperature-compensated charging.

Opsætning

Follow these steps to set up your APC Smart-UPS SMT750C:

1. Udpakning: Carefully remove the UPS unit and all accessories from the packaging. Verify that all components listed in the "What's in the Box" section are present.
2. Batteriforbindelse: The UPS unit comes with batteries included. Refer to the SmartConnect Installation Guide for specific instructions on connecting the internal batteries. Ensure the battery connector is securely seated.
3. Placering: Place the UPS in a cool, dry location, away from direct sunlight and heat sources. Ensure adequate ventilation around the unit. The unit is designed for tower placement.
4. Strømtilslutning: Plug the UPS power cord (NEMA 5-15P) directly into a grounded wall outlet. Avoid using extension cords or surge protectors with the UPS input.
5. Enhedsforbindelse: Connect your equipment (servers, switches, routers, etc.) to the NEMA 5-15R output receptacles on the rear of the UPS. Utilize the switchable outlet group for devices you wish to control remotely or shut down gracefully.
6. Indledende opkrævning: Allow the UPS to charge for at least 24 hours before connecting critical loads or performing any self-tests to ensure full battery capacity.
7. Netværksforbindelse (valgfrit): For SmartConnect features, connect an Ethernet cable from the UPS's SmartConnect Ethernet port to your network. Follow the SmartConnect Installation Guide for cloud monitoring setup.

Figur 2: Bagside view of the UPS, highlighting the NEMA 5-15R output receptacles and network port.

Betjeningsvejledning

Your Smart-UPS SMT750C is designed for ease of use. Here are basic operating procedures:

• Tænd/sluk: Tryk på tænd/sluk-knappen på frontpanelet for at tænde eller slukke UPS'en.
• LCD-skærm: The intuitive LCD interface provides real-time status updates including load percentage, battery capacity, estimated runtime, input/output voltage, and efficiency. Use the navigation buttons to scroll through different display screens and access menu options.
• Selv test: Periodically perform a self-test to ensure the UPS battery is functioning correctly. This can typically be initiated through the LCD menu or via the SmartConnect interface.
• Power Outage: I tilfælde af en magt outage, the UPS will automatically switch to battery power. The estimated runtime will be displayed on the LCD. For graceful shutdown of connected equipment, utilize the PowerChute Business Edition software (included on CD) or the SmartConnect features.
• Automatisk voltage Forordning (AVR): The UPS automatically adjusts high and low voltages to a safe level, protecting your connected devices without engaging the battery.

Figure 3: The UPS seamlessly integrated into a typical office workstation, providing power protection.

Opretholdelse

Proper maintenance ensures the longevity and optimal performance of your UPS:

• Udskiftning af batteri: The UPS features intelligent battery management that provides battery replacement recommendations. Batteries typically need replacement every 3-5 years, depending on usage and environmental conditions. Use only genuine APC replacement batteries.
• Rensning: Keep the UPS clean and free of dust. Use a dry cloth to wipe down the exterior. Do not use liquid cleaners or aerosols.
• Miljøforhold: Operate the UPS within the specified temperature and humidity ranges to prevent damage and ensure optimal battery life.
• Firmwareopdateringer: Regularly check for and apply firmware updates via the SmartConnect portal to ensure your UPS has the latest features and security enhancements.

Fejlfinding

This section provides solutions to common issues. For more detailed troubleshooting, refer to the full User Manual (PDF) or contact APC support.

Specifikationer

Garanti & Support

APC provides comprehensive warranty and support for your Smart-UPS SMT750C:

• UPS Warranty: 3 års reparation eller udskiftning (eksklusive batteri).
• Batterigaranti: 2 years for battery.
• Politik for beskyttelse af tilsluttet udstyr: Op til 150,000 dollars.
• SmartConnect Free Trial: For units purchased and/or registered after August 1, 2023, SmartConnect will be offered as a 6-month free trial.

For technical support, warranty claims, or additional information, please visit the official APC webwebstedet eller se kontaktoplysningerne i din produktdokumentation.

Inkluderet tilbehør

Your APC Smart-UPS SMT750C package includes:

• UPS enhed
• SmartConnect-installationsvejledning
• Brugermanual
• PowerChute Business Edition installations-cd
• User Documentation CD
• Sikkerhedsoplysninger
• Ethernet kabel
• USB kabel

Vigtige sikkerhedsoplysninger

Please read all safety instructions before installing or operating your UPS. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Always follow local regulations for battery disposal.

Produktvideoer

No official seller videos are available for this product at this time. Please refer to the written instructions and diagrams for guidance.